Husqvarna Viking 6020 Sewing Machine Manual

The Husqvarna Viking 6020 is a versatile electronic sewing machine featuring 20 built-in stitches, one-step buttonhole, automatic needle threader, adjustable stitch length and width, free arm capability, built-in LED light, drop feed for free-motion sewing, and multiple presser feet. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection & Functions 7. Presser Feet & Accessories 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic stitch selection panel, automatic needle threader, free arm, built-in LED light, accessory compartment, foot pedal control.

Feature	Description
Built-in stitches	20 different stitch patterns including utility, decorative, and stretch stitches
One-step buttonhole	Automatic buttonhole creation with consistent results
Automatic needle threader	Easy threading with push-button mechanism
Free arm capability	Removable extension table for sewing cuffs and sleeves
LED work light	Bright illumination of sewing area
Stitch length/width control	Adjustable settings for customization
Drop feed mechanism	For free-motion quilting and darning
Reverse stitch button	For securing stitches at beginning and end
Power switch	Turns machine on/off
Foot pedal control	Variable speed control for sewing

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

Remove machine from packaging: Carefully lift machine from box, remove protective materials.
Install foot pedal: Connect foot pedal cord to machine port.
Connect power: Plug power cord into machine and electrical outlet.
Attach accessories: Install standard presser foot, thread spool pins, and bobbin winder.
Position machine: Ensure stable placement with adequate workspace around machine.

WARNING! Machine contains electrical components; keep away from water and moisture. Ensure proper ventilation around machine.

First-Time Operation

Power on machine; follow setup procedures.

Thread the machine: Follow numbered threading path on machine; use automatic needle threader.
Wind bobbin: Place empty bobbin on winder, thread through tension disc, and engage winder.
Insert bobbin: Place wound bobbin in bobbin case following directional arrows.
Select basic stitch: Choose straight stitch for initial testing.
Test sew: Use scrap fabric to test machine operation and tension.

CAUTION! Always turn off machine when threading needle or changing accessories. Keep fingers away from moving needle.

Specifications

Stitch Selection: 20 built-in stitches
Buttonhole: One-step automatic
Needle Threading: Automatic push-button system
Stitch Length: Adjustable 0-4mm
Stitch Width: Adjustable 0-5mm
Free Arm: Yes, with removable extension table
Lighting: Built-in LED work light
Feed System: Drop feed for free-motion sewing
Power Source: Standard household electrical outlet
Included Accessories: Multiple presser feet, bobbins, needles, seam ripper, brush

Controls and Settings

Access functions via control panel and mechanical dials. Front Panel: Power switch, stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

Control Panel: Stitch pattern symbols, needle up/down position indicator, bobbin winding position, tension adjustment dial.

Stitch Selection: Rotate dial to choose from 20 built-in stitches. Stitch Length: Adjust from 0mm (darning) to 4mm (basting). Stitch Width: Adjust decorative stitches from 0-5mm. Tension: Adjust thread tension dial for balanced stitches. Reverse: Press and hold for backstitching.

Stitch Selection & Functions

Supports utility, decorative, and stretch stitches.

Straight Stitch: Basic sewing, position 1-2 on dial.
Zigzag Stitch: Overcasting, appliqué, position 3-4.
Blind Hem: Nearly invisible hems, position 5.
Stretch Stitches: For knit fabrics, positions 6-8.
Decorative Stitches: Embellishment stitches, positions 9-15.
Buttonhole: Automatic one-step, position 16.
Satin Stitches: Dense zigzag for decorative work.
Basting Stitch: Long stitches for temporary sewing.

Tip: Always test stitch on scrap fabric before sewing project. Adjust tension as needed for different fabrics.

Presser Feet & Accessories

Multiple specialized feet included for different sewing techniques.

Presser Foot	Function
Standard Foot	General sewing, straight and zigzag stitches
Zipper Foot	Installing zippers, cording, piping
Buttonhole Foot	Automatic buttonhole creation
Blind Hem Foot	Creating nearly invisible hems
Overcasting Foot	Finishing fabric edges to prevent fraying

Accessories Included: Assorted needles, bobbins, seam ripper, cleaning brush, screwdriver, spool caps.

Maintenance & Cleaning

Unplug machine before maintenance. Regular cleaning ensures optimal performance.

Daily: Remove lint and dust from bobbin area and feed dogs.
Weekly: Oil moving parts as specified in lubrication points diagram.
Monthly: Clean tension discs and check needle bar for smooth operation.
As needed: Replace needle after 8-10 hours of sewing or when damaged.

CAUTION! Use only recommended sewing machine oil. Never use household oils or lubricants.

Regulatory Information

CE certified: Complies with European safety standards. Copyright © Husqvarna Viking; trademarks of VSM Group AB. For support, visit www.husqvarnaviking.com or contact authorized service centers. Machine designed for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord connection; ensure foot pedal is plugged in; verify power switch is on.
Thread breaking	Tension/needle issues	Re-thread machine; check needle for damage; reduce tension; use correct needle for fabric.
Uneven stitches	Threading/tension	Re-thread upper and lower threads; clean tension discs; check bobbin insertion.
Fabric not feeding	Feed dogs	Ensure feed dogs are raised; clean feed dog area; check presser foot pressure.
Needle breaking	Installation/fabric	Ensure needle is fully inserted; use correct needle size; avoid pulling fabric.
Bobbin issues	Winding/insertion	Rewind bobbin evenly; ensure bobbin inserted correctly in case; check bobbin tension.

Service: Contact authorized Husqvarna Viking service center for electrical or mechanical repairs.

Support: www.husqvarnaviking.com or local authorized dealers