instruction manual for singer sewing machine model 2662 serial 13228944

The Singer Sewing Machine Model 2662 is a versatile household sewing machine designed for various fabric types and sewing techniques. This mechanical machine features multiple stitch patterns, adjustable stitch length and width, built-in buttonholer, free arm capability, drop feed for darning and quilting, and includes essential accessories. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Threading and Bobbin 7. Basic Sewing Operations 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Mechanical sewing machine with built-in stitch patterns, free arm, accessory storage, foot pedal control, and built-in light.

Feature	Description
Stitch Selection Dial	Select from multiple built-in stitch patterns
Stitch Length Control	Adjust stitch length from 0-4mm
Stitch Width Control	Adjust zigzag width from 0-5mm
Free Arm	Removable accessory compartment for sewing sleeves and cuffs
Built-in Buttonholer	One-step automatic buttonhole
Drop Feed	Lower feed dogs for darning and free-motion sewing
Reverse Stitch Lever	Reinforce seams with reverse stitching
Built-in Light	Illuminates sewing area
Spool Pins	Vertical and horizontal spool pin options
Accessory Storage	Built-in compartment for feet and accessories

Installation

Unpack and inspect contents. Place on stable sewing table.

Remove machine from packaging: Lift carefully from carrying case.
Position machine: Place on sturdy, level surface with adequate lighting.
Connect foot pedal: Plug into machine's foot control socket.
Connect power: Plug power cord into electrical outlet.
Install accessories: Attach standard presser foot and needle.

WARNING! Keep fingers away from needle area during operation. Always unplug machine when not in use or when changing needles.

First-Time Setup

Prepare machine for initial use with proper threading and bobbin winding.

Wind bobbin: Place thread on spool pin, guide through tension disc, and wind bobbin.
Insert bobbin: Place bobbin in bobbin case with thread pulling counterclockwise.
Thread upper thread: Follow numbered threading guide on machine.
Select stitch: Turn stitch selection dial to desired pattern.
Test sew: Use scrap fabric to test stitch quality and tension.

CAUTION! Ensure needle is properly inserted with flat side to the back. Use correct needle type for fabric.

Specifications

Model: Singer 2662
Serial Number: 13228944
Stitch Patterns: 6 built-in stitches including straight, zigzag, and decorative
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable for zigzag
Buttonhole: One-step automatic
Free Arm: Yes, with removable accessory compartment
Feed Dogs: Drop feed capability
Power: 110V, 60Hz
Included Accessories: All-purpose foot, buttonhole foot, zipper foot, seam ripper, needles, bobbins, darning plate

Controls and Settings

Main controls located on front and side of machine body.

Stitch Selection Dial: Turn to select desired stitch pattern (straight, zigzag, stretch, decorative).

Stitch Length Dial: Adjust from 0 (for darning) to 4mm (long basting stitches).

Stitch Width Dial: Adjust zigzag width from 0 (straight stitch) to 5mm (wide zigzag).

Reverse Stitch Lever: Press and hold to sew in reverse for seam reinforcement.

Bobbin Winder: Push bobbin winder to right position for bobbin winding.

Threading and Bobbin

Proper threading is essential for smooth operation.

Raise presser foot and needle to highest position.
Place thread spool on vertical spool pin.
Follow threading guide: Through first thread guide, around tension discs, through take-up lever, down to needle.
Thread needle from front to back.
For bobbin: Wind bobbin evenly, insert with thread pulling counterclockwise.
Bring up bobbin thread by holding upper thread and turning hand wheel toward you.

Tip: Always thread machine with presser foot raised to ensure proper tension.

Basic Sewing Operations

Fundamental sewing techniques for various projects.

Straight Stitch: Set stitch selection to straight, adjust length as needed.
Zigzag Stitch: Select zigzag pattern, adjust width for desired zigzag.
Buttonhole: Attach buttonhole foot, select buttonhole stitch, position fabric.
Reverse Stitching: Hold reverse lever to reinforce seam beginnings and ends.
Free Arm Sewing: Remove accessory compartment for sewing sleeves and cuffs.
Darning: Lower feed dogs and attach darning plate for free-motion work.

WARNING! Never pull fabric through machine - let feed dogs move fabric naturally.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Cleaning: Remove lint and dust from bobbin area and feed dogs regularly.
Oiling: Apply sewing machine oil to moving parts as indicated in diagram.
Needle Replacement: Change needle after 8-10 hours of sewing or for each new project.
Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Always unplug machine before cleaning or maintenance. Use only sewing machine oil.

Regulatory Information

UL Listed for household use. Complies with safety standards for sewing machines. Copyright © Singer Manufacturing Company. For support, visit www.singer.com or contact 1-800-4-SINGER. Serial number 13228944 registered for warranty purposes.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Re-thread completely; check tension settings; use quality thread.
Needle breaking	Bent needle/wrong size	Replace needle; ensure correct needle for fabric; don't pull fabric.
Uneven stitches	Tension issues	Adjust upper tension; re-thread; check bobbin threading.
Machine jams	Thread buildup	Remove bobbin case and clean; remove tangled threads.
Skip stitches	Dull/bent needle	Replace needle; ensure proper needle insertion.
No power	Power connection	Check power cord; ensure foot pedal is connected; check outlet.

Service: 1-800-4-SINGER; www.singer.com