The Janome Sewing Machine 802 is a versatile mechanical sewing machine designed for home use, featuring straight and zigzag stitches, built-in buttonhole function, free arm capability, stitch length and width adjustments, reverse sewing, drop feed for darning and free-motion sewing, built-in light, and easy threading system. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.
Key components: Mechanical sewing machine with built-in stitches, free arm, stitch selection dial, tension control, bobbin system, and accessory storage.
| Feature | Description |
|---|---|
| Stitch Selection Dial | Selects between straight stitch, zigzag, and decorative stitches |
| Stitch Length Control | Adjusts stitch length from 0-4mm |
| Stitch Width Control | Adjusts zigzag width from 0-5mm |
| Reverse Sewing Lever | Reinforces stitches at beginning and end of seams |
| Drop Feed Lever | Lowers feed dogs for darning and free-motion sewing |
| Built-in Buttonhole | Creates perfect buttonholes in one easy step |
| Free Arm | Removable extension table for sewing cuffs and sleeves |
| Built-in Light | Illuminates sewing area |
| Bobbin Winder | Automatic bobbin winding system |
| Thread Tension Dial | Adjusts upper thread tension |
Unpack and inspect contents. Place on stable sewing table or desk.
WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable surface placement.
Power on machine; follow setup procedures.
CAUTION! Keep fingers away from moving needle. Always turn power off when threading.
Main controls located on machine body: Stitch selection dial, stitch length control, stitch width control, reverse lever, bobbin winder.
Stitch Selection: Turn dial to select straight stitch, zigzag, stretch stitches, or buttonhole setting. Stitch Length: Adjust from 0 (for darning) to 4mm (long basting stitches). Stitch Width: Adjust zigzag width from 0 (straight stitch) to 5mm (wide zigzag). Reverse Sewing: Press and hold reverse lever to reinforce stitches. Thread Tension: Adjust dial for balanced stitches (usually 4-5 for normal sewing).
Available stitches and their applications:
Tip: Always test stitch on fabric scrap before beginning project.
Proper threading ensures smooth operation.
WARNING! Always raise needle to highest position before threading. Turn power off during threading.
Regular maintenance ensures optimal performance.
CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.
CE certified for electrical safety standards. Complies with international sewing machine safety requirements. Copyright © Janome Corporation. All rights reserved. For support, visit www.janome.com or contact authorized Janome service centers. Serial number located on machine body for service identification.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Thread breaking | Incorrect threading/tension | Re-thread completely; adjust tension; check for burrs on needle |
| Skipped stitches | Wrong needle/thread combination | Change needle; use correct needle for fabric type; check threading |
| Uneven stitches | Tension imbalance | Adjust upper tension; reinsert bobbin; clean tension discs |
| Machine not feeding | Feed dogs lowered/dirty | Raise feed dogs; clean feed dog area; check stitch length setting |
| Noise/vibration | Lint buildup/needs oiling | Clean and oil machine; check for loose parts |
| Needle breaking | Bent needle/wrong installation | Replace needle; ensure needle is inserted correctly; check for fabric pulling |
Reset: Turn power off and restart if electronic issues occur.
Service: Contact authorized Janome service center for professional repairs.