Janome Memory Craft 8000 Sewing Machine Manual

The Janome Memory Craft 8000 is a computerized sewing machine with advanced features including 200 built-in stitches, automatic needle threader, built-in memory for stitch patterns, adjustable sewing speed, automatic buttonhole, drop feed for free-motion sewing, LCD display, knee lifter, and automatic thread cutter. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Stitch Selection and Memory 8. Special Functions 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Computerized control panel, LCD display, automatic needle threader, built-in memory, knee lifter, drop feed mechanism, accessory compartment.

Feature	Description
Built-in Stitches	200 decorative, utility, and stretch stitches
Automatic Needle Threader	Easy threading with push-button operation
LCD Display	Shows stitch selection, settings, and memory functions
Memory Function	Stores custom stitch combinations and patterns
Automatic Buttonhole	One-step automatic buttonhole with sensor
Knee Lifter	Raises presser foot hands-free for pivoting
Drop Feed	Lower feed dogs for free-motion sewing
Speed Control	Adjustable sewing speed from slow to fast
Automatic Thread Cutter	Built-in thread cutter at end of seam
Needle Up/Down	Programmable needle position

Installation

Unpack and inspect contents. Place on stable sewing table.

Remove packaging materials and protective covers.
Place machine on flat, stable surface at comfortable height.
Connect foot control pedal to machine.
Plug power cord into electrical outlet.
Install needle and thread machine following threading diagram.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable surface placement.

First-Time Setup

Power on machine; follow initial setup procedure.

Thread machine: Follow threading path indicated on machine.
Install bobbin: Wind bobbin and insert into bobbin case.
Select basic stitch: Use stitch selection dial for straight stitch.
Test sew: Use scrap fabric to test tension and stitch quality.
Adjust settings: Set stitch length, width, and tension as needed.

CAUTION! Keep fingers away from needle area during operation.

Specifications

Stitches: 200 built-in stitches including utility, decorative, and stretch
Stitch Width: Up to 7mm maximum
Stitch Length: Up to 5mm maximum
Speed: Up to 850 stitches per minute
Needle System: HA-1, 130/705 H
Bobbin: Class 15 (transparent)
Presser Feet: Multiple included for various functions
Display: LCD with stitch and function indicators
Power Source: 120V AC, 60Hz
Dimensions: Standard sewing machine size with extension table

Controls and Settings

Access functions via control panel and LCD display. Front Panel: Power switch, stitch selection buttons, memory buttons, reverse stitch, needle up/down.

Control Panel: Stitch selection dial, LCD display, memory buttons, automatic functions, speed control slider.

Stitch Settings: Length (0-5mm), Width (0-7mm), tension adjustment. Memory Functions: Store custom stitch combinations, recall patterns. Automatic Functions: Needle threader, thread cutter, buttonhole, mirror imaging.

Connecting Accessories

Accessory compartment stores additional presser feet and tools.

Turn off machine before changing accessories.
Install presser feet: Lower presser foot lever, snap foot into place.
Connect extension table: Slide into position on free arm.
Use knee lifter: Attach to designated slot for hands-free operation.

Tip: Always use correct presser foot for specific stitch type.

Stitch Selection and Memory

Supports 200 built-in stitches with memory function.

Select stitch: Turn stitch selection dial or use direct selection buttons.
Adjust settings: Use length and width controls for customization.
Memory function: Press MEMORY button to store stitch combinations.
Recall memory: Access stored patterns from memory banks.
Mirror imaging: Create symmetrical patterns with mirror function.
Automatic patterns: Use built-in decorative and utility stitches.
Buttonhole memory: Store custom buttonhole sizes and styles.

WARNING! Always test stitches on scrap fabric before sewing project.

Special Functions

Automatic Needle Threader: Engage with lever for easy threading. Drop Feed: Lower feed dogs for free-motion quilting and embroidery. Knee Lifter: Raise presser foot without using hands for pivoting.

Care & Maintenance

Unplug before cleaning. Regular oiling and lint removal required.

CAUTION! Use only recommended sewing machine oil. Clean lint buildup regularly to prevent damage.

Regulatory Information

UL Listed: Complies with safety standards for household use. Copyright © 2025 Janome; trademarks of Janome America, Inc. For support, visit www.janome.com or contact 1-800-631-0183. Made for household use with standard electrical requirements.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not running	Power connection/foot control	Check power cord; ensure foot control is plugged in properly.
Thread breaking	Tension/thread quality	Adjust tension; use quality thread; check for burrs on needle.
Uneven stitches	Threading/tension	Re-thread machine; adjust upper and lower tension.
Needle breaking	Needle installation/fabric	Ensure needle is inserted correctly; use appropriate needle for fabric.
Memory not saving	Power interruption	Save patterns properly; ensure stable power supply during operation.

Reset: Turn machine off and on to reset computerized functions.

Service: 1-800-631-0183; www.janome.com for authorized service centers