jcpenney sewing machine 6935 manual

The JCPenney Sewing Machine Model 6935 is a versatile household sewing machine featuring multiple stitch patterns, built-in buttonholer, free arm capability, adjustable stitch length and width, reverse stitching, and built-in light. Designed for home sewing projects with easy-to-use controls and comprehensive accessories. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 8. Maintenance & Cleaning 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Free arm sewing surface, stitch pattern selector, built-in buttonholer, reverse stitch lever, tension control, built-in work light, foot pedal control.

Feature	Description
Stitch Patterns	Multiple built-in stitches including straight, zigzag, decorative
Buttonholer	Automatic one-step buttonhole function
Free Arm	Removable extension table for cylindrical sewing
Stitch Length Control	Adjustable from 0-4mm
Stitch Width Control	Adjustable zigzag width up to 5mm
Reverse Stitch	Built-in reverse stitching for seam reinforcement
Tension Control	Adjustable upper thread tension
Built-in Light	Illuminates work area
Foot Pedal	Variable speed control
Power Switch	Main power on/off control

Installation & Setup

Unpack and inspect all components. Place on stable, level surface.

Remove machine from packaging: Lift carefully from carrying case.
Install foot pedal: Connect to power cord and machine port.
Connect power: Plug into standard 120V AC outlet.
Attach accessories: Install presser foot, thread spool pin, and bobbin winder.
Install needle: Ensure flat side faces rear, tighten needle clamp screw.

WARNING! Keep fingers away from needle area during operation. Always disconnect power when threading or changing needles.

First-Time Operation

Power on machine; follow threading diagram.

Thread upper thread: Follow numbered guides from spool to needle.
Wind bobbin: Place empty bobbin on winder, thread through tension disc.
Insert bobbin: Drop bobbin into case with thread pulling counterclockwise.
Select stitch: Turn pattern dial to desired stitch setting.
Test sew: Use scrap fabric to check tension and stitch quality.

CAUTION! Always raise needle to highest position before changing settings or removing fabric.

Specifications

Model: JCPenney 6935
Stitch Patterns: Straight, zigzag, multiple decorative stitches
Stitch Length: 0-4mm adjustable
Stitch Width: Up to 5mm for zigzag
Buttonhole: Automatic one-step
Free Arm: Yes, removable extension table
Light: Built-in work light
Power: 120V AC, 60Hz
Speed Control: Foot pedal variable speed
Included Accessories: Various presser feet, bobbins, needles, seam ripper, brush

Controls and Settings

Main controls located on front and side of machine. Stitch Pattern Selector: Dial to choose stitch type. Stitch Length Dial: Adjust from 0-4mm. Stitch Width Dial: Control zigzag width. Reverse Stitch Lever: Hold for backward stitching. Tension Control: Adjust upper thread tension (4-6 normal setting).

Operation: Power switch, foot pedal speed control, presser foot lever, handwheel.

Stitch Settings: Straight stitch for seams, zigzag for finishing, decorative for embellishment. Tension: Lower for lighter fabrics, higher for heavier materials. Presser Feet: Standard foot for general sewing, zipper foot, buttonhole foot.

Stitch Selection

Multiple stitch patterns available via pattern selector dial.

Straight Stitch: Basic sewing, position 1 on dial.
Zigzag Stitch: Edge finishing, applique, position 2-3.
Decorative Stitches: Multiple pattern options, positions 4+.
Buttonhole: Automatic one-step, special setting.
Blind Hem: Special stitch for nearly invisible hems.
Elastic Stretch: For knit and stretch fabrics.

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin

Proper threading essential for quality stitching.

Upper Threading: Follow numbered guides from spool pin to needle.
Bobbin Winding: Place empty bobbin on winder, engage clutch, press pedal.
Bobbin Insertion: Remove bobbin case, insert bobbin with thread counterclockwise.
Thread Take-up: Raise presser foot, pull thread through tension discs.
Needle Threading: Thread eye from front to back.

WARNING! Always disconnect power when threading needle or bobbin area.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Brush lint from bobbin area and feed dogs.
Weekly: Oil moving parts with sewing machine oil (2-3 drops).
Monthly: Clean tension discs with soft cloth.
As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Accessories

Standard included accessories:

Standard Presser Foot
Zipper Foot
Buttonhole Foot
Darning/Embroidery Foot
Assorted Needles
Bobbins (4-6)
Seam Ripper
Brush
Screwdriver
Spool Pin Felt

Safety Information

FCC Compliance: Meets electrical safety standards. Always unplug when not in use. Keep away from water and moisture. Do not operate with damaged cord. Keep fingers away from moving parts. Store in dry location.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread completely; adjust tension; check for burrs on needle.
Skip stitches	Wrong needle/bent needle	Replace needle; ensure correct needle type for fabric.
Bobbin thread bunching	Incorrect bobbin threading	Remove and rethread bobbin; check bobbin case.
Machine not feeding	Feed dogs lowered	Raise feed dogs; clean feed dog area.
No power	Power connection	Check power cord; ensure outlet works; check foot pedal connection.
Uneven stitches	Tension issues	Adjust upper and bobbin tension; rethread both.

Service: For technical support, contact JCPenney customer service or authorized repair center.