Jones Brother Zig Zag Sewing Machine Manual

The Jones Brother Zig Zag Sewing Machine is a versatile mechanical sewing machine featuring zig zag stitching capabilities, multiple stitch patterns, adjustable stitch length and width, built-in buttonholer, free arm design, reverse stitching function, built-in light, foot pedal control, and accessory storage. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 8. Maintenance & Cleaning 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Zig zag stitch mechanism, Stitch pattern selector, Tension control, Bobbin case, Presser foot, Feed dogs, Built-in light, Foot pedal, Accessory compartment.

Feature	Description
Zig Zag Stitch	Adjustable width for decorative and functional stitching
Stitch Pattern Selector	Dial for selecting different stitch patterns
Tension Control	Adjusts thread tension for different fabrics
Bobbin Case	Front-loading bobbin system
Presser Foot	Standard zig zag foot with pressure adjustment
Feed Dogs	Adjustable for different fabric feeding
Built-in Light	Illuminates sewing area
Foot Pedal	Variable speed control
Reverse Stitch	Reinforces seam beginnings and endings
Stitch Length Control	Adjusts stitch length from 0-4mm

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

Position machine: Place on sturdy table with adequate workspace.
Connect power: Plug foot pedal into machine, then plug into AC outlet.
Install needle: Loosen needle clamp, insert needle with flat side to back, tighten.
Wind bobbin: Follow bobbin winding instructions in threading section.
Thread machine: Follow threading path indicated on machine.

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Operation

Power on machine; test basic functions.

Select straight stitch: Turn pattern selector to straight stitch position.
Set stitch length: Adjust to medium setting (2.5mm).
Thread machine: Follow numbered threading guide on machine.
Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
Test sew: Use scrap fabric to test stitching and tension.
Adjust tension: If stitches are loose or tight, adjust tension dial.

CAUTION! Always start with needle in highest position. Keep hands clear of moving parts.

Specifications

Machine Type: Mechanical Zig Zag Sewing Machine
Stitch Types: Straight, Zig Zag, Multiple decorative stitches
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable for zig zag
Buttonhole: 4-step built-in buttonholer
Bobbin: Class 15 front-loading
Needle System: 15x1 household needles
Presser Feet: Standard zig zag foot included
Power Source: 120V AC, 60Hz
Free Arm: Yes, for sewing cuffs and sleeves

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch pattern selector, Stitch length control, Stitch width control, Reverse stitch button, Tension dial.

Stitch Selection: Turn pattern dial to select desired stitch. Stitch Length: 0-4mm for straight stitches, shorter for zig zag. Stitch Width: 0-5mm for zig zag and decorative stitches. Tension: Adjust for different fabric types and thread weights. Reverse: Hold button for backstitching.

Stitch Selection

Multiple stitch patterns available via selector dial.

Straight Stitch: Basic sewing, topstitching, basting
Zig Zag Stitch: Seam finishing, appliqué, stretch fabrics
Blind Hem: Nearly invisible hemming
Elastic Stitch: For elastic application and stretch fabrics
Decorative Stitches: Various patterns for embellishment
Buttonhole: 4-step process for perfect buttonholes

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin

Proper threading essential for good stitch quality.

Raise needle: Turn handwheel to highest position.
Place spool: Put thread spool on spindle.
Follow guide: Thread through numbered path on machine.
Thread needle: From front to back, leave 4-6 inch tail.
Wind bobbin: Place empty bobbin on winder, engage mechanism.
Insert bobbin: Drop into case with thread unwinding counterclockwise.
Pull up bobbin thread: Hold needle thread, turn handwheel to bring up bobbin thread.

WARNING! Ensure machine is unplugged during threading to prevent accidental starting.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Brush out lint from bobbin area and feed dogs.
Weekly: Oil moving parts with sewing machine oil.
Monthly: Clean race hook and tension discs.
Needles: Replace after 8-10 hours of sewing or if damaged.
Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Use only sewing machine oil. Never use household oils.

Safety Information

Always follow safety guidelines to prevent injury.

Unplug machine when not in use and during maintenance
Keep fingers away from needle area during operation
Do not sew over pins - remove them before they reach needle
Use proper lighting to see sewing area clearly
Keep hair and loose clothing away from moving parts
Do not operate if cord or foot pedal is damaged

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread completely; adjust tension; check for burrs on needle.
Skipped stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle type for fabric.
Uneven stitches	Tension imbalance	Adjust upper and bobbin tension; rethread both.
Machine jams	Thread buildup/lint	Remove bobbin case; clean race hook area; rethread.
Noise/vibration	Lint/lack of oil	Clean and oil machine; check for loose parts.
Needle breaks	Bent needle/wrong size	Replace needle; ensure proper insertion; use correct size.

Service: For professional repair, contact authorized Jones Brother service center.

Support: 1-800-SEW-HELP; www.jonesbrothersewing.com