Janome 7025 Sewing Machine Manual

The Janome 7025 is a versatile computerized sewing machine featuring 25 built-in stitches, one-step buttonhole, automatic needle threader, drop-in bobbin system, adjustable stitch length and width, free arm capability, LED lighting, and multiple presser feet. Designed for home sewing enthusiasts, it offers easy operation with digital controls and comprehensive functionality for various sewing projects. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Computerized control panel, automatic needle threader, drop-in bobbin system, free arm, LED work light, multiple presser feet, and built-in stitches.

Installation & Setup

Unpack and inspect all components. Place on stable, level surface.

1. Remove packaging materials and protective covers from machine.
2. Attach power cord to machine and plug into grounded outlet.
3. Install foot controller and connect to machine.
4. Raise presser foot and insert needle securely.
5. Wind bobbin and insert into bobbin case.
6. Thread machine following numbered guide on machine.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; familiarize yourself with basic controls.

1. Select straight stitch using stitch selection dial.
2. Place fabric under presser foot and lower foot lever.
3. Gently press foot controller to begin sewing.
4. Practice basic stitching on scrap fabric.
5. Experiment with stitch length and width adjustments.
6. Test reverse stitching for seam reinforcement.

CAUTION! Always start with needle in highest position. Keep work area clean and well-lit.

Specifications

• Stitches: 25 built-in stitches
• Buttonholes: One-step automatic
• Needle Positions: Multiple positions available
• Stitch Length: Adjustable up to 5mm
• Stitch Width: Adjustable up to 7mm
• Bobbin: Top-loading drop-in system
• Lighting: LED work light
• Free Arm: Yes, with removable extension table
• Power Supply: 110V, 60Hz
• Weight: Approximately 15 lbs

Controls and Settings

Main control panel includes stitch selection dial, stitch length/width controls, reverse stitch button, and power switch.

Stitch Selection: Rotate dial to choose desired stitch pattern. Stitch Length: Adjust from 0-5mm for stitch density. Stitch Width: Adjust from 0-7mm for zigzag and decorative stitches. Reverse Stitch: Hold button to sew backwards for reinforcement. Speed Control: Use slider or foot controller pressure to regulate sewing speed.

Stitch Selection

The Janome 7025 offers 25 versatile stitches for various sewing applications.

1. Straight Stitch: Basic sewing (positions 1-3)
2. Zigzag Stitch: Overcasting and decorative work
3. Blind Hem Stitch: Nearly invisible hems
4. Stretch Stitches: For knit fabrics
5. Decorative Stitches: Ornamental patterns
6. Buttonhole Stitch: Automatic one-step buttonholes

Tip: Always test stitches on scrap fabric before sewing your project.

Basic Sewing Operations

Follow these steps for successful sewing projects.

1. Select appropriate stitch for your fabric and project.
2. Thread machine properly following guide numbers.
3. Insert bobbin with thread unwinding counterclockwise.
4. Place fabric under presser foot and lower foot.
5. Hold thread tails and begin sewing slowly.
6. Guide fabric gently without pulling or pushing.
7. Use reverse stitch at beginning and end of seams.
8. Raise presser foot to remove fabric and trim threads.

WARNING! Never sew over pins. Remove pins before they reach the needle.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Brush out lint from bobbin area and feed dogs. Weekly: Oil moving parts as instructed in manual. Monthly: Clean entire machine and check for wear. Always unplug machine before cleaning or maintenance.

CAUTION! Use only Janome recommended needles and accessories. Do not use compressed air for cleaning.

Accessories

Standard accessories included with Janome 7025:

• All-purpose foot
• Zipper foot
• Buttonhole foot
• Blind hem foot
• Bobbin (extra)
• Needles
• Seam ripper/Lint brush
• Screwdriver
• Instruction manual

Safety Information

Important safety precautions for sewing machine operation:

• Always disconnect power when changing needles or cleaning
• Keep fingers away from moving needle
• Do not operate with damaged cord or plug
• Use machine in well-lit area
• Keep hair and loose clothing away from moving parts
• Supervise children and inexperienced users

Troubleshooting

Service: Contact authorized Janome service center for repairs. Visit www.janome.com or call 1-800-631-0183 for support.