Husqvarna Viking H Class E10 Sewing Machine Manual

The Husqvarna Viking H Class E10 is a premium computerized sewing machine featuring advanced stitching capabilities, automatic thread tension, built-in stitches, LCD display, automatic needle threader, drop feed for free-motion sewing, speed control, and built-in needle plate. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Advanced Functions 8. Maintenance & Cleaning 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Computerized control panel, LCD display, automatic needle threader, built-in stitches, drop feed mechanism, speed control slider, bobbin winding system.

Feature	Description
LCD Display	Shows stitch selection, settings, and recommendations
Automatic Needle Threader	Easy threading with push-button operation
Built-in Stitches	Multiple stitch patterns including utility, decorative, and buttonholes
Drop Feed	For free-motion sewing and quilting
Speed Control Slider	Adjustable sewing speed from slow to maximum
Automatic Thread Tension	Computer-controlled tension for perfect stitches
Bobbin Winding System	Built-in bobbin winding with automatic stop
Needle Up/Down	Programmable needle position
Start/Stop Button	Sew without foot control
Reverse Stitch	Reinforce seams with reverse sewing

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

Remove packaging materials and protective covers.
Place machine on flat, stable surface at comfortable height.
Connect foot control pedal to machine.
Plug power cord into machine and wall outlet.
Install needle according to manual instructions.
Wind bobbin and thread machine.

WARNING! Machine contains sharp needles and moving parts. Keep fingers away from needle area during operation.

First-Time Operation

Power on machine; follow setup procedure.

Turn power switch to ON position.
LCD display will illuminate showing default settings.
Select basic straight stitch using stitch selection buttons.
Practice sewing on scrap fabric to test tension and stitch quality.
Adjust thread tension if necessary using automatic settings.
Test reverse stitch function for seam reinforcement.

CAUTION! Always turn off power when changing needles or performing maintenance.

Specifications

Machine Type: Computerized Sewing Machine
Stitches: 100+ built-in stitches including utility, decorative, and quilting
Stitch Width: Up to 7mm
Stitch Length: Up to 5mm
Speed: Up to 1000 stitches per minute
Needle System: HAx1 standard needles
Bobbin: Automatic bobbin winding, Class 15 transparent bobbin
Display: LCD with stitch diagrams and settings
Power Source: 120V AC, 60Hz
Weight: Approximately 22 lbs (10 kg)

Controls and Settings

Access functions via control panel buttons and LCD display.

Control Panel: Power switch, stitch selection buttons, LCD display, automatic needle threader, reverse stitch, start/stop button, speed control slider.

Stitch Settings: Stitch length, stitch width, needle position, thread tension (automatic). Machine Functions: Bobbin winding, drop feed, needle up/down, mirror imaging, stitch elongation. Memory: Save favorite stitch combinations for quick access.

Stitch Selection

Choose from built-in utility, decorative, and specialty stitches.

Press stitch category button (utility, decorative, buttonhole).
Use arrow buttons to scroll through available stitches.
Selected stitch appears on LCD display with recommended settings.
Adjust stitch length and width if desired.
Test stitch on scrap fabric before sewing project.

Tip: Refer to stitch chart in manual for recommended uses and settings.

Advanced Functions

Automatic Buttonholes: One-step automatic buttonholes with sensor technology. Mirror Imaging: Create mirror image of selected stitches. Stitch Elongation: Adjust stitch length for decorative effects. Memory Function: Store up to 10 favorite stitch combinations. Needle Threader: Automatic needle threading with easy operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Unplug machine before cleaning or maintenance.
Clean bobbin area regularly with small brush.
Wipe exterior with soft, dry cloth.
Oil machine according to maintenance schedule in manual.
Replace needle regularly (every 8-10 hours of sewing).

CAUTION! Never use compressed air to clean machine as it can force lint into mechanisms.

Accessories

Standard accessories included: Foot control, power cord, accessory box, needles, bobbins, screwdriver, lint brush, seam ripper, spool caps. Optional accessories available: Various presser feet, extension table, carrying case, additional bobbins and needles.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL Listed for safety standards. Copyright © Husqvarna Viking; all rights reserved. For technical support and service, contact authorized Husqvarna Viking dealers or visit www.husqvarnaviking.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not starting	Power connection	Check power cord connection; ensure power switch is ON
Poor stitch quality	Threading/needle	Rethread machine; replace needle; check bobbin
Thread breaking	Tension/needle	Check threading path; replace needle; adjust tension
Fabric not feeding	Feed dogs	Ensure feed dogs are raised; clean feed dog area
Unusual noise	Lint/thread jam	Clean bobbin area; remove thread jam; check for lint

Reset: Turn machine off and on to reset computer functions.

Service: Contact authorized Husqvarna Viking service center for repairs.