Manual for 930 Bernina Sewing Machine 930 Record Sewing Machine

The Bernina 930 Record is a high-quality mechanical sewing machine known for its durability, precision stitching, and versatile features. This Swiss-made machine offers straight stitch, zigzag, and decorative patterns, with adjustable stitch length and width, built-in buttonholer, free arm capability, and various presser feet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Threading and Bobbin 7. Stitch Selection 8. Maintenance 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Mechanical sewing head, built-in stitch patterns, free arm, bobbin winder, stitch length/width dials, reverse stitch lever, presser foot pressure adjustment.

FeatureDescription
Stitch patternsStraight, zigzag, decorative stitches
Stitch length dialAdjustable from 0-4 mm
Stitch width dialAdjustable from 0-5 mm for zigzag
Free armFor sewing sleeves and cuffs
Built-in buttonholerOne-step automatic buttonholes
Reverse stitch leverFor reinforcing seams
Presser foot pressureAdjustable for different fabrics
Bobbin systemFront-loading bobbin
Power pedalVariable speed control
LightingBuilt-in work light

Installation

Unpack and inspect contents. Place on stable sewing table.

  1. Remove protective packaging and foam inserts.
  2. Position machine on flat, stable surface at comfortable height.
  3. Connect power cord to machine and plug into wall outlet.
  4. Install foot pedal and position for comfortable access.
  5. Attach accessory box and ensure all parts are present.

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Setup

Prepare machine for first use with proper threading and bobbin winding.

  1. Wind bobbin: Place thread on spool pin, guide through tension, wind onto bobbin.
  2. Insert bobbin: Place in bobbin case with thread pulling counterclockwise.
  3. Thread upper thread: Follow numbered guides from spool to needle.
  4. Select straight stitch with medium length (2.5) for testing.
  5. Test stitch on scrap fabric to ensure proper tension.

CAUTION! Always raise needle to highest position before threading.

Specifications

Controls and Settings

Main controls located on right side of machine body.

Stitch Selector: Dial for choosing stitch patterns (straight, zigzag, decorative).

Stitch Length Dial: Controls distance between stitches (0-4 mm).

Stitch Width Dial: Adjusts zigzag width (0-5 mm).

Reverse Stitch Lever: Hold down for backstitching.

Presser Foot Lever: Raises and lowers presser foot.

Handwheel: Manual control of needle position.

Tension Dial: Adjusts upper thread tension (0-9).

Threading and Bobbin

Proper threading is essential for quality stitches.

  1. Raise presser foot and turn handwheel to highest needle position.
  2. Place thread spool on pin and guide through first thread guide.
  3. Pass thread through tension discs from right to left.
  4. Thread take-up lever from right to left through eye.
  5. Guide through remaining thread guides to needle.
  6. Thread needle from front to back.
  7. For bobbin: Wind evenly, insert with thread pulling counterclockwise.

Tip: Pull both threads under presser foot before starting to sew.

Stitch Selection

Various stitches for different sewing applications.

  1. Straight stitch: For seams, topstitching (length 2.0-3.0)
  2. Zigzag stitch: For finishing edges, stretch fabrics
  3. Decorative stitches: Use pattern selector dial
  4. Buttonhole: Select buttonhole setting, one-step operation
  5. Blind hem: Use blind hem foot and appropriate setting
  6. Elastic stitch: For sewing elastic and stretch fabrics

WARNING! Always test stitch on scrap fabric first. Use appropriate needle for fabric type.

Maintenance

Regular cleaning and oiling for optimal performance.

  1. Clean lint from bobbin area after each project.
  2. Oil moving parts every 8-10 hours of use with sewing machine oil.
  3. Wipe exterior with soft, dry cloth.
  4. Replace needle regularly (every 8-10 hours of sewing).
  5. Check belt tension periodically.

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Accessories

Standard accessories included with Bernina 930 Record.

AccessoryPurpose
Zigzag footGeneral sewing
Buttonhole footAutomatic buttonholes
Zipper footInstalling zippers
Blind hem footInvisible hemming
Overedge footFinishing seam edges
Bobbin (3)Extra bobbins
NeedlesAssorted sizes
Seam ripperRemoving stitches
BrushCleaning lint
ScrewdriversAdjustments

Regulatory Information

BERNINA and 930 Record are registered trademarks. Manufactured by BERNINA International AG in Switzerland. For service and support, contact authorized BERNNA dealers. Safety certified according to international standards. Keep manual for future reference.

Troubleshooting

SymptomPossible CauseCorrective Action
Thread breakingIncorrect threading/tensionRe-thread completely; adjust tension; check for burrs on needle.
Skip stitchesWrong needle/bent needleReplace needle; ensure correct needle for fabric type.
Bobbin thread bunchingIncorrect bobbin insertionRemove and reinsert bobbin; ensure thread pulls counterclockwise.
Machine not feedingPresser foot pressureAdjust presser foot pressure; clean feed dogs.
Noisy operationLack of oil/lint buildupClean and oil machine; check for loose parts.

Service: Contact authorized BERNINA service center for repairs.

Support: Visit www.bernina.com for technical assistance and parts.

Manual for 930 Bernina Sewing Machine 930 Record Sewing Machine © - All Rights Reserved 2025