Lervia 564 Sewing Machine Manual

The Lervia 564 is a versatile sewing machine designed for home use, featuring multiple stitch patterns, adjustable stitch length and width, built-in needle threader, automatic bobbin winding, free arm capability, LED lighting, and variable speed control. Powered by 110-120V AC, this machine is suitable for various fabrics from lightweight to medium-weight materials. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Sewing machine head, foot pedal, power cord, accessory box with presser feet, bobbins, needles, and seam ripper.

Installation & Setup

Unpack and inspect all components. Place on stable, flat surface.

1. Remove protective packaging and covers from machine.
2. Connect foot pedal to machine and power outlet.
3. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.
4. Wind bobbin: Place bobbin on winder, thread through guide, press foot pedal to wind.
5. Insert bobbin: Open bobbin case, insert bobbin with thread unwinding counterclockwise.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Plug in machine and turn on power switch.

1. Thread upper thread: Follow numbered guides from spool to needle.
2. Use built-in needle threader for easy threading.
3. Pull up bobbin thread: Hold upper thread, turn hand wheel toward you to bring up bobbin thread.
4. Select basic straight stitch for initial testing.
5. Place fabric under presser foot, lower foot, and begin sewing with gentle foot pedal pressure.

CAUTION! Always lower presser foot before sewing. Keep hands clear of moving needle.

Specifications

• Model: Lervia 564
• Stitch Patterns: 12 built-in stitches
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Maximum Sewing Speed: 800 stitches per minute
• Needle Positions: Left, center, right
• Bobbin Type: Class 15 transparent bobbin
• Needle Size: 75/11 - 90/14
• Power Requirements: 110-120V AC, 60Hz
• Machine Weight: 12.5 lbs (5.7 kg)

Controls and Settings

Main controls located on front and side of machine.

Stitch Selection Dial: Turn to select desired stitch pattern (1-12).

Stitch Length Dial: Adjust from 0 (darning) to 4mm (basting).

Stitch Width Dial: Adjust zigzag and decorative stitch width 0-5mm.

Reverse Stitch Button: Press and hold for backward stitching.

Power Switch: On/off control with LED indicator.

Hand Wheel: Manual control for precise needle positioning.

Stitch Selection

Available stitch patterns and recommended uses:

1. Straight Stitch: Basic sewing, seams
2. Zigzag Stitch: Stretch fabrics, finishing edges
3. 3-Step Zigzag: Elastic application, overcasting
4. Blind Hem: Nearly invisible hems
5. Buttonhole: Automatic 4-step buttonholes
6. Stretch Stitch: Knits and stretch fabrics
7. Decorative Stitches: 6 patterns for embellishment

Tip: Test stitches on scrap fabric before sewing project.

Threading & Bobbin

Proper threading ensures smooth operation.

1. Upper Threading: Raise presser foot, place spool on pin, follow numbered guides to needle.
2. Needle Threader: Push lever down, hook thread through guide, pull back to thread needle.
3. Bobbin Winding: Place empty bobbin on winder, thread through tension disc, press pedal.
4. Bobbin Insertion: Open bobbin cover, insert with thread unwinding counterclockwise.
5. Thread Drawing: Hold upper thread, turn hand wheel to bring up bobbin thread.

WARNING! Ensure machine is unplugged during threading and maintenance.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Remove lint from bobbin area and feed dogs with brush.
2. Weekly: Oil hook race and moving parts with sewing machine oil.
3. Monthly: Check needle for damage and replace if bent or dull.
4. As needed: Clean exterior with soft, dry cloth.

CAUTION! Use only sewing machine oil. Never use household oils.

Accessories

Included accessories and their uses:

Safety Information

Important safety precautions for operation.

• Always unplug machine when not in use or during maintenance
• Keep fingers away from moving needle and feed dogs
• Use proper needle size for fabric type
• Do not pull fabric while sewing - let feed dogs move fabric
• Keep work area well-lit and organized
• Store machine in dry area away from moisture

WARNING! Never operate with damaged power cord or while wet.

Troubleshooting

Service: For technical support, contact Lervia Customer Service at 1-800-555-1234 or visit www.lervia.com