Instructions Manual for Singer Sewing Machine 5532

The Singer Sewing Machine 5532 is a versatile mechanical sewing machine with built-in stitches, automatic needle threader, adjustable stitch length and width, free arm capability, built-in buttonholer, top drop-in bobbin system, and multiple presser feet. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 8. Maintenance & Cleaning 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Mechanical sewing machine with built-in stitches, automatic needle threader, free arm, built-in buttonholer, top drop-in bobbin system.

FeatureDescription
Built-in Stitches32 built-in stitches including utility, decorative, and stretch
Automatic Needle ThreaderEasy needle threading with built-in mechanism
Free ArmConverts to free arm for sewing cuffs and sleeves
Built-in ButtonholerOne-step automatic buttonhole
Top Drop-in BobbinEasy bobbin loading with clear cover
Stitch Length ControlAdjustable stitch length from 0-4mm
Stitch Width ControlAdjustable stitch width up to 5mm
Reverse StitchBuilt-in reverse stitching for seam reinforcement
Power SwitchOn/off power control
Foot PedalVariable speed control

Installation & Setup

Unpack and inspect contents. Place on stable surface.

  1. Remove packaging materials and protective covers
  2. Place machine on sturdy table or sewing cabinet
  3. Connect foot pedal to machine
  4. Plug power cord into AC outlet
  5. Install needle following arrow direction
  6. Wind and install bobbin
  7. Thread upper thread through automatic needle threader

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Operation

Power on machine; follow setup procedures.

  1. Select straight stitch: Turn stitch selector to position 1
  2. Set stitch length: Adjust to medium setting (2.5)
  3. Set stitch width: Adjust to 0 for straight stitch
  4. Practice on scrap fabric first
  5. Use reverse stitch at beginning and end of seams
  6. Adjust thread tension if needed
  7. Clean lint area after first use

CAUTION! Always use proper needle for fabric type. Replace bent or dull needles immediately.

Specifications

Controls and Settings

Main controls: Stitch selector, stitch length dial, stitch width dial, reverse stitch button.

Stitch Selection: Turn dial to select desired stitch pattern (1-32). Stitch Length: Adjust from 0 (basting) to 4 (long stitches). Stitch Width: Adjust zigzag and decorative stitch width. Reverse: Hold button for reverse stitching. Tension: Adjust upper thread tension dial (2-6 normal range).

Stitch Selection

32 built-in stitches for various sewing applications.

  1. Straight Stitch: Positions 1-3 for basic sewing
  2. Zigzag Stitch: Positions 4-6 for finishing edges
  3. Blind Hem: Position 7 for invisible hems
  4. Stretch Stitches: Positions 8-12 for knit fabrics
  5. Decorative Stitches: Positions 13-32 for embellishment
  6. Buttonhole: Special position for automatic buttonholes

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin

Proper threading ensures smooth operation.

  1. Raise presser foot and needle to highest position
  2. Place spool on spool pin
  3. Follow threading guide numbers 1-6
  4. Use automatic needle threader for easy threading
  5. Wind bobbin with matching thread
  6. Insert bobbin with thread running counterclockwise
  7. Pull bobbin thread up through needle plate

WARNING! Ensure machine is turned off during threading. Keep fingers clear of moving parts.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Unplug machine before cleaning
  2. Remove needle plate and clean lint with brush
  3. Oil moving parts as specified in manual
  4. Clean bobbin area after each project
  5. Replace needle regularly (every 8-10 hours of sewing)
  6. Cover machine when not in use

CAUTION! Use only sewing machine oil. Do not use household oils.

Accessories

Standard accessories included with Singer 5532.

AccessoryPurpose
All-purpose FootGeneral sewing
Zipper FootInstalling zippers
Buttonhole FootMaking buttonholes
Button Sewing FootSewing on buttons
Seam RipperRemoving stitches
NeedlesAssorted sizes
BobbinsExtra bobbins
ScrewdriverNeedle plate removal
BrushLint cleaning

Regulatory Information

UL Listed: Certified for safety standards. Copyright © 2024 Singer; trademarks of Singer Licensing Company. For support, visit www.singer.com or contact 1-800-4-SINGER. Made for household use. Dispose of properly according to local regulations.

Troubleshooting

SymptomPossible CauseCorrective Action
Thread breakingIncorrect threading/tensionRe-thread machine; adjust tension; check for burrs on needle.
Needle breakingBent needle/wrong sizeReplace needle; ensure correct size for fabric; don't pull fabric.
Uneven stitchesTension issuesAdjust upper and bobbin tension; re-thread completely.
Machine not feedingPresser foot pressureCheck presser foot is down; clean feed dogs; check stitch length.
Bobbin issuesIncorrect winding/insertionRewind bobbin evenly; ensure inserted correctly; clean bobbin case.
No powerPower connectionCheck power cord plugged in; foot pedal connected; power switch on.

Service: 1-800-4-SINGER; www.singer.com

Instructions Manual for Singer Sewing Machine 5532 © - All Rights Reserved 2025