Husqvarna 300 Sewing Machine Manual

The Husqvarna 300 is a versatile mechanical sewing machine designed for home use, featuring multiple stitch patterns, adjustable stitch length and width, built-in buttonholer, free arm capability, drop feed for free-motion sewing, built-in needle threader, top-loading bobbin system, and LED lighting. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Mechanical sewing machine with built-in stitches, Free arm, Bobbin system, Needle threader, Stitch selection dial, Tension control, Feed dogs, LED work light.

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

1. Remove packaging materials and protective covers.
2. Place machine on flat, stable surface at comfortable working height.
3. Connect foot control pedal to machine and power outlet.
4. Install needle following arrow direction and tighten screw.
5. Wind and insert bobbin following threading diagram.
6. Thread upper thread through guides and needle using built-in threader.

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Operation

Plug in machine; test basic functions.

1. Power on: Connect to electrical outlet and turn on power switch.
2. Test stitch: Select straight stitch with medium length on scrap fabric.
3. Adjust tension: Check stitch formation and adjust tension if needed.
4. Practice controls: Familiarize with stitch selection, reverse, and speed control.
5. Test buttonhole: Use automatic buttonhole function with practice fabric.

CAUTION! Always start with needle in highest position. Keep work area well-lit.

Specifications

• Machine Type: Mechanical sewing machine
• Stitches: 22 built-in stitches including utility and decorative
• Stitch Length: 0-4mm adjustable
• Stitch Width: Up to 5mm for zigzag stitches
• Buttonhole: 1-step automatic buttonhole
• Bobbin: Top-loading, class 15 transparent bobbin
• Needle System: HAx1 standard domestic needles
• Free Arm: Yes, convertible flatbed to free arm
• Lighting: LED work light
• Power Source: Standard household electrical outlet
• Weight: Approximately 6.5 kg

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, Stitch length control, Stitch width control, Reverse stitch button, Bobbin winder, Power/light switch.

Side Controls: Handwheel, Feed dog lever, Tension dial, Presser foot lever.

Stitch Selection: Turn dial to select desired stitch pattern. Stitch Length: Adjust for shorter or longer stitches. Stitch Width: Control zigzag and decorative stitch width. Tension: Adjust for balanced stitch formation. Feed Dogs: Lower for free-motion sewing or darning.

Stitch Selection

22 built-in stitches for various sewing applications.

1. Straight Stitch: Basic sewing, topstitching (positions 1-2)
2. Zigzag Stitch: Seam finishing, appliqué (positions 3-5)
3. Blind Hem: Nearly invisible hemming (position 6)
4. Stretch Stitches: For knit fabrics (positions 7-9)
5. Decorative Stitches: Embellishment and trim (positions 10-18)
6. Buttonhole: Automatic 1-step buttonhole (position 19)

Tip: Always test stitch on scrap fabric of same type before sewing project.

Basic Sewing Techniques

Fundamental sewing operations and procedures.

1. Threading: Follow numbered guides; use built-in needle threader.
2. Bobbin winding: Place spool on pin, thread through guides, wind evenly.
3. Starting to sew: Lower presser foot, begin slowly, backstitch to secure.
4. Seam sewing: Guide fabric gently, let feed dogs move material.
5. Turning corners: Stop with needle down, lift presser foot, pivot fabric.
6. Finishing: Backstitch, raise needle and presser foot, cut threads.
7. Buttonholes: Mark position, select buttonhole stitch, follow automatic cycle.

WARNING! Never pull fabric while sewing. Let machine feed material naturally.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Remove needle plate and clean underneath.
3. Monthly: Oil moving parts according to lubrication points diagram.
4. As needed: Replace needle after 8-10 hours of sewing.
5. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Always unplug machine before cleaning or maintenance. Use only recommended oils.

Accessories

Standard accessories included with Husqvarna 300.

Regulatory Information

CE certified: Complies with European safety standards. Copyright © Husqvarna Viking. For support, visit www.husqvarnaviking.com or contact your local authorized dealer. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

Troubleshooting

Service: Contact authorized Husqvarna Viking service center for repairs.

Support: www.husqvarnaviking.com or local authorized dealer