Janome 6600 Sewing Machine Manual

The Janome 6600 is a professional-grade computerized sewing machine featuring 60 built-in stitches, automatic needle threader, knee lifter, advanced feed system, memory function, and programmable needle up/down. With a maximum sewing speed of 1,000 stitches per minute, this machine offers precision stitching for various fabrics and projects. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD display, automatic needle threader, knee lifter, built-in needle plate, feed dog system, bobbin winding mechanism, stitch selection dial.

Installation & Setup

Unpack and inspect all components. Place on stable sewing table.

1. Remove packaging materials and protective covers from machine.
2. Attach power cord to machine and plug into grounded outlet.
3. Install foot controller and connect to machine.
4. Wind bobbin and insert into bobbin case following threading diagram.
5. Thread upper thread using automatic needle threader.

WARNING! Machine is heavy; lift with care. Ensure stable surface to prevent tipping.

First-Time Operation

Power on machine; familiarize with basic controls.

1. Select straight stitch using stitch selection dial.
2. Place fabric under presser foot and lower foot using lever or knee lifter.
3. Press foot controller gently to begin sewing.
4. Practice basic stitches on scrap fabric.
5. Experiment with stitch length and width adjustments.

CAUTION! Keep fingers away from moving needle. Always use proper lighting.

Specifications

• Stitches: 60 built-in stitches including utility, decorative, and stretch
• Sewing Speed: Up to 1,000 stitches per minute
• Needle Positions: Adjustable left/right needle position
• Stitch Length: 0-5mm adjustable
• Stitch Width: 0-7mm for zigzag and decorative stitches
• Bobbin: Top-loading, class 15 transparent bobbin
• Presser Feet: 7 included feet with snap-on system
• Power Supply: 110V, 60Hz (US model)
• Dimensions: 16.5" x 7.9" x 12.2" (WxDxH)
• Weight: 22.5 lbs

Controls and Settings

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, LCD display, reverse stitch button.

Control Panel: Stitch selection buttons, memory function, needle up/down, automatic thread cutter, stitch width/length adjustment.

Basic Settings: Stitch selection (dial), stitch length (1.5-4mm default), stitch width (0-7mm), tension adjustment (2-6 normal range). Advanced: Memory function stores combinations, mirror imaging, speed control slider, automatic thread cutter.

Stitch Selection

60 built-in stitches organized by function.

1. Utility Stitches: Straight, zigzag, stretch, blind hem, overcast
2. Decorative Stitches: Scallops, waves, leaves, flowers, geometric patterns
3. Buttonholes: 6 types including standard, stretch, and keyhole
4. Stretch Stitches: For knit fabrics and elastic materials

Tip: Always test stitch on scrap fabric before sewing project.

Advanced Functions

Memory Function: Store up to 30 stitch combinations for quick recall.

1. Select desired stitch, length, and width settings.
2. Press MEMORY button to store current settings.
3. Recall stored settings by pressing corresponding memory number.
4. Mirror Imaging: Create symmetrical decorative patterns.
5. Automatic Thread Cutter: Cuts both top and bobbin threads with button press.
6. Programmable Needle Position: Set needle to stop up or down when releasing foot control.
7. Knee Lifter: Raise presser foot hands-free for pivoting fabric.

WARNING! Always turn off machine when changing needles or presser feet.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Oil machine following lubrication points in manual.
3. Monthly: Clean race hook and check for burrs or damage.
4. As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Unplug machine before cleaning or maintenance. Use only Janome recommended oil.

Accessories

Included with Janome 6600:

• Standard Foot (A)
• Zigzag Foot (B)
• Automatic Buttonhole Foot (D)
• Zipper Foot (E)
• Blind Hem Foot (G)
• Overedge Foot (M)
• Satin Stitch Foot (F)
• Additional needles (various sizes)
• Bobbin (class 15, extra)
• Screwdriver
• Seam ripper/Lint brush
• Knee lifter

Warranty Information

Janome 6600 comes with 25-year limited warranty. Warranty covers defects in materials and workmanship. Normal wear, needles, belts, light bulbs, and external covers excluded. For warranty service, contact authorized Janome dealer with proof of purchase. For support, visit www.janome.com or contact 1-800-631-0183.

Troubleshooting

Reset: Turn machine off and on to reset computer functions.

Service: 1-800-631-0183; www.janome.com for authorized service centers