Husqvarna Viking 150 Sewing Machine Manual

The Husqvarna Viking 150 is a versatile mechanical sewing machine designed for home use, featuring straight and zigzag stitches, built-in buttonholer, free arm capability, adjustable stitch length and width, built-in light, reverse stitching, and drop feed for darning and free-motion sewing. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Mechanical sewing machine, foot pedal, power cord, accessory box with presser feet, bobbins, needles, and seam ripper.

Unpacking and Setup

Remove machine from packaging and inspect all components.

1. Place machine on stable, flat surface at comfortable working height.
2. Attach power cord to machine and plug into grounded outlet.
3. Connect foot pedal to machine.
4. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.
5. Wind bobbin: Place thread on spool pin, guide thread through bobbin winder tension, wind bobbin evenly.
6. Insert bobbin: Place bobbin in bobbin case with thread running counterclockwise.

WARNING! Keep fingers away from needle area during operation. Always unplug machine when not in use.

First-Time Operation

Thread machine and perform test stitches.

1. Raise presser foot and raise needle to highest position.
2. Thread upper thread: Follow numbered threading guide on machine.
3. Pull up bobbin thread: Hold upper thread, turn hand wheel toward you to bring up bobbin thread.
4. Place fabric under presser foot, lower presser foot lever.
5. Practice stitching on scrap fabric to test tension and stitch quality.
6. Adjust stitch length and width as needed for your project.

CAUTION! Always start with needle in highest position. Never pull fabric while sewing.

Specifications

• Machine Type: Mechanical sewing machine
• Stitches: Straight stitch, zigzag stitch, automatic buttonhole
• Stitch Length: 0-4 mm adjustable
• Stitch Width: Up to 5 mm for zigzag
• Max Sewing Speed: 800 stitches per minute
• Needle System: HAx1 standard domestic needles
• Bobbin: Class 15 transparent bobbin
• Presser Feet: Standard snap-on system
• Power Requirements: 110-120V, 60Hz
• Weight: Approximately 11 lbs (5 kg)

Controls and Settings

Main controls located on front and side of machine.

Stitch Selector: Dial for choosing straight or zigzag stitch patterns.

Stitch Length Dial: Controls distance between stitches (0-4 mm).

Stitch Width Dial: Adjusts zigzag width (0-5 mm).

Reverse Stitch Button: Hold down for backward stitching to secure seams.

Hand Wheel: Manual control of needle position.

Bobbin Winder: Separate mechanism for winding bobbins.

Drop Feed Lever: Lowers feed dogs for free-motion work.

Basic Stitching

Fundamental sewing techniques for everyday projects.

1. Straight Stitch: Set stitch selector to straight position, adjust length as needed.
2. Zigzag Stitch: Set stitch selector to zigzag, adjust width and length for desired effect.
3. Seam Finishing: Use zigzag stitch along raw edges to prevent fraying.
4. Reinforcing: Use reverse stitch at beginning and end of seams.
5. Gathering: Use longest straight stitch, pull bobbin thread to gather fabric.

Tip: Always test stitch settings on scrap fabric before sewing your project.

Advanced Functions

Special features for specific sewing tasks.

1. Automatic Buttonhole: Attach buttonhole foot, set stitch selector to buttonhole symbol, place button in foot, machine creates perfect buttonhole.
2. Free Arm Sewing: Remove extension table for sewing sleeves, cuffs, and pant legs.
3. Darning and Quilting: Lower feed dogs using drop feed lever for free-motion work.
4. Zipper Installation: Use zipper foot for invisible and standard zipper applications.
5. Blind Hem: Use blind hem foot and appropriate stitch setting for nearly invisible hems.

WARNING! Always use correct presser foot for each function to prevent damage.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Unplug machine before any maintenance.
2. Clean lint from bobbin area and feed dogs after each project.
3. Oil machine according to manual instructions using only sewing machine oil.
4. Replace needle regularly (after 8-10 hours of sewing).
5. Check belt tension periodically.
6. Store machine covered when not in use.

CAUTION! Never use compressed air to clean machine as it can force lint deeper into mechanism.

Safety Information

Important safety precautions for machine operation.

• Always unplug machine when changing needles, cleaning, or not in use.
• Keep fingers away from moving needle and presser foot.
• Do not sew over pins - remove them as you sew.
• Use proper lighting to see sewing area clearly.
• Keep hair and loose clothing away from moving parts.
• Do not operate machine if cord or foot pedal is damaged.
• Supervise children and beginners closely.

Troubleshooting

Service: For technical support, contact Husqvarna Viking customer service at 1-800-358-0001 or visit www.husqvarnaviking.com