Husqvarna 2000 Sewing Machine Instruction Manual

The Husqvarna 2000 is a high-quality sewing machine featuring advanced stitching capabilities, built-in stitches, automatic threading, adjustable stitch length and width, free arm capability, built-in needle threader, drop feed for free-motion sewing, and various presser feet options. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading and Bobbin 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main body with free arm, stitch selection dial, tension control, bobbin case, presser foot system, built-in light, foot pedal control.

Feature	Description
Built-in stitches	Multiple stitch patterns including straight, zigzag, and decorative stitches
Free arm capability	Removable extension table for sewing sleeves and cuffs
Automatic needle threader	Easy threading with built-in threader
Drop feed mechanism	For free-motion quilting and darning
Stitch length control	Adjustable from 0-4mm
Stitch width control	Adjustable zigzag width up to 5mm
Reverse stitch button	For reinforcing seams
Built-in light	Illuminates sewing area
Foot pedal control	Variable speed control
Presser foot pressure	Adjustable for different fabrics

Unpacking and Setup

Unpack and inspect contents. Place on stable surface at proper height.

Remove machine from packaging: Carefully lift machine from box.
Attach power cord: Plug into machine and wall outlet.
Install foot pedal: Connect to machine port.
Install accessory box: Attach to free arm if included.
Position machine: Ensure stable, level surface with adequate lighting.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure electrical connections are secure.

First-Time Operation

Power on machine; follow setup procedures.

Thread machine: Follow threading path indicated on machine.
Wind bobbin: Use built-in bobbin winder.
Insert bobbin: Place in bobbin case following directional arrows.
Select stitch: Turn dial to desired stitch pattern.
Test sew: Use scrap fabric to test settings.
Adjust tension: Fine-tune for different fabric types.

CAUTION! Keep fingers away from needle area during operation. Always turn off when threading.

Specifications

Machine Type: Electronic sewing machine
Stitches: 20+ built-in stitches
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Speed: Up to 800 stitches per minute
Free Arm: Yes, with removable extension table
Needle System: HAx1 standard
Bobbin: Class 15 transparent
Power Source: 110-120V AC, 60Hz
Weight: Approximately 15 lbs
Warranty: 25-year limited warranty

Controls and Settings

Access controls via front panel and dials. Main Controls: Power switch, stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

Additional Features: Built-in needle threader, thread cutter, presser foot lever, hand wheel, bobbin winder.

Stitch Selection: Straight stitch, zigzag, stretch stitches, decorative stitches, buttonhole. Tension Control: Upper thread tension dial (0-9). Presser Feet: Standard, zipper, buttonhole, blind hem, walking foot available.

Stitch Selection

Supports various stitch types for different sewing applications.

Straight Stitch: For basic sewing and seams
Zigzag Stitch: For finishing edges and stretch fabrics
Buttonhole: Automatic one-step buttonhole
Decorative Stitches: Multiple patterns for embellishment
Blind Hem: Nearly invisible hemming
Stretch Stitches: For knit fabrics

Tip: Always test stitch on scrap fabric before sewing project.

Threading and Bobbin

Proper threading ensures optimal performance.

Raise needle: Turn hand wheel to highest position.
Place spool: On spool pin with thread unwinding correctly.
Follow threading path: Through guides and tension discs.
Use needle threader: Pull lever down and through needle eye.
Wind bobbin: Place empty bobbin on winder, engage mechanism.
Insert bobbin: Drop into case following directional arrow.
Pull up bobbin thread: Turn hand wheel to bring up thread.

WARNING! Always disconnect power when threading needle. Keep fingers clear of moving parts.

Maintenance & Cleaning

Unplug before maintenance. Regular cleaning ensures longevity.

Clean lint: Remove bobbin case and brush out lint regularly.
Oil machine: Use sewing machine oil as indicated in manual.
Change needle: Replace after 8-10 hours of sewing or if damaged.
Clean exterior: Use soft, dry cloth only.

CAUTION! Do not use compressed air for cleaning. Use only recommended sewing machine oil.

Regulatory Information

UL Listed: Complies with safety standards for household use. Copyright © Husqvarna Viking; trademarks of VSM Group AB. For support, visit www.husqvarnaviking.com or contact authorized service centers. Made in Sweden.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Re-thread completely; adjust tension; check for burrs on needle.
Skipped stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle for fabric type.
Uneven stitches	Tension issues	Adjust upper and bobbin tension; re-thread.
Machine not feeding	Feed dogs lowered	Raise feed dogs; clean under throat plate.
Noisy operation	Lint buildup/needs oil	Clean lint from bobbin area; oil according to manual.
Needle breaks	Wrong needle/bent needle	Replace needle; ensure properly inserted; check for obstruction.

Service: Contact authorized Husqvarna Viking service center for repairs.

Support: www.husqvarnaviking.com or local authorized dealers