Husqvarna Automatic Sewing Machine Manual

The Husqvarna Automatic Sewing Machine is a premium computerized sewing system featuring automatic thread tension, built-in stitches, LCD display, automatic needle threader, speed control, built-in needle plate, drop feed for free-motion sewing, automatic buttonhole function, and programmable stitch memory. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Basic Sewing Operations 8. Advanced Functions 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Computerized control panel, LCD display, automatic needle threader, built-in stitch patterns, speed control slider, bobbin winding system, accessory storage compartment.

FeatureDescription
LCD DisplayShows selected stitch, settings, and error messages
Automatic Needle ThreaderEasily threads needle with lever mechanism
Built-in StitchesOver 100 stitch patterns including utility, decorative, and quilting
Speed Control SliderAdjusts sewing speed from slow to maximum
Automatic Thread TensionComputer-controlled tension for perfect stitches
One-Step ButtonholeAutomatic buttonhole function with sensor
Drop FeedLower feed dogs for free-motion sewing
Programmable MemoryStore custom stitch combinations
Needle Up/DownProgrammable needle position
Bobbin WindingBuilt-in bobbin winding system

Installation

Unpack and inspect contents. Place on stable sewing table.

  1. Remove packaging materials and protective covers.
  2. Place machine on flat, stable surface at comfortable height.
  3. Install foot controller: Plug into machine port.
  4. Connect power cord to machine and electrical outlet.
  5. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
  6. Wind bobbin: Follow bobbin winding instructions.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable placement.

First-Time Setup

Power on machine; follow initial setup procedure.

  1. Thread machine: Follow threading path indicated on machine.
  2. Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
  3. Select basic stitch: Use stitch selection buttons.
  4. Test sew on scrap fabric to check tension and stitch quality.
  5. Adjust settings as needed using LCD menu.

CAUTION! Keep fingers away from needle area during operation.

Specifications

Controls and Settings

Access functions via control panel and LCD menu.

Front Panel: Power switch, stitch selection buttons, reverse stitch, needle up/down, automatic thread cutter.

LCD Menu: Stitch selection, stitch length/width adjustment, tension control, needle position, mirror image, memory functions.

Basic Settings: Stitch type, length, width, tension. Advanced Settings: Programmable needle stop position, automatic thread cutting, speed limiting, stitch combination memory.

Connecting Accessories

Various presser feet and accessories available for different sewing techniques.

  1. Turn off machine before changing accessories.
  2. Raise presser foot lever.
  3. Snap on appropriate presser foot.
  4. Lower presser foot to secure.
  5. Select corresponding stitch pattern if required.

Common Accessories: Zigzag foot, buttonhole foot, zipper foot, blind hem foot, quilting guide, seam ripper, cleaning brush.

Basic Sewing Operations

Step-by-step guide for fundamental sewing tasks.

  1. Straight Stitch: Select straight stitch, adjust length as needed.
  2. Zigzag Stitch: Choose zigzag, adjust width and length.
  3. Buttonhole: Use automatic buttonhole function with sensor.
  4. Reverse Stitching: Press reverse button to secure seams.
  5. Bobbin Replacement: Follow indicator when bobbin runs low.
  6. Thread Changing: Use automatic thread cutter for clean cuts.

Tip: Always test stitches on scrap fabric before sewing project.

Advanced Functions

Utilize computerized features for complex sewing projects.

  1. Stitch Memory: Program and store custom stitch sequences.
  2. Mirror Imaging: Create symmetrical decorative stitches.
  3. Speed Control: Adjust maximum sewing speed for control.
  4. Automatic Tension: Let machine adjust tension for different fabrics.
  5. Needle Positioning: Program needle to stop in up or down position.
  6. Stitch Combinations: Combine multiple stitches for unique effects.

WARNING! Read advanced function instructions carefully before use.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

  1. Daily: Brush out lint from bobbin area and feed dogs.
  2. Weekly: Oil machine according to lubrication points diagram.
  3. Monthly: Clean race hook and surrounding mechanism.
  4. As Needed: Replace needle regularly, especially when dull or bent.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oil.

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2025 Husqvarna Viking; trademarks of VSM Group AB. For support, visit www.husqvarnaviking.com or contact 1-800-358-0001.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower connectionCheck power cord; ensure foot controller is plugged in properly.
Thread breakingTension/thread qualityCheck threading path; reduce tension; use quality thread.Uneven stitchesNeedle/tension issuesReplace needle; check upper and lower thread tension.
Fabric not feedingFeed dogs loweredRaise feed dogs; check presser foot pressure.
Bobbin thread issuesBobbin insertionReinsert bobbin ensuring correct direction; check bobbin case.
Error messages on displayVarious causesConsult error code chart in manual; reset machine if needed.

Reset: Turn machine off and on to clear temporary errors.

Service: 1-800-358-0001; www.husqvarnaviking.com

Husqvarna Automatic Sewing Machine Manual © - All Rights Reserved 2025