Instruction Manual for Singer Sewing Machine Model 7469

The Singer Sewing Machine Model 7469 is a versatile electronic sewing machine featuring multiple stitch patterns, automatic needle threading, built-in buttonholer, adjustable stitch length and width, free arm capability, drop feed for darning and quilting, built-in LED light, and easy bobbin winding system. Powered by 120V AC, this machine is designed for both beginners and experienced sewers. Below are key sections for safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 8. Maintenance & Cleaning 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Electronic stitch selection panel, automatic needle threader, built-in LED work light, free arm, drop feed dog lever, bobbin winder, foot pedal control.

Feature	Description
Stitch Selection	Electronic panel with 60 built-in stitches
Automatic Needle Threader	Easy one-step needle threading
Built-in Buttonholer	One-step automatic buttonholes
Free Arm	For sewing cuffs and sleeves
Drop Feed Dogs	For darning and free-motion quilting
LED Work Light	Bright illumination of sewing area
Stitch Length/Width	Adjustable for custom sewing
Bobbin System	Top drop-in bobbin with clear cover
Power/Speed Control	Foot pedal with variable speed
Reverse Stitch	Button for reinforcing stitches

Installation & Setup

Unpack and inspect all components. Place on stable, flat surface.

Remove machine from packaging: Lift carefully from carrying case.
Install foot pedal: Connect to power port on right side of machine.
Connect power: Plug power cord into machine and wall outlet.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.
Wind bobbin: Follow bobbin winding instructions in section 7.

WARNING! Keep fingers away from needle area during setup and operation.

First-Time Operation

Power on machine; LED light will illuminate.

Thread machine: Follow threading path indicated on machine.
Insert bobbin: Place bobbin in bobbin case with thread pulling counterclockwise.
Select stitch: Choose desired stitch pattern using selection dial.
Test sew: Use scrap fabric to test stitch settings.
Adjust tension: Start with setting 4 and adjust as needed.

CAUTION! Always turn off machine when threading or changing needles.

Specifications

Model: Singer 7469
Stitches: 60 built-in stitches including utility, decorative, and stretch
Buttonholes: 6 one-step automatic styles
Stitch Length: Adjustable up to 4mm
Stitch Width: Adjustable up to 5mm
Speed: Up to 750 stitches per minute
Needle System: HAx1 standard needles
Bobbin: Class 15 transparent bobbin
Power: 120V AC, 60Hz
Weight: 12.5 lbs (5.7 kg)

Controls and Settings

Main control panel includes stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

Stitch Selection: Turn dial to choose from 60 built-in stitches. Stitch Length: Adjust from 0-4mm for shorter/longer stitches. Stitch Width: Adjust from 0-5mm for zigzag and decorative stitches. Reverse: Hold button to sew in reverse for reinforcement. Tension Dial: Adjust thread tension (4 is normal setting).

Stitch Selection

Machine offers 60 built-in stitches categorized as:

Utility Stitches: Straight stitch, zigzag, stretch stitches
Decorative Stitches: Scallops, waves, honeycombs
Buttonhole Stitches: 6 one-step automatic styles
Blind Hem Stitch: For invisible hemming
Overcast Stitch: For finishing fabric edges

Tip: Always test stitch on scrap fabric before sewing your project.

Threading & Bobbin

Proper threading is essential for good stitch quality.

Upper Threading: Follow numbered path on machine; use automatic needle threader.
Bobbin Winding: Place thread on spool pin, guide through tension disc, wind bobbin.
Bobbin Insertion: Drop bobbin into case with thread pulling counterclockwise.
Thread Drawing: Hold upper thread, turn hand wheel to bring up bobbin thread.

WARNING! Ensure presser foot is raised when threading upper thread.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean lint from bobbin area after each project
Oil machine every 3 months or after extensive use
Change needles regularly (every 8-10 hours of sewing)
Cover machine when not in use to prevent dust accumulation

CAUTION! Unplug machine before cleaning or maintenance.

Accessories

Included accessories: All-purpose foot, zipper foot, buttonhole foot, button sewing foot, darning/embroidery foot, seam ripper, needles, bobbins, screwdriver, lint brush, auxiliary spool pin.

Accessory	Use
All-purpose foot	General sewing
Zipper foot	Installing zippers
Buttonhole foot	Creating buttonholes
Darning foot	Free-motion sewing

Safety Information

Always disconnect power when changing needles, cleaning, or not in use. Keep fingers away from moving parts. Do not operate with damaged cord. Use only Singer recommended accessories. Keep machine away from water and heat sources.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Re-thread machine; adjust tension; check for burrs on needle
Skip stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle type for fabric
Bobbin thread bunching	Incorrect bobbin insertion	Remove and reinsert bobbin; check threading
Machine not running	Power/pedal issues	Check power connection; ensure pedal is plugged in
Uneven stitches	Tension issues	Adjust upper and bobbin tension; clean race area

Service: For technical support, contact Singer Customer Service at 1-800-4-SINGER or visit www.singer.com