Manual for Brother CE1100PRW Sewing Machine

The Brother CE1100PRW is a computerized sewing machine with 110 built-in stitches, automatic needle threader, drop-in top bobbin system, LCD display, built-in monogramming fonts, and multiple presser feet. Features include one-step buttonhole, adjustable stitch length and width, free arm capability, and speed control slider. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 8. Maintenance & Cleaning 9. Accessories Included 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Computerized LCD display, automatic needle threader, drop-in bobbin system, built-in stitches, free arm, accessory storage.

Feature	Description
Built-in stitches	110 utility, decorative, and heirloom stitches
Automatic needle threader	Easy threading with push-pull mechanism
Drop-in top bobbin	Quick bobbin setup with clear cover
LCD display	Shows stitch selection and settings
One-step buttonhole	Automatic buttonhole sizing
Free arm	For sewing cuffs and sleeves
Speed control slider	Adjustable sewing speed
Built-in monogramming	Alphabet fonts for personalization
Presser feet	Multiple included feet for various techniques
LED lighting	Bright work area illumination

Installation & Setup

Unpack and inspect contents. Place on stable surface.

Remove packaging materials and protective covers
Attach power cord to machine and plug into outlet
Install foot controller in designated port
Wind and insert bobbin following threading diagram
Thread upper thread using automatic needle threader
Select straight stitch for initial testing

WARNING! Keep fingers away from needle area during operation. Always turn off when threading or changing accessories.

First-Time Operation

Power on machine; follow initial setup steps.

Turn power switch to ON position
LCD display will illuminate showing default settings
Select basic straight stitch using stitch selection dial
Place fabric under presser foot and lower foot lever
Gently press foot controller to begin sewing
Practice on scrap fabric to adjust tension and speed

CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.

Specifications

Stitches: 110 built-in stitches
Buttonholes: 10 one-step automatic styles
Needle Positions: Adjustable left/right
Stitch Length: Up to 5mm maximum
Stitch Width: Up to 7mm maximum
Bobbin: Drop-in top loading system
Speed: Up to 850 stitches per minute
Lighting: LED work area light
Power Supply: 120V AC, 60Hz
Weight: 13.2 lbs (6 kg)

Controls and Settings

Access functions via LCD display and control buttons. Front Panel: Power switch, stitch selection, reverse button, needle up/down.

Display: Shows stitch number, length, width, and recommended foot. Stitch Selection: Turn dial to choose from 110 stitches. Reverse: Hold for reinforcement stitching. Speed Control: Slider for sewing speed adjustment. Automatic Needle Threader: Push-pull mechanism for easy threading.

Settings: Stitch length (0-5mm), stitch width (0-7mm), needle position, thread tension (automatic), presser foot pressure.

Stitch Selection

Choose from 110 built-in stitches including utility, decorative, and quilting stitches.

Turn stitch selection dial to desired stitch number
LCD display shows stitch image and number
Adjust stitch length and width as needed
Select appropriate presser foot for chosen stitch
Test stitch on scrap fabric before sewing project
For buttonholes: Select buttonhole stitch, place button in foot, machine automatically sizes

Tip: Refer to stitch guide for recommended uses and settings.

Threading & Bobbin

Automatic needle threader and drop-in bobbin system for easy setup.

Raise presser foot and raise needle to highest position
Follow numbered threading path on machine
Use automatic needle threader: Push lever down, hook thread, pull back
Wind bobbin: Place thread on spool pin, wind following guide arrows
Insert bobbin: Drop into compartment with thread clockwise
Pull thread through slot and under tension spring

WARNING! Always turn power off when threading or changing bobbin.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Unplug machine before cleaning
Remove needle plate to clean lint and dust
Use small brush to clean bobbin area
Oil moving parts as indicated in manual (sparingly)
Wipe exterior with soft, dry cloth
Store with needle in highest position and presser foot lowered

CAUTION! Never use compressed air; it can force lint deeper into mechanism.

Accessories Included

Standard accessories provided with Brother CE1100PRW:

Standard zigzag foot
Buttonhole foot
Zipper foot
Button sewing foot
Overcasting foot
Monogramming foot
Blind stitch foot
Walking foot
Quilting foot
Seam ripper/brush
Additional needles
Bobbin (4 total)
Screwdriver

Warranty Information

Brother International Corporation: 25-year limited warranty. Coverage includes defects in materials/workmanship. Normal wear, misuse, or commercial use not covered. For warranty service, contact Brother Customer Support with proof of purchase. Copyright © 2023 Brother Industries, Ltd. For support, visit www.brother-usa.com or contact 1-877-467-4289.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not running	Power connection/foot control	Check power cord; ensure foot controller plugged in; check power switch.
Thread bunching	Threading/tension	Rethread completely; check bobbin insertion; adjust tension.
Needle breaking	Wrong needle/bent needle	Replace needle; ensure correct size for fabric; check for obstruction.
Uneven stitches	Tension/thread quality	Adjust upper tension; use quality thread; check needle condition.
Fabric not feeding	Presser foot/feed dogs	Lower presser foot; clean feed dogs; check stitch length setting.

Reset: Turn power off and on to reset computerized functions.

Service: 1-877-467-4289; www.brother-usa.com