jcpenney 7064 sewing machine manual

The JCPenney 7064 is a versatile sewing machine featuring multiple stitch patterns, adjustable stitch length and width, built-in buttonholer, free arm capability, reverse stitching, and variable speed control. This manual covers safety instructions, machine features, setup, operation, maintenance, and troubleshooting for optimal sewing performance.

Features at a Glance

Key components: Free arm design, built-in stitch patterns, drop-in bobbin system, built-in buttonholer, reverse stitch function, variable speed control.

Installation and Setup

Unpack and inspect all components. Place machine on stable surface.

1. Remove packaging materials and protective covers
2. Attach power cord to machine and plug into outlet
3. Install foot controller and connect to machine
4. Attach accessory box and thread spool pins
5. Install needle following proper orientation
6. Wind and insert bobbin according to instructions

WARNING! Keep fingers away from needle area during operation. Always turn off machine when threading or changing accessories.

First-Time Operation

Power on machine; follow setup procedures.

1. Thread upper thread following numbered guides
2. Insert bobbin with thread pulling counterclockwise
3. Select straight stitch pattern for initial testing
4. Adjust stitch length to medium setting (2.5-3.0)
5. Place fabric under presser foot and lower foot lever
6. Gently press foot controller to begin sewing
7. Practice basic stitches on scrap fabric first

CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.

Specifications

• Model: JCPenney 7064
• Stitch Patterns: 12 built-in stitches
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Buttonhole: One-step automatic
• Speed Control: Variable via foot controller
• Bobbin System: Drop-in, class 15
• Needle System: HA-1, 130/705H
• Power Supply: 120V AC, 60Hz
• Warranty: Limited 25-year warranty

Controls and Settings

Main controls: Stitch pattern selector, stitch length dial, stitch width dial, reverse stitch button, bobbin winder.

Operation: Power switch, foot controller, presser foot lever, hand wheel, spool pins.

Stitch Selection: Rotate pattern dial to desired stitch. Stitch Length: Adjust for shorter/longer stitches. Stitch Width: Adjust for zigzag and decorative stitches. Reverse: Hold button for backstitching. Tension: Adjust thread tension dial for balanced stitches.

Stitch Selection and Patterns

Available stitches: Straight, zigzag, multiple stretch, decorative stitches.

1. Straight Stitch: Basic sewing, topstitching (position 1)
2. Zigzag Stitch: Overcasting, appliqué (position 2)
3. Blind Hem: Nearly invisible hemming (position 3)
4. Stretch Stitch: For knit fabrics (position 4)
5. Decorative Stitches: Multiple pattern options (positions 5-12)
6. Buttonhole: Automatic one-step (special position)

Tip: Always test stitch on scrap fabric before sewing project.

Threading and Bobbin

Upper Threading:

1. Raise presser foot and raise needle to highest position
2. Place spool on spool pin
3. Follow numbered threading guides from front to back
4. Thread through tension discs
5. Thread through take-up lever
6. Thread through needle from front to back

Bobbin Winding:

1. Place empty bobbin on winder shaft
2. Thread through bobbin winding tension disc
3. Push bobbin winder to engage
4. Press foot controller to wind bobbin
5. Stop when bobbin is full

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

1. Unplug machine before cleaning
2. Remove needle plate and clean lint buildup
3. Clean bobbin area with small brush
4. Oil moving parts as specified in manual
5. Wipe exterior with soft, dry cloth
6. Store with needle in highest position

CAUTION! Never use compressed air to clean machine. Use only sewing machine oil for lubrication.

Regulatory Information

UL Listed: Complies with UL safety standards. FCC Part 15: Class B digital device. Copyright © JCPenney. For technical support, contact JCPenney Customer Service at 1-800-322-1181 or visit www.jcpenney.com.

Troubleshooting

Service: Authorized JCPenney service centers only. Do not attempt internal repairs.

Support: 1-800-322-1181; www.jcpenney.com