Kenmore Limited Edition Sewing Machine Manual

The Kenmore Limited Edition Sewing Machine is a versatile household sewing machine featuring multiple stitch patterns, automatic needle threading, adjustable stitch length and width, built-in buttonholer, free arm capability, drop feed for quilting, LED lighting, and easy bobbin winding system. Powered by 120V AC, this machine is designed for both beginners and experienced sewers with its user-friendly controls and comprehensive features. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection Guide 7. Threading & Bobbin Winding 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Sewing machine head, Free arm, Stitch selection dial, Thread tension dial, Bobbin winder, Presser foot, LED work light, Foot pedal, Power cord.

Feature	Description
Automatic needle threader	Easy threading without eye strain
Built-in stitch patterns	Multiple decorative and utility stitches
One-step buttonholer	Automatic buttonhole creation
Free arm capability	For sewing cuffs and sleeves
Drop feed mechanism	For quilting and free-motion sewing
LED work light	Bright illumination of work area
Adjustable stitch length	0-4mm range for different fabrics
Adjustable stitch width	0-5mm for zigzag and decorative stitches
Reverse stitch lever	For reinforcing seams
Bobbin winding system	Built-in bobbin winder with automatic stop

Installation & Setup

Unpack and inspect all components. Place on stable, flat surface.

Remove machine from packaging: Lift carefully from carrying case.
Attach power cord: Plug into machine and wall outlet (120V AC).
Install foot pedal: Connect to machine and place on floor.
Set up free arm: Remove accessory storage compartment if needed.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Follow these steps for initial setup and threading.

Wind bobbin: Place thread on spool pin, guide through bobbin winder tension.
Thread upper needle: Use automatic threader or manual threading guide.
Insert bobbin: Drop bobbin into case with thread unwinding counterclockwise.
Select stitch: Turn stitch selection dial to desired pattern.
Adjust settings: Set stitch length and width according to fabric type.
Test sew: Use scrap fabric to check tension and stitch quality.

CAUTION! Always start with needle in highest position. Keep hands clear of moving parts.

Specifications

Machine Type: Limited Edition Household Sewing Machine
Stitch Patterns: 20 built-in stitches including straight, zigzag, decorative
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable for zigzag stitches
Buttonholes: One-step automatic
Needle System: HA-1 standard domestic needles
Bobbin Type: Class 15 transparent bobbin
Lighting: LED work light
Power Source: 120V AC, 60Hz
Warranty: Limited 25-year warranty

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, Stitch length dial, Stitch width dial, Reverse stitch lever, Bobbin winder stop.

Settings: Thread tension dial (0-9), Presser foot pressure adjustment, Feed dog drop lever, Needle position selector. Stitch patterns include: Straight stitch, Zigzag, Blind hem, Elastic stitch, Multiple decorative stitches, Buttonhole stitch.

Stitch Selection Guide

Select appropriate stitches for different sewing projects.

Straight stitch (00): General sewing, seams
Zigzag stitch (01-04): Finishing edges, stretch fabrics
Blind hem (05): Nearly invisible hems
Elastic stitch (06): Sewing elastic, decorative effects
Decorative stitches (07-19): Embellishments, quilting
Buttonhole (20): Automatic one-step buttonholes

Tip: Always test stitch on scrap fabric before starting project.

Threading & Bobbin Winding

Proper threading ensures smooth operation.

Upper threading: Follow numbered guides from spool to needle.
Automatic needle threading: Lower lever, hook thread, raise lever.
Bobbin winding: Place bobbin on winder, guide thread, press pedal.
Bobbin insertion: Open cover, drop in bobbin, pull thread through slot.
Bring up bobbin thread: Hold upper thread, turn handwheel toward you.

WARNING! Ensure machine is unplugged during threading. Keep fingers away from needle.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Brush out lint from bobbin area and feed dogs.
Weekly: Oil moving parts with sewing machine oil (2-3 drops).
Monthly: Clean tension discs with soft brush.
As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Unplug machine before cleaning. Use only sewing machine oil.

Regulatory Information

UL Listed: Complies with UL Standard 1278. FCC Part 15: Class B digital device. Copyright © Kenmore Sewing Products. All rights reserved. For technical support, visit www.kenmoresewing.com or contact 1-800-426-9225. Made for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread completely; adjust tension; check for burrs on needle.
Skip stitches	Wrong needle/bent needle	Replace needle; ensure correct needle type for fabric.
Bobbin thread bunching	Incorrect bobbin threading	Rethread bobbin; ensure bobbin turns counterclockwise.
Machine not running	Power/pedal issues	Check power cord; ensure pedal is plugged in; check fuse.
Uneven stitches	Tension issues	Adjust upper and bobbin tension; clean tension discs.
Needle breaking	Wrong needle/bent needle	Use correct needle size; replace bent needle; don't pull fabric.

Service: 1-800-426-9225; www.kenmoresewing.com