Instruction Manual Singer Advance Sewing Machine

The Singer Advance Sewing Machine is a versatile electronic sewing machine with advanced features including multiple stitch patterns, automatic needle threader, adjustable stitch length and width, built-in LED lighting, drop-in bobbin system, free arm capability, and computerized controls. Suitable for beginners and experienced sewers alike. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, automatic needle threader, drop-in bobbin system, built-in LED light, free arm, accessory storage, foot pedal, power adapter.

Installation & Setup

Unpack and inspect all components. Place on stable, flat surface.

1. Remove protective packaging and foam inserts.
2. Attach foot pedal: Connect to machine port at front right.
3. Connect power adapter: Plug into machine and wall outlet.
4. Install needle: Loosen needle clamp screw, insert needle with flat side facing back.
5. Wind bobbin: Follow bobbin winding instructions in section 7.
6. Thread machine: Follow automatic threading guide.

WARNING! Keep fingers away from needle area during setup and operation. Ensure machine is unplugged during initial setup.

First-Time Operation

Power on machine; follow initial setup procedure.

1. Select basic straight stitch: Use stitch selection dial.
2. Test on scrap fabric: Use medium weight cotton fabric.
3. Adjust tension: Start with default setting (4), adjust if needed.
4. Practice speed control: Use foot pedal pressure control.
5. Test reverse stitching: Use reverse button to reinforce seams.

CAUTION! Always start with needle in highest position. Keep hands clear of moving parts.

Specifications

• Stitch Patterns: 60 built-in stitches including utility, decorative, and stretch
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Needle Positions: Left, center, right
• Maximum Speed: 750 stitches per minute
• Bobbin Type: Class 15 transparent bobbin
• Needle System: HAx1 standard domestic needles
• Power Requirements: 110-120V, 60Hz
• Machine Weight: 12.5 lbs (5.7 kg)
• Warranty: 25-year limited warranty

Controls and Settings

Control Panel: Power switch, stitch selection dial, stitch length dial, stitch width dial, reverse stitch button, automatic needle threader.

LCD Display: Shows selected stitch number, recommended foot, stitch length/width settings.

Stitch Selection: Turn dial to choose from 60 built-in stitches. Stitch Length: Adjust from 0-4mm (0 for darning). Stitch Width: Adjust from 0-5mm for zigzag and decorative stitches. Tension Control: Default setting 4, adjust for different fabrics. Speed Control: Use foot pedal pressure or speed control slider.

Stitch Selection Guide

Utility Stitches: Straight stitch (1-3), zigzag (4), stretch stitches (10-15). Decorative Stitches: Scallop, honeycomb, feather (20-35). Buttonhole: 4-step automatic buttonhole (36-39).

1. Select stitch using dial.
2. Check LCD for recommended presser foot.
3. Adjust stitch length and width as needed.
4. Test on scrap fabric before sewing project.

Tip: Refer to stitch guide chart in accessory box for detailed stitch applications.

Threading & Bobbin

Upper Threading:

1. Raise presser foot and needle to highest position.
2. Place spool on spool pin.
3. Follow threading path marked on machine.
4. Use automatic needle threader: Push down lever, hook thread through needle eye.

Bobbin Winding:

1. Place empty bobbin on winder spindle.
2. Thread through bobbin winding tension disk.
3. Push bobbin winder to engage.
4. Press foot pedal to wind bobbin.
5. Stop when bobbin is 3/4 full.

WARNING! Always use same thread in bobbin and needle for balanced stitches.

Maintenance & Cleaning

Unplug machine before cleaning. Regular maintenance ensures optimal performance.

1. Remove lint: Use small brush to clean bobbin area and feed dogs.
2. Oil machine: Apply 1-2 drops of sewing machine oil to hook race monthly.
3. Clean exterior: Use soft, dry cloth only.
4. Needle replacement: Change needle after every 8 hours of sewing.

CAUTION! Never use compressed air; it can force lint deeper into mechanism.

Accessories

Included accessories: All-purpose foot, zipper foot, buttonhole foot, button sewing foot, seam ripper, needle set, bobbins (4), spool caps, lint brush, screwdriver.

Safety Information

FCC Part 15: Class B digital device; complies with residential interference limits. UL Listed for electrical safety. Always disconnect power when changing needles, cleaning, or not in use. Keep machine away from water and moisture. Do not operate with damaged cord or plug.

Important: This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities.

Troubleshooting

Service: 1-800-4-SINGER; www.singer.com

Reset: Turn machine off and unplug for 30 seconds to reset electronics.