Husqvarna Viking Platinum 730 Sewing Machine Manual

The Husqvarna Viking Platinum 730 is a premium computerized sewing machine featuring advanced stitch technology, automatic needle threader, built-in stitches, LCD display, speed control, automatic thread cutter, and versatile sewing functions for both beginners and experienced sewers. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Technical Specifications 5. Controls and Functions 6. Stitch Selection 7. Advanced Features 8. Maintenance & Cleaning 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Computerized control panel, Automatic needle threader, Built-in stitches, LCD display, Drop-in bobbin system, Speed control slider, Automatic thread cutter, Free arm capability.

Feature	Description
Automatic needle threader	Easy threading with push-button operation
Built-in stitches	Multiple decorative and utility stitches
LCD display	Shows stitch selection and settings
Drop-in bobbin	Top-loading bobbin system with clear cover
Speed control	Adjustable sewing speed from slow to fast
Automatic thread cutter	One-touch thread cutting
Free arm	Removable extension table for cylindrical sewing
Needle up/down	Programmable needle position
Buttonhole function	Automatic one-step buttonholes
Stitch length/width	Adjustable stitch dimensions

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

Remove packaging materials and protective covers.
Attach power cord to machine and plug into wall outlet.
Install foot controller in designated port.
Set up extension table and free arm as needed.
Wind and insert bobbin following threading diagram.

WARNING! Keep fingers away from needle area during operation. Always turn off when threading or changing accessories.

First-Time Operation

Power on machine; follow initial setup procedure.

Thread machine: Follow numbered threading path on machine.
Use automatic needle threader: Lower lever and push button.
Insert bobbin: Place in bobbin case with thread clockwise.
Select basic stitch: Choose straight stitch for practice.
Test sew on scrap fabric to check tension and stitch quality.

CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.

Technical Specifications

Stitches: 30 built-in stitches including utility, decorative, and stretch
Buttonholes: One-step automatic buttonholes
Stitch Length: Adjustable 0-4mm
Stitch Width: Adjustable 0-5mm
Speed: Up to 820 stitches per minute
Needle Positions: Multiple positions including left, center, right
Bobbin: Class 15 transparent bobbin
Power Supply: 110V, 60Hz
Dimensions: Standard sewing machine size with free arm
Weight: Approximately 22 lbs

Controls and Functions

Access functions via control panel buttons and LCD display. Front Panel: Power switch, Stitch selection buttons, Reverse stitch, Needle up/down, Thread cutter.

Control Panel: Stitch pattern selectors, Stitch length/width adjustment, LCD display, Function buttons, Speed control slider.

Basic Settings: Stitch selection, Length adjustment, Width adjustment, Tension control, Mirror image, Memory functions. Advanced: Automatic thread cutter, Needle position, Buttonhole settings, Decorative stitch combinations.

Stitch Selection

Choose from utility, decorative, and stretch stitches.

Press stitch selection button for desired category.
Use arrow keys to browse available stitches.
Select stitch number shown on LCD display.
Adjust length and width as needed for project.
Test stitch on scrap fabric before sewing project.

Tip: Refer to stitch chart in manual for recommended uses and settings.

Advanced Features

Automatic needle threader: Lower lever, place thread in hook, raise lever. Automatic thread cutter: Press button after sewing. Memory function: Store favorite stitch combinations. Mirror imaging: Create symmetrical stitch patterns. Needle stop position: Set needle to up or down when stopping.

Maintenance & Cleaning

Unplug machine before cleaning. Remove lint from bobbin area and feed dogs regularly.

Clean bobbin area with small brush after each project.
Oil machine according to maintenance schedule.
Wipe exterior with soft, dry cloth.
Replace needle regularly (every 8-10 hours of sewing).
Store with cover to prevent dust accumulation.

CAUTION! Never use compressed air for cleaning. Use only recommended sewing machine oil.

Accessories

Standard accessories included: Assorted presser feet, Bobbins, Needles, Seam ripper, Brush, Screwdriver, Power cord, Foot controller.

Accessory	Use
All-purpose foot	General sewing
Zipper foot	Installing zippers
Buttonhole foot	Creating buttonholes
Blind hem foot	Invisible hemming
Overcasting foot	Finishing seam edges

Regulatory Information

UL Listed: Complies with safety standards for household use. Copyright © Husqvarna Viking. For support, visit www.husqvarnaviking.com or contact customer service. Made for household use only. Not intended for commercial applications.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not running	Power connection	Check power cord; ensure machine is turned on; check foot controller connection.
Thread breaking	Tension/thread quality	Rethread machine; adjust tension; use quality thread; check for burrs on needle.
Uneven stitches	Threading/tension	Rethread upper and lower threads; clean bobbin area; adjust tension settings.
Fabric not feeding	Feed dogs	Check if feed dogs are lowered; clean feed dog area; check presser foot pressure.
Needle breaking	Wrong needle/bent needle	Replace needle; ensure correct needle type for fabric; check for proper installation.

Reset: Turn machine off and on to reset computerized functions.

Service: Contact authorized Husqvarna Viking service center for repairs.