Husqvarna Viking 500 Sewing Machine Manual

The Husqvarna Viking 500 is a versatile electronic sewing machine featuring computerized stitch selection, automatic needle threading, built-in stitches, adjustable stitch length and width, drop feed for free-motion sewing, speed control, and built-in buttonhole functions. Designed for home sewing enthusiasts with easy-to-use controls and advanced features for professional results. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Advanced Functions 8. Maintenance & Cleaning 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic sewing machine with LCD display, automatic needle threader, built-in stitches, drop feed mechanism, speed control slider, and accessory compartment.

Feature	Description
LCD Display	Shows selected stitch, length, width and settings
Automatic Needle Threader	Easy needle threading with lever mechanism
Built-in Stitches	Multiple utility, decorative, and stretch stitches
Drop Feed	Lowers feed dogs for free-motion sewing
Speed Control	Adjustable sewing speed with slider control
Buttonhole Function	Automatic one-step buttonholes
Needle Up/Down	Programmable needle position
Reverse Stitch	Reinforcement stitching at touch of button
Bobbin Winding	Built-in bobbin winding system
Accessory Storage	Built-in compartment for feet and accessories

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

Remove packing materials: Carefully remove all protective packaging and tape.
Position machine: Place on flat, stable surface at comfortable height.
Connect foot control: Plug foot pedal into machine port.
Connect power: Plug power cord into machine and electrical outlet.
Install needle: Insert needle with flat side to back, tighten screw.
Wind bobbin: Follow bobbin winding instructions in manual.

WARNING! Keep fingers away from needle area during operation. Always turn off when threading or changing accessories.

First-Time Operation

Power on machine; follow basic setup procedures.

Thread machine: Follow threading path indicated on machine.
Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
Select stitch: Choose basic straight stitch for initial testing.
Test sew: Use scrap fabric to test stitch formation.
Adjust tension: Check stitch quality and adjust tension if needed.
Practice controls: Familiarize yourself with speed control and reverse.

CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.

Specifications

Machine Type: Electronic computerized sewing machine
Stitches: Built-in utility, decorative, and stretch stitches
Stitch Length: Adjustable 0-4mm
Stitch Width: Adjustable 0-5mm
Buttonholes: One-step automatic buttonholes
Needle Positions: Multiple positions with needle stop up/down
Presser Feet: Standard, zipper, buttonhole, and specialty feet included
Power Source: 120V AC, 60Hz
Warranty: Limited manufacturer warranty

Controls and Settings

Access functions via control panel buttons and dials. Main Controls: Power switch, stitch selection dial, stitch length/width controls, reverse button, needle up/down.

Display: LCD shows selected stitch number, length, width settings. Stitch Selection: Turn dial to choose from built-in stitches. Adjustment Controls: Separate dials for stitch length and width. Function Buttons: Reverse stitch, needle position, automatic thread cutter (if equipped).

Settings: Thread tension control, presser foot pressure adjustment, feed dog control, bobbin winding mode.

Stitch Selection

Choose from built-in stitches for various sewing applications.

Straight Stitch: Basic sewing, topstitching, basting
Zigzag Stitch: Seam finishing, appliqué, decorative work
Stretch Stitches: For knit fabrics and elastic materials
Decorative Stitches: Ornamental patterns for embellishment
Buttonhole Stitch: Automatic one-step buttonholes
Blind Hem: Nearly invisible hemming
Overcast: Seam finishing to prevent fraying

Tip: Always test stitch on scrap fabric before sewing project.

Advanced Functions

Utilize advanced features for professional results.

Drop Feed: Lower feed dogs for free-motion quilting and darning
Needle Threader: Use automatic needle threading lever
Speed Control: Adjust maximum sewing speed with slider
Mirror Imaging: Create symmetrical decorative patterns
Memory Function: Store frequently used stitch combinations
Twin Needle: Use twin needle for parallel stitching
Automatic Tension: Built-in tension control for different fabrics

WARNING! Do not force controls or use excessive pressure on dials.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Brush out lint from bobbin area and feed dogs
Weekly: Oil machine according to lubrication points in manual
Monthly: Clean exterior with soft, dry cloth
As needed: Replace needle after 8-10 hours of sewing
Seasonal: Professional servicing recommended annually

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Accessories

Standard accessories included with Husqvarna Viking 500.

Accessory	Purpose
All-purpose Foot	General sewing
Zipper Foot	Installing zippers
Buttonhole Foot	Automatic buttonholes
Blind Hem Foot	Nearly invisible hems
Overedge Foot	Seam finishing
Bobbin (extra)	Additional bobbins
Needles	Assorted sizes
Seam Ripper	Removing stitches
Brush	Lint removal
Screwdriver	Needle replacement

Regulatory Information

UL Listed: Complies with UL safety standards for household sewing machines. Copyright © Husqvarna Viking; trademarks of VSM Group AB. For technical support and service, contact authorized Husqvarna Viking dealers. Manufacturer: VSM Group AB, Sweden. Distributed in North America by Husqvarna Viking.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread completely; reduce tension; check for burrs on needle.
Skip stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle for fabric type.
Bobbin issues	Incorrect winding/insertion	Rewind bobbin evenly; ensure correct insertion direction.
Machine jams	Thread buildup/poor quality thread	Clean bobbin area; use quality thread; check for proper threading.
Uneven stitches	Tension issues/fabric feeding	Adjust upper and bobbin tension; check presser foot pressure.
No power	Power connection/foot control	Check power cord connections; test outlet; inspect foot control.

Reset: Turn machine off and on to reset electronic functions.

Service: Contact authorized Husqvarna Viking service center for repairs.