Husvarna N 1 Sewing Machine Manual

The Husvarna N 1 is a versatile mechanical sewing machine designed for home use, featuring straight and zigzag stitches, built-in buttonholer, free arm capability, adjustable stitch length and width, built-in light, reverse stitching, and drop feed for darning and quilting. Powered by 110-120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Basic Stitching 7. Advanced Functions 8. Maintenance & Cleaning 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Mechanical sewing head, built-in stitch patterns, free arm, bobbin winder, presser foot, needle position dial, stitch selector, tension control.

Feature	Description
Stitch Selection	Straight stitch, zigzag, stretch stitches
Built-in Buttonholer	One-step automatic buttonhole
Free Arm	For sewing cuffs and sleeves
Stitch Length Control	Adjustable from 0-4mm
Stitch Width Control	Adjustable up to 5mm for zigzag
Reverse Stitching	For securing seams
Drop Feed	For darning and free-motion quilting
Built-in Light	LED illumination of work area
Bobbin Winder	Automatic bobbin winding
Tension Control	Adjustable upper thread tension

Unpacking and Setup

Unpack and inspect contents. Place on stable surface.

Remove machine from packaging and all protective materials
Attach power cord to machine and plug into wall outlet
Install foot controller and connect to machine
Place machine on sturdy table or sewing cabinet
Install needle and thread machine following threading diagram

WARNING! Keep fingers away from moving needle. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; test basic functions.

Thread machine: Follow numbered threading path on machine
Wind bobbin: Place empty bobbin on winder, thread through tension disc
Insert bobbin: Drop bobbin into case with thread pulling counterclockwise
Test stitches: Use scrap fabric to test straight and zigzag stitches
Adjust tension: Check stitch formation and adjust tension as needed

CAUTION! Always unplug machine when not in use. Never pull fabric while needle is in material.

Specifications

Machine Type: Mechanical Sewing Machine
Stitches: 10 built-in stitches including straight, zigzag, stretch
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable for zigzag
Buttonhole: One-step automatic
Speed: Up to 800 stitches per minute
Needle System: HA-1 household needles
Bobbin: Class 15 transparent
Power Source: 110-120V AC, 60Hz
Weight: 12.5 lbs (5.7 kg)

Controls and Settings

Front Panel: Stitch selector dial, stitch length control, stitch width control, reverse stitch button, bobbin winder.

Additional Controls: Handwheel, presser foot lever, tension dial, free arm conversion, drop feed lever.

Stitch Selection: Turn dial to desired stitch pattern. Stitch Length: 0-4mm for different fabric types. Stitch Width: 0-5mm for decorative stitches. Tension: Adjust for balanced stitches (normal setting 4-5). Reverse: Hold button for backstitching.

Basic Stitching

Straight stitch for seams, zigzag for finishing edges and stretch fabrics.

Select straight stitch (position 1 on dial)
Set stitch length to 2.5mm for medium weight fabrics
Place fabric under presser foot, lower foot lever
Gently press foot controller to begin sewing
Use reverse stitch at beginning and end of seams
For zigzag: Select zigzag pattern, adjust width as needed

Tip: Always test stitches on scrap fabric before sewing project.

Advanced Functions

Buttonholes, decorative stitches, free-motion work.

Automatic Buttonhole: Position fabric, select buttonhole stitch, lower buttonhole lever
Decorative Stitches: Select pattern, adjust width and length for desired effect
Free Arm: Remove accessory tray for sewing sleeves and cuffs
Drop Feed: Lower feed dogs for darning and quilting
Zipper Installation: Use zipper foot for invisible and regular zippers
Button Sewing: Use button sewing foot for attaching buttons

WARNING! Always use appropriate presser foot for each function.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

Unplug machine before cleaning
Remove needle plate and clean lint from bobbin area
Oil moving parts with sewing machine oil (2-3 drops monthly)
Wipe exterior with soft, dry cloth
Replace needle after 8-10 hours of sewing

CAUTION! Use only sewing machine oil. Never use household oils.

Accessories

Standard accessories included with machine.

Accessory	Use
All-purpose Foot	General sewing
Zipper Foot	Installing zippers
Buttonhole Foot	Making buttonholes
Button Sewing Foot	Attaching buttons
Bobbin (4)	Extra bobbins
Needles (3)	Spare needles
Seam Ripper	Removing stitches
Brush	Cleaning lint
Screwdriver	Adjustments

Regulatory Information

UL Listed: Complies with UL safety standards. Copyright © 2024 Husvarna; trademarks of Husvarna Sewing Products. For technical support, visit www.husvarna-sewing.com or contact 1-800-555-1234. Made for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread machine; reduce tension; check for burrs on needle
Skip stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle type for fabric
Uneven stitches	Tension imbalance	Adjust upper tension; rethread bobbin
Machine jams	Thread buildup in bobbin	Remove bobbin case and clean; rethread carefully
No power	Power connection	Check power cord; ensure foot controller plugged in
Poor buttonholes	Stabilizer missing	Use stabilizer behind buttonhole area; check threading

Service: 1-800-555-1234; www.husvarna-sewing.com