Instruction Manual for Singer Sewing Machine Model 1022

The Singer Sewing Machine Model 1022 is a versatile mechanical sewing machine designed for home use, featuring straight stitch, zigzag stitch, and multiple decorative stitch patterns. It includes adjustable stitch length and width, built-in buttonholer, free arm capability, drop feed for darning and free-motion sewing, built-in light, reverse stitching, and easy threading system. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Mechanical sewing machine with built-in stitches, Free Arm, Stitch Selector Dial, Stitch Length Control, Stitch Width Control, Reverse Stitch Lever, Built-in Light, Foot Pedal.

Installation and Setup

Unpack and inspect contents. Place on stable surface at comfortable working height.

1. Remove machine from packaging: Lift carefully from carrying case.
2. Position machine: Place on sturdy table with adequate workspace around it.
3. Connect foot pedal: Plug into machine's pedal port.
4. Connect power: Plug power cord into machine and wall outlet (120V AC).
5. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Power on machine; follow threading diagram.

1. Wind bobbin: Place thread on spool pin, guide through bobbin winder tension, press pedal to wind.
2. Thread upper thread: Follow numbered threading path from spool to needle.
3. Insert bobbin: Place bobbin in bobbin case with thread pulling counterclockwise.
4. Test stitches: Select straight stitch, place fabric under presser foot, lower foot, press pedal.
5. Adjust tension: Test on scrap fabric; adjust tension dial if needed.

CAUTION! Always turn handwheel toward you; never force machine operation.

Specifications

• Machine Type: Mechanical Sewing Machine
• Stitch Patterns: 22 built-in stitches
• Stitch Length: 0-4 mm adjustable
• Stitch Width: 0-5 mm adjustable
• Buttonholes: One-step automatic
• Free Arm: Yes, for cylindrical sewing
• Feed System: Drop feed with feed dog lowering
• Lighting: Built-in LED light
• Power Source: 120V AC, 60Hz
• Weight: Approximately 12 lbs

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch Selector Dial, Stitch Length Control, Stitch Width Control, Reverse Stitch Lever, Power Switch.

Stitch Selection: Turn dial to desired stitch pattern. Stitch Length: Adjust for shorter/longer stitches. Stitch Width: Adjust for wider/narrower zigzag. Reverse: Hold lever for backstitching. Tension Control: Adjust for different fabrics (higher numbers for tighter tension). Presser Foot Pressure: Adjustable for different fabric thicknesses.

Stitch Selection and Applications

Select appropriate stitches for different sewing projects.

1. Straight Stitch: Basic sewing, seams (length 2.5-3.0 mm)
2. Zigzag Stitch: Finishing edges, stretch fabrics (width 3-4 mm)
3. Blind Hem Stitch: Nearly invisible hems
4. Decorative Stitches: Multiple patterns for embellishment
5. Buttonhole Stitch: Automatic one-step buttonholes
6. Elastic Stitch: For elastic and stretch fabrics

Tip: Always test stitches on scrap fabric before sewing project.

Threading and Bobbin Winding

Proper threading ensures smooth operation.

1. Bobbin Winding: Place thread on spool pin, guide through bobbin winder tension, place empty bobbin on winder, press pedal until full.
2. Upper Threading: Follow numbered path: spool pin → thread guide → tension discs → take-up lever → thread guide → needle.
3. Needle Threading: Pass thread through needle eye from front to back.
4. Bobbin Insertion: Remove bobbin case, insert bobbin with thread pulling counterclockwise, replace case.
5. Bring Up Bobbin Thread: Hold upper thread, turn handwheel toward you until bobbin thread appears.

WARNING! Ensure presser foot is raised when threading through tension discs.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Oil moving parts with sewing machine oil (2-3 drops).
3. Monthly: Clean tension discs with folded fabric or dental floss.
4. Needle Replacement: Replace needle after 8-10 hours of sewing or if damaged.
5. Storage: Cover machine when not in use; store in dry place.

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Accessories

Included accessories for various sewing tasks.

Regulatory Information

UL Listed: Complies with UL safety standards for household sewing machines. Copyright © 2025 Singer Manufacturing Company. All rights reserved. For technical support and service, visit www.singer.com or contact 1-800-4-SINGER. Made for household use only.

Troubleshooting

Service: 1-800-4-SINGER; www.singer.com