JL110 Sewing Machine Manual

The JL110 is a versatile household sewing machine featuring straight stitch, zigzag stitch, buttonhole function, adjustable stitch length and width, built-in LED light, free arm capability, automatic needle threader, top drop-in bobbin system, and adjustable presser foot pressure. Powered by 110V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Threading the Machine 7. Basic Sewing Operations 8. Stitch Selection 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main body with built-in LED light, Free arm, Stitch selection dial, Thread tension dial, Bobbin winder, Presser foot lever, Reverse stitch button.

Feature	Description
Stitch selection dial	Selects different stitch patterns
Thread tension dial	Adjusts upper thread tension (0-9)
Bobbin winder	Winds thread onto bobbin automatically
Presser foot lever	Raises and lowers presser foot
Reverse stitch button	Sews in reverse for reinforcement
Free arm	Removable accessory compartment for tubular sewing
LED light	Illuminates sewing area
Automatic needle threader	Assists with threading needle
Top drop-in bobbin	Easy bobbin loading and viewing
Stitch length dial	Adjusts stitch length (0-4mm)

Installation

Unpack and inspect contents. Place on stable surface.

Remove machine from packaging: Lift carefully from carrying case.
Attach power cord: Plug into machine and wall outlet.
Install foot pedal: Connect to machine port.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.
Attach presser foot: Lower presser foot lever, snap foot into place.

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Setup

Prepare machine for first use.

Wind bobbin: Place spool on pin, thread through bobbin winder, press pedal.
Insert bobbin: Open cover, drop bobbin in with thread clockwise.
Thread upper thread: Follow numbered guides from spool to needle.
Raise bobbin thread: Hold upper thread, turn handwheel toward you.
Test stitches: Use scrap fabric to adjust tension and stitch settings.

CAUTION! Ensure proper threading to prevent thread jams and needle breakage.

Specifications

Machine Type: Household sewing machine
Stitches: 10 built-in stitches including straight, zigzag, blind hem
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm for zigzag stitches
Buttonhole: 1-step automatic buttonhole
Needle System: HA-1, 130/705 H
Bobbin: Top drop-in, Class 15 transparent
Lighting: Built-in LED
Power Source: 110V AC, 60Hz
Speed: Up to 800 stitches per minute

Controls and Settings

Main controls located on front and top of machine.

Front Panel: Stitch selection dial, Stitch length dial, Stitch width dial, Reverse stitch button.

Top Features: Spool pins, Thread guides, Tension dial, Bobbin winder, Needle threader, Presser foot lever, Handwheel.

Stitch Selection: Turn dial to select pattern (straight, zigzag, stretch, decorative). Stitch Length: 0-4mm (0 for darning, 4 for basting). Stitch Width: 0-5mm (straight stitch=0, zigzag=1-5). Tension: 2-4 for normal sewing, adjust for different fabrics.

Threading the Machine

Proper threading ensures smooth operation.

Raise presser foot and needle to highest position.
Place spool on spool pin with thread unwinding counterclockwise.
Follow numbered guides: Right to left, down through tension discs.
Thread take-up lever from right to left.
Follow remaining guides to needle.
Use automatic needle threader: Lower lever, hook thread, return lever.
Pull both threads under presser foot toward back.

Tip: Always thread with presser foot raised to open tension discs.

Basic Sewing Operations

Step-by-step sewing instructions.

Prepare fabric: Place under presser foot, lower needle into fabric.
Lower presser foot: Gently press lever down.
Start sewing: Press foot pedal gradually.
Guide fabric: Keep hands on either side, let machine feed fabric.
Reverse stitching: Press reverse button at beginning and end of seams.
Stop sewing: Release foot pedal, raise needle, raise presser foot.
Remove fabric: Pull threads to back, cut with thread cutter.

WARNING! Never pull fabric while sewing - let feed dogs move fabric.

Stitch Selection

Available stitches and their applications.

Stitch	Symbol	Use	Length	Width
Straight	---	Basic seams, topstitching	2.0-2.5	0
Zigzag	~~~	Finishing edges, applique	1.5-2.0	2-4
Blind Hem	_~_	Nearly invisible hems	2.5-3.0	2-3
Stretch	^^^	Knits, elastic fabrics	2.0-2.5	2-3
Decorative	***	Embroidery, embellishment	2.0-3.0	3-5

Care & Maintenance

Regular maintenance ensures optimal performance.

Clean lint: Remove needle plate, brush out lint from bobbin area.
Oil machine: Apply 1-2 drops of sewing machine oil to moving parts monthly.
Change needle: Replace after 8-10 hours of sewing or if damaged.
Storage: Cover machine when not in use, store in dry place.

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. Copyright © 2025 JL Sewing Machines; all rights reserved. For technical support, visit www.jlsewing.com or contact 1-800-555-SEWING. Made for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread completely; reduce tension; check for burrs on needle.
Needle breaking	Bent needle/wrong size	Replace needle; ensure correct size for fabric; don't pull fabric.
Uneven stitches	Tension/timing issues	Adjust tension; clean machine; check bobbin installation.
Machine jams	Thread buildup	Remove needle plate; clean bobbin area; rethread upper and lower.
Fabric not feeding	Presser foot pressure	Adjust presser foot pressure; clean feed dogs; check foot installation.

Reset: Unplug for 5 minutes if electronic issues occur.

Service: 1-800-555-SEWING; www.jlsewing.com