Instruction Manual for Singer Sewing Machine Model 2662

The Singer Sewing Machine Model 2662 is a versatile mechanical sewing machine featuring 60 built-in stitches, automatic needle threader, adjustable stitch length and width, built-in buttonhole stitch, free arm capability, built-in LED light, drop feed for free-motion sewing, and reverse sewing function. Powered by 120V AC, this machine is ideal for beginners and experienced sewers alike with its easy-to-use dial controls and comprehensive accessory kit. Below are key sections for safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection Guide 7. Threading Instructions 8. Maintenance & Cleaning 9. Accessories Included 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Mechanical sewing machine with 60 built-in stitches, automatic needle threader, free arm, built-in LED light, and comprehensive stitch selection dial.

FeatureDescription
Built-in Stitches60 stitches including utility, decorative, and stretch stitches
Automatic Needle ThreaderEasy threading with push-button mechanism
Stitch Length ControlAdjustable from 0-4mm
Stitch Width ControlAdjustable up to 5mm for zigzag stitches
Free ArmFor sewing cuffs, sleeves, and other tubular items
Built-in LED LightIlluminates sewing area
Reverse Sewing LeverFor reinforcing stitches
Drop FeedFor free-motion sewing and darning
Buttonhole Stitch4-step built-in buttonhole
Power Source120V AC with foot pedal control

Installation & Setup

Unpack and inspect all contents. Place on stable, flat surface.

  1. Remove machine from packaging: Lift machine by base, not handwheel.
  2. Install foot pedal: Connect to power cord port on right side of machine.
  3. Plug into AC power: Use 120V outlet only.
  4. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
  5. Wind bobbin: Follow bobbin winding instructions in threading section.

WARNING! Machine is heavy; lift with care using both hands. Keep fingers away from needle area during operation.

First-Time Operation

Power on machine; LED light will illuminate.

  1. Thread machine: Follow threading path marked on machine.
  2. Insert bobbin: Place bobbin in bobbin case with thread unwinding counterclockwise.
  3. Select stitch: Turn stitch selection dial to desired stitch number.
  4. Test sew: Use scrap fabric to test stitch quality and tension.
  5. Adjust tension: Use tension dial if stitches are too loose or tight.

CAUTION! Always turn handwheel toward you; never force machine if it jams.

Specifications

Controls and Settings

Main controls located on front and right side of machine.

Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse lever, bobbin winder, tension control dial.

Stitch Selection: Turn dial to select from 60 built-in stitches (1-60). Stitch Length: Adjust for shorter/longer stitches (0-4mm). Stitch Width: Adjust zigzag and decorative stitch width (0-5mm). Tension Control: Adjust thread tension (0-9). Reverse Lever: Hold down for backstitching. Bobbin Winder: For winding bobbin without threading needle.

Stitch Selection Guide

Stitch chart located on machine bed for quick reference.

  1. Basic Stitches (1-10): Straight stitch, zigzag, stretch stitches
  2. Decorative Stitches (11-40): Scallop, honeycomb, feather stitches
  3. Buttonhole Stitch (41): 4-step buttonhole
  4. Blind Hem Stitch (42): For invisible hemming
  5. Elastic Stitches (43-50): For knit fabrics
  6. Quilting Stitches (51-60): Decorative quilting patterns

Tip: Always test new stitches on scrap fabric before sewing project.

Threading Instructions

Proper threading is essential for optimal performance.

  1. Raise presser foot and needle to highest position.
  2. Place spool on spool pin; follow numbered threading path.
  3. Use automatic needle threader: Push lever down, hook thread through eye, release.
  4. Wind bobbin: Place empty bobbin on winder, guide thread through tension disk, push winder to right.
  5. Insert bobbin: Remove bobbin case, insert bobbin with thread unwinding counterclockwise.

WARNING! Ensure machine is unplugged when threading bobbin area.

Maintenance & Cleaning

Regular maintenance ensures long machine life.

  1. Clean lint: Use brush to remove lint from bobbin area and feed dogs.
  2. Oil machine: Apply sewing machine oil to moving parts as indicated in manual.
  3. Change needle: Replace needle after every 8 hours of sewing or if damaged.
  4. Store properly: Cover machine when not in use; store in dry area.

CAUTION! Unplug machine before cleaning or maintenance. Use only Singer recommended oil.

Accessories Included

Safety Information

Always follow safety guidelines to prevent injury.

Troubleshooting

SymptomPossible CauseCorrective Action
Thread breakingIncorrect threading/tensionRe-thread machine; reduce tension; check for burrs on needle
Needle breakingWrong needle size/bent needleReplace needle; ensure needle is inserted correctly
Uneven stitchesTension issues/thread qualityAdjust tension; use quality thread; clean machine
Machine not runningPower connection/foot pedalCheck power cord; ensure foot pedal is connected properly
Fabric not feedingFeed dogs lowered/thread jamRaise feed dogs; clean feed dog area; check for thread jam

Service: 1-800-4-SINGER; www.singer.com

Instruction Manual for Singer Sewing Machine Model 2662 © - All Rights Reserved 2025