JC Penney Model 7057 Sewing Machine Manual

The JC Penney Model 7057 is a versatile sewing machine featuring multiple stitch patterns, adjustable stitch length and width, built-in buttonholer, free arm capability, reverse stitching, and variable speed control. This manual covers setup, operation, maintenance, and troubleshooting for optimal performance with various fabrics and sewing projects.

Features at a Glance

Key components: Free arm design, built-in stitch patterns, drop-in bobbin system, built-in light, accessory storage compartment.

Unpacking and Setup

Carefully unpack all components and inspect for damage.

1. Remove machine from packaging: Lift from carrying case using handles.
2. Attach power cord: Plug into machine and wall outlet (120V).
3. Install foot pedal: Connect to machine port and place on floor.
4. Thread machine: Follow threading diagram on machine.
5. Wind bobbin: Use built-in bobbin winder with matching thread.

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

Basic Operation

Power on machine; test stitches on scrap fabric first.

1. Select stitch: Turn pattern dial to desired stitch.
2. Adjust settings: Set stitch length and width as needed.
3. Position fabric: Lower presser foot and begin sewing.
4. Use reverse: Hold reverse button to reinforce stitches.
5. Change stitches: Stop machine before changing patterns.

CAUTION! Always use correct needle and thread for fabric type. Replace dull needles immediately.

Specifications

• Model: JC Penney 7057
• Stitches: 12 built-in patterns
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Buttonhole: One-step automatic
• Bobbin: Class 15 transparent
• Needle: Standard domestic 15x1
• Power: 120V, 60Hz
• Weight: 12.5 lbs
• Warranty: 25-year limited

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch pattern dial, stitch length dial, stitch width dial, reverse button, bobbin winder.

Stitch Selection: Turn pattern dial to select from straight, zigzag, stretch, blind hem, decorative stitches. Stitch Length: Controls stitch density (0-4mm). Stitch Width: Adjusts zigzag and decorative stitch width (0-5mm). Reverse: Reinforce seams by sewing backward. Bobbin Winder: Automatic bobbin winding with thread cutter.

Stitch Selection Guide

Recommended settings for common fabrics and projects.

1. Straight Stitch: General sewing, 2.5mm length
2. Zigzag Stitch: Seam finishing, stretch fabrics, 3mm width
3. Blind Hem: Invisible hemming, use blind hem foot
4. Decorative Stitches: Embroidery and decorative work
5. Buttonhole: Automatic one-step with buttonhole foot

Tip: Test stitches on fabric scrap before starting project.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Brush out lint from bobbin area and feed dogs
2. Weekly: Oil moving parts with sewing machine oil
3. Monthly: Clean tension discs and check belt tension
4. As needed: Replace needles and clean race hook

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Troubleshooting

Reset: Unplug for 5 minutes to reset electronic controls.

Warranty Information

25-year limited warranty on mechanical parts. 5-year warranty on electrical components. Proof of purchase required. For service, contact JC Penney Customer Service at 1-800-322-1189 or visit www.jcpenney.com.