Instruction Manual for Brother CS6000i Sewing Machine

The Brother CS6000i is a versatile 60-stitch computerized sewing machine featuring automatic needle threading, built-in LED lighting, adjustable sewing speed, drop-in bobbin system, automatic bobbin winding, multiple presser feet, and easy stitch selection. Designed for both beginners and experienced sewers with features like quilting, decorative stitching, and buttonhole functions. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Computerized stitch panel, automatic needle threader, drop-in bobbin system, LED work light, accessory storage, foot pedal control, and multiple presser feet.

Installation & Setup

Unpack and inspect all contents. Place on stable, flat surface.

1. Remove packaging materials and protective covers from machine.
2. Connect foot pedal to machine and plug into power outlet.
3. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.
4. Wind bobbin: Place bobbin on winder, thread through guide, press foot pedal to wind.
5. Insert bobbin: Drop bobbin into case with thread running counterclockwise.

WARNING! Keep fingers away from needle area during operation. Always turn off when threading.

First-Time Operation

Power on machine; follow setup procedure.

1. Thread machine: Follow numbered threading path from spool to needle.
2. Use automatic needle threader: Pull lever down and hook thread through needle eye.
3. Select stitch: Use stitch selection dial or buttons for desired pattern.
4. Adjust settings: Set stitch length and width as needed for fabric.
5. Begin sewing: Place fabric under presser foot, lower foot, press pedal gently.

CAUTION! Always use correct needle and thread for fabric type. Test stitches on scrap fabric first.

Specifications

• Stitches: 60 built-in stitches
• Buttonholes: One-step automatic buttonhole
• Needle Positions: Multiple positions with auto needle up/down
• Bobbin: Top drop-in bobbin system
• Lighting: LED work light
• Speed Control: Adjustable sewing speed
• Presser Feet: 6 included feet
• Power Source: 120V AC, 60Hz
• Warranty: 25-year limited warranty
• Weight: 13 pounds

Controls and Settings

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, stitch width/length controls, reverse stitch button.

Display: Stitch pattern indicators, recommended settings display, error codes.

Stitch Settings: Length (0-4mm), Width (0-7mm), tension adjustment (0-9). Special Functions: Auto needle threader, thread cutter, speed control slider, start/stop button. Memory: Stitch pattern memory for frequently used settings.

Stitch Selection

60 built-in stitches including basic, stretch, decorative, and quilting stitches.

1. Turn stitch selection dial to desired stitch pattern number.
2. View recommended settings on display panel.
3. Adjust stitch length and width as needed for fabric.
4. For buttonholes: Select buttonhole stitch, place button in foot, machine automatically sizes.
5. For decorative stitches: Use wider width settings and contrasting thread.

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin

Automatic threading system with drop-in bobbin.

1. Upper threading: Follow numbered path from spool pin to needle.
2. Automatic needle threader: Pull lever down, hook thread, release lever.
3. Bobbin winding: Place empty bobbin on winder, thread through guide, press pedal.
4. Bobbin insertion: Drop bobbin into case with thread running counterclockwise.
5. Pull up bobbin thread: Hold upper thread, turn handwheel toward you.

WARNING! Ensure machine is off during threading. Keep fingers clear of needle area.

Accessories Included

Standard accessories: 6 presser feet, needles, bobbins, seam ripper, cleaning brush, screwdriver, instructional DVD.

Care & Maintenance

Unplug before cleaning. Regular maintenance ensures optimal performance.

1. Clean lint from bobbin area after each project.
2. Oil machine as per manual instructions (use sewing machine oil only).
3. Replace needles regularly (every 8-10 hours of sewing).
4. Store in dust cover when not in use.
5. Avoid extreme temperatures and humidity.

CAUTION! Use only sewing machine oil. Never spray cleaners directly on machine.

Regulatory Information

UL Listed: Complies with UL safety standards. FCC Part 15: Class B digital device. Copyright © Brother Industries, Ltd. For support, visit www.brother-usa.com or contact 1-877-467-4289. Warranty registration required within 30 days of purchase.

Troubleshooting

Reset: Turn machine off and on to reset computerized functions.

Service: 1-877-467-4289; www.brother-usa.com