Jones Brother Sewing Machine Manual

The Jones Brother Sewing Machine is a versatile mechanical sewing device featuring multiple stitch patterns, adjustable stitch length and width, built-in needle threader, drop-in bobbin system, free arm capability, built-in LED lighting, and various presser feet attachments. Powered by 120V AC with foot pedal control. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection Guide 7. Threading and Bobbin 8. Maintenance & Cleaning 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Mechanical sewing head, Foot pedal controller, Built-in LED light, Drop-in bobbin system, Free arm capability, Multiple presser feet.

Feature	Description
Stitch patterns	12 built-in stitches including straight, zigzag, and decorative
Stitch length control	Adjustable from 0-4mm
Stitch width control	Adjustable from 0-5mm
Built-in needle threader	Easy threading assistance
Drop-in bobbin	Top-loading bobbin system with clear cover
Free arm	Convertible for sewing sleeves and cuffs
LED lighting	Built-in work area illumination
Reverse stitch	Button for reinforcing stitches
Presser feet	Includes zipper, buttonhole, and general purpose feet
Power input	120V AC power adapter

Unpacking and Setup

Unpack and inspect all components. Place on stable, level surface.

Remove machine from packaging: Lift carefully from carrying case.
Position machine: Place on sturdy table with adequate workspace.
Connect foot pedal: Plug into machine's foot pedal port.
Connect power: Plug power adapter into machine and wall outlet.
Install accessories: Attach presser foot and thread spool pin.

WARNING! Machine is heavy; lift with both hands. Ensure stable surface to prevent tipping.

First-Time Operation

Power on machine; follow setup procedure.

Thread machine: Follow threading guide from spool to needle.
Wind bobbin: Use built-in bobbin winder with desired thread.
Insert bobbin: Place bobbin in drop-in compartment following arrow direction.
Select stitch: Choose appropriate stitch pattern for your project.
Test sew: Use scrap fabric to test stitch quality and tension.

CAUTION! Keep fingers away from moving needle. Always turn off when not in use.

Specifications

Machine Type: Mechanical sewing machine
Stitch Patterns: 12 built-in stitches
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Maximum Sewing Speed: 800 stitches per minute
Needle System: HA-1 standard needles
Bobbin Type: Class 15 transparent bobbins
Presser Feet: 4 included (general, zipper, buttonhole, button)
Lighting: LED work light
Power Source: 120V AC, 60Hz
Dimensions: 15.2" x 6.7" x 11.8"
Weight: 12.3 lbs

Controls and Settings

Main controls located on front and side panels. Stitch selection dial, stitch length dial, stitch width dial, reverse button, bobbin winder.

Stitch Selection: Turn dial to choose from 12 stitch patterns. Stitch Length: Adjust for shorter/longer stitches. Stitch Width: Adjust for zigzag and decorative stitches. Reverse: Hold button for backstitching. Tension Control: Adjust thread tension dial (3-6 recommended).

Stitch Selection Guide

Choose appropriate stitch for your fabric and project type.

Straight Stitch: Basic sewing, seams (length 2.0-2.5mm)
Zigzag Stitch: Stretch fabrics, finishing edges (width 3-4mm)
Blind Hem: Nearly invisible hems on garments
Elastic Stretch: For elastic and knit fabrics
Decorative Stitches: 8 decorative patterns for embellishment

Tip: Test stitch on fabric scrap before starting project.

Threading and Bobbin

Proper threading ensures smooth operation.

Raise needle: Turn handwheel to highest position.
Place spool: Put thread on spool pin with spool cap.
Follow guide: Thread through upper threading path.
Use needle threader: Lower lever and hook thread through needle.
Wind bobbin: Place empty bobbin on winder, guide thread, press pedal.
Insert bobbin: Drop bobbin in compartment following directional arrow.

WARNING! Ensure machine is off during threading. Pull thread gently.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Brush out lint from bobbin area and feed dogs.
Weekly: Oil moving parts with sewing machine oil (2-3 drops).
Monthly: Clean race hook and check for thread buildup.
As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Unplug machine before cleaning. Use only sewing machine oil.

Accessories

Included accessories for various sewing tasks.

Accessory	Use
General Purpose Foot	Standard sewing
Zipper Foot	Installing zippers
Buttonhole Foot	Creating buttonholes
Button Sewing Foot	Attaching buttons
Spool Caps (2)	Hold thread spools
Bobbins (4)	Extra bobbins
Needles (5)	Assorted replacement needles
Seam Ripper	Removing stitches
Brush	Lint cleaning

Regulatory Information

UL Listed: Certified for electrical safety in household use. FCC Part 15: Complies with interference limits. Copyright © 2024 Jones Brother Sewing Machines; all rights reserved. Patents pending. For technical support, visit www.jonesbrothersewing.com or contact 1-800-555-SEWING.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread machine; adjust tension; check for burrs on needle.
Skipped stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle type for fabric.
Uneven stitches	Tension issues	Adjust upper and bobbin tension; clean race hook.
Machine jams	Thread buildup	Remove bobbin case; clean lint and thread fragments.
No power	Power connection	Check power cord; ensure foot pedal connected properly.
Bobbin thread bunching	Incorrect bobbin insertion	Remove and reinsert bobbin following directional arrow.

Service: 1-800-555-SEWING; www.jonesbrothersewing.com