Kenmore Mini Ultra Sewing Machine User Manual

The Kenmore Mini Ultra Sewing Machine is a compact, portable sewing machine designed for home use with features including multiple stitch patterns, adjustable stitch length and width, built-in needle threader, free arm capability, automatic bobbin winding, built-in LED light, and easy stitch selection dial. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection Guide 7. Threading & Bobbin Winding 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Compact sewing machine body, stitch selection dial, built-in LED light, free arm, accessory compartment, foot pedal, power adapter.

Feature	Description
Stitch Selection Dial	Select from multiple built-in stitch patterns
Built-in Needle Threader	Easy threading assistance
Free Arm Capability	For sewing cuffs and sleeves
Automatic Bobbin Winding	Quick and easy bobbin preparation
LED Work Light	Illuminates sewing area
Adjustable Stitch Length	Customize stitch length from 0-4mm
Adjustable Stitch Width	Zigzag and decorative stitch width control
Reverse Stitch Lever	For reinforcing seams
Foot Pedal Control	Variable speed control
Accessory Storage	Built-in compartment for feet and tools

Installation & Setup

Unpack and inspect all components. Place on stable, flat surface.

Remove machine from packaging and all protective materials
Connect foot pedal to machine and power outlet
Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw
Wind bobbin: Follow automatic bobbin winding procedure
Thread machine: Follow threading guide printed on machine
Plug into AC power outlet

WARNING! Keep fingers away from needle area during operation. Always turn off and unplug when not in use.

First-Time Operation

Power on machine; test basic functions.

Select straight stitch: Turn dial to straight stitch position
Practice on scrap fabric: Use medium speed with foot pedal
Test reverse stitching: Hold reverse lever while sewing
Adjust stitch length: Turn length dial for shorter/longer stitches
Test zigzag stitch: Select zigzag pattern and adjust width

CAUTION! Always start with needle in highest position. Use proper needle for fabric type.

Specifications

Machine Type: Compact Electric Sewing Machine
Stitch Patterns: 10 built-in stitches including straight, zigzag, blind hem, stretch stitches
Stitch Length: Adjustable 0-4mm
Stitch Width: Adjustable 0-5mm for zigzag stitches
Bobbin: Front-loading, class 15 transparent bobbin
Needle: Standard domestic sewing machine needles
Free Arm: Yes, removable accessory compartment
Lighting: Built-in LED work light
Power Source: 120V AC, 60Hz
Included Accessories: All-purpose foot, zipper foot, buttonhole foot, seam ripper, needles, bobbins, duster brush

Controls and Settings

Main controls located on machine body: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch lever, bobbin winder, hand wheel.

Stitch Selection: Turn dial to select desired stitch pattern. Stitch Length: Adjust for shorter (0) to longer (4) stitches. Stitch Width: Adjust zigzag and decorative stitch width. Reverse Stitch: Hold lever back to sew in reverse for seam reinforcement. Bobbin Winding: Push bobbin winder to right position, press foot pedal to wind.

Stitch Selection Guide

Available stitch patterns and recommended uses:

Straight Stitch: Basic sewing, seams (length 2.5mm recommended)
Zigzag Stitch: Finishing edges, stretch fabrics, appliqué
Blind Hem Stitch: Nearly invisible hems on garments
Stretch Stitch: Knits and stretch fabrics
Decorative Stitches: Various patterns for embellishment
Buttonhole Stitch: One-step automatic buttonholes

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin Winding

Proper threading ensures smooth operation.

Upper Threading: Follow numbered guide on machine - spool pin, thread guides, tension discs, take-up lever, needle
Bobbin Winding: Place spool on pin, thread through bobbin winder tension, place empty bobbin on winder, push winder to engage, press foot pedal
Bobbin Insertion: Open bobbin cover, insert bobbin with thread unwinding counterclockwise, pull thread through slot
Needle Threading: Use built-in needle threader or thread manually from front to back

WARNING! Ensure machine is turned off during threading. Raise presser foot when threading upper thread.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean lint and dust from bobbin area after each project
Oil moving parts as recommended in manual (use sewing machine oil only)
Replace needle regularly or after 8 hours of sewing
Check and clean feed dogs
Store in dry area, cover when not in use

CAUTION! Always unplug machine before cleaning or maintenance. Use only recommended oils.

Regulatory Information

UL Listed: Certified for safety standards. FCC Part 15: Class B digital device compliance. Copyright © 2006 Kenmore; trademarks of Sears Brands, LLC. For technical support, visit www.kenmore.com or contact 1-800-469-4669. Made for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Re-thread completely; adjust tension; check for burrs on needle
Skipped stitches	Bent needle/wrong needle	Replace needle; ensure correct needle type for fabric
Machine jams	Thread buildup	Turn off; remove bobbin; clean bobbin area; re-thread
Uneven stitches	Tension issues	Adjust upper tension; re-thread bobbin; check bobbin tension
No power	Power connection	Check power cord; ensure foot pedal connected; check outlet
Bobbin won't wind	Winder not engaged	Push bobbin winder fully to right; ensure bobbin seated properly

Reset: Turn off machine, wait 30 seconds, restart.

Service: 1-800-469-4669; www.kenmore.com