Manual for 930 Bernina Sewing Machine

The Bernina 930 is a high-quality electronic sewing machine featuring advanced stitch patterns, automatic buttonholing, precision stitching capabilities, built-in needle threader, adjustable stitch length and width, free arm capability, multiple presser feet options, and electronic speed control. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Maintenance & Cleaning 8. Accessories 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, built-in needle threader, free arm, stitch selection dial, bobbin winder, presser foot lever, reverse stitch button.

Feature	Description
Electronic control panel	For stitch pattern selection and settings
Built-in needle threader	Automatic needle threading assistance
Free arm capability	For sewing sleeves and circular items
Stitch selection dial	Choose from multiple stitch patterns
Bobbin winder	Automatic bobbin winding system
Presser foot lever	Raises and lowers presser foot
Reverse stitch button	For reinforcing stitches
Stitch length control	Adjustable stitch length settings
Stitch width control	Adjustable stitch width settings
Foot pedal	Electronic speed control

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

Remove protective covers and packaging materials.
Place machine on flat, stable surface at comfortable height.
Connect foot pedal to machine and place on floor.
Plug power cord into electrical outlet.
Install needle and thread according to threading diagram.
Wind and insert bobbin following manual instructions.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable placement.

First-Time Operation

Power on machine; follow initial setup procedures.

Turn power switch to ON position.
Select basic straight stitch using stitch dial.
Practice stitching on scrap fabric to test settings.
Adjust stitch length and width as needed.
Test reverse stitching function.
Practice with different presser feet included.

CAUTION! Keep fingers away from moving needle. Always use proper lighting.

Specifications

Machine Type: Electronic sewing machine
Stitch Patterns: Multiple built-in stitches including decorative
Buttonhole: Automatic one-step buttonholer
Needle Positions: Multiple needle position settings
Speed Control: Electronic foot pedal with variable speed
Bobbin System: Front-loading bobbin case
Presser Feet: Multiple interchangeable feet included
Power Source: Standard household electrical outlet
Weight: Approximately 22 lbs (10 kg)
Warranty: Limited manufacturer warranty

Controls and Settings

Access functions via control panel and mechanical controls. Front Panel: Power switch, stitch selection dial, stitch length control, stitch width control.

Additional Controls: Reverse stitch button, bobbin winder, presser foot lever, hand wheel, free arm release.

Stitch Settings: Straight stitch, zigzag, decorative stitches, stretch stitches, buttonhole. Tension Control: Upper thread tension dial. Needle: Up/down position control. Feed Dogs: Drop feed dogs for free-motion sewing.

Stitch Selection

Supports multiple stitch patterns for various sewing applications.

Straight Stitch: Basic sewing, topstitching, basting
Zigzag Stitch: Seam finishing, appliqué, stretch fabrics
Decorative Stitches: Ornamental sewing, embellishments
Buttonhole: Automatic one-step buttonholes
Blind Hem: Nearly invisible hemming
Overcast: Seam finishing to prevent fraying
Elastic Stitch: For sewing elastic and stretch fabrics

Tip: Always test stitch on scrap fabric before sewing project.

Maintenance & Cleaning

Unplug machine before cleaning and maintenance.

Clean lint from bobbin area after each project
Oil machine according to maintenance schedule
Wipe exterior with soft, dry cloth
Replace needle regularly (every 8-10 hours of sewing)
Check and clean feed dogs periodically
Store machine with cover when not in use

CAUTION! Use only Bernina recommended oils and cleaning tools.

Accessories

Standard accessories included: Multiple presser feet, bobbins, needles, seam ripper, brush, screwdriver, instruction manual.

Accessory	Purpose
All-purpose foot	General sewing
Zipper foot	Installing zippers
Buttonhole foot	Automatic buttonholes
Blind hem foot	Nearly invisible hems
Overedge foot	Seam finishing
Additional bobbins	Extra bobbin supply
Needle set	Various needle types

Safety Information

Always disconnect power when changing needles, cleaning, or not in use. Keep fingers away from moving needle. Use proper lighting. Do not operate with damaged cord. Keep machine dry and away from moisture.

WARNING! Never leave machine unattended when plugged in. Keep away from children.

Regulatory Information

Complies with international safety standards for electrical sewing machines. Copyright © Bernina International AG. All rights reserved. For technical support and service, contact authorized Bernina dealers or visit www.bernina.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord; ensure outlet works; check power switch.
Thread breaking	Tension/needle issues	Re-thread machine; check tension; replace needle.
Uneven stitches	Tension/threading	Re-thread both upper and bobbin threads; adjust tension.
Machine jams	Thread buildup	Remove bobbin case; clean area; re-thread properly.
Needle breaks	Wrong needle/bent needle	Replace needle; ensure correct type and installation.
Fabric not feeding	Feed dogs lowered	Raise feed dogs; check stitch length setting.
Unusual noise	Lint/damage	Clean machine thoroughly; check for loose parts.

Service: Contact authorized Bernina service center for repairs.

Support: www.bernina.com or local authorized dealer