Instruction Manual for Husqvarna Viking 190 Sewing Machine

The Husqvarna Viking 190 is a versatile mechanical sewing machine designed for home use, featuring straight and zigzag stitches, built-in buttonholer, free arm capability, adjustable stitch length and width, built-in light, drop feed for darning and free-motion sewing, reverse stitching, and easy threading system. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading and Bobbin 8. Maintenance and Care 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Mechanical sewing head, built-in stitch patterns, free arm, bobbin winding system, foot pedal control, accessory storage.

FeatureDescription
Stitch Selection DialSelects straight stitch, zigzag, and decorative patterns
Stitch Length ControlAdjusts stitch length from 0-4mm
Stitch Width ControlAdjusts zigzag width up to 5mm
Reverse Stitch LeverReinforces stitching at beginning and end
Built-in ButtonholerCreates perfect buttonholes in one step
Free ArmRemovable extension table for sewing cuffs and sleeves
Drop Feed DogLowers feed dogs for darning and free-motion work
Built-in LightIlluminates sewing area
Bobbin WinderAutomatic bobbin winding system
Thread Tension DialAdjusts upper thread tension

Installation and Setup

Unpack and inspect contents. Place on stable surface at comfortable height.

  1. Remove machine from packaging and all protective materials.
  2. Place machine on sturdy table or sewing cabinet.
  3. Connect foot pedal to machine and plug into power outlet.
  4. Install needle following threading diagram.
  5. Wind and insert bobbin according to instructions.

WARNING! Keep fingers away from needle area during operation. Always turn off when not in use.

First-Time Operation

Power on machine; test basic functions.

  1. Thread machine: Follow numbered threading path on machine.
  2. Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
  3. Select straight stitch: Set stitch selection dial to straight stitch position.
  4. Test sew: Use scrap fabric to practice starting, stopping, and reversing.
  5. Adjust tension: Test on fabric scrap until stitches look even on both sides.

CAUTION! Always disconnect power when changing needles or performing maintenance.

Specifications

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, stitch length control, stitch width control, reverse stitch lever, thread tension dial.

Stitch Selection: Turn dial to select desired stitch pattern. Stitch Length: Adjust for shorter or longer stitches. Stitch Width: Controls zigzag width. Reverse: Hold lever for backstitching. Tension: Adjust for different fabrics and threads. Presser Foot Pressure: Adjustable for different fabric thicknesses.

Stitch Selection

Available stitches: straight, zigzag, blind hem, stretch, decorative.

  1. Straight Stitch: For basic sewing, topstitching, basting.
  2. Zigzag Stitch: For finishing edges, appliqué, stretch fabrics.
  3. Blind Hem: Nearly invisible hemming on garments.
  4. Stretch Stitch: For knit fabrics and elastic materials.
  5. Decorative Stitches: Multiple pattern options for embellishment.
  6. Buttonhole: 4-step process for perfect buttonholes.

Tip: Always test stitch on scrap fabric before sewing project.

Threading and Bobbin

Proper threading essential for good stitch quality.

  1. Raise presser foot and needle to highest position.
  2. Follow numbered threading path from spool to needle.
  3. Wind bobbin: Place thread on spool pin, wrap around tension disc, insert empty bobbin.
  4. Insert bobbin: Drop bobbin into case with thread unwinding counterclockwise.
  5. Pull bobbin thread up through throat plate.
  6. Hold both threads under presser foot when starting to sew.

WARNING! Never force thread through tension discs. Rethread if skipping steps.

Maintenance and Care

Regular maintenance ensures optimal performance.

  1. Clean lint from bobbin area after each project.
  2. Oil moving parts as recommended in manual.
  3. Change needles regularly (every 8-10 hours of sewing).
  4. Use compressed air to remove dust from internal mechanisms.
  5. Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Accessories

Standard accessories included with machine.

AccessoryPurpose
General Purpose FootBasic sewing on most fabrics
Zipper FootInstalling zippers and piping
Buttonhole FootCreating perfect buttonholes
Blind Hem FootNearly invisible hemming
Seam RipperRemoving stitches
BrushCleaning lint and dust
Extra BobbinsAdditional bobbins for thread colors
NeedlesAssorted sizes for different fabrics

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. Copyright © Husqvarna Viking. For support, visit www.husqvarnaviking.com or contact authorized service centers. Manufactured to meet international quality and safety standards.

Troubleshooting

SymptomPossible CauseCorrective Action
Thread breakingIncorrect threading/tensionRethread completely; adjust tension; check for burrs on needle.
Skipped stitchesWrong needle/thread combinationChange needle; ensure correct size for fabric; use quality thread.
Uneven stitchesTension issuesAdjust upper and bobbin tension; clean tension discs.
Machine jamsThread buildupRemove bobbin case; clean area; rethread carefully.
Noise during operationLack of lubricationOil according to manual; check for loose parts.
Needle breaksBent needle/wrong installationReplace needle; ensure flat side faces correct direction.

Service: Contact authorized Husqvarna Viking service center for repairs.

Support: www.husqvarnaviking.com

Instruction Manual for Husqvarna Viking 190 Sewing Machine © - All Rights Reserved 2025