Husqvarna 190 Sewing Machine Manual

The Husqvarna 190 is a versatile mechanical sewing machine designed for home use, featuring multiple stitch patterns, adjustable stitch length and width, built-in buttonholer, free arm capability, built-in needle threader, drop feed for free-motion sewing, and reverse stitching. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Basic Sewing Techniques 8. Maintenance & Cleaning 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Mechanical sewing machine with built-in stitches, free arm, accessory compartment, foot pedal, power cord, and instruction manual.

FeatureDescription
Built-in stitchesMultiple stitch patterns including straight, zigzag, and decorative stitches
Stitch length controlAdjustable from 0-4mm for different fabric types
Stitch width controlAdjustable zigzag width up to 5mm
Built-in buttonholerOne-step automatic buttonhole function
Free arm capabilityRemovable extension table for sewing sleeves and cuffs
Built-in needle threaderEasy threading mechanism
Drop feedFor free-motion sewing and darning
Reverse stitchFor reinforcing seams
Bobbin windingBuilt-in bobbin winding system
Accessory storageBuilt-in compartment for feet and accessories

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

  1. Remove machine from packaging: Carefully lift machine from box.
  2. Attach extension table: Slide onto free arm until it clicks into place.
  3. Connect foot pedal: Plug into machine's pedal port.
  4. Connect power: Plug power cord into machine and wall outlet.
  5. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
  6. Wind bobbin: Follow bobbin winding instructions in manual.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable surface placement.

First-Time Operation

Power on machine; follow setup procedures.

  1. Thread machine: Follow threading path indicated on machine.
  2. Insert bobbin: Place bobbin in bobbin case with thread pulling counterclockwise.
  3. Select stitch: Turn stitch selection dial to desired pattern.
  4. Adjust settings: Set stitch length and width according to fabric.
  5. Test sew: Use scrap fabric to test stitch quality.
  6. Practice techniques: Try straight stitch, zigzag, and reverse functions.

CAUTION! Keep fingers away from needle area during operation.

Specifications

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse button, bobbin winder.

Stitch Selection: Turn dial to select from 19 built-in stitches including straight, zigzag, stretch, and decorative patterns. Stitch Length: Adjust from 0-4mm (0 for darning, 4 for basting). Stitch Width: Adjust zigzag width from 0-5mm. Reverse: Press and hold for backstitching. Bobbin Winding: Wind bobbin without threading needle.

Stitch Selection

Select appropriate stitches for different sewing projects.

  1. Straight stitch: For basic seams (position 1)
  2. Zigzag stitch: For finishing edges and stretch fabrics
  3. Blind hem stitch: For invisible hemming
  4. Elastic stitch: For sewing elastic and stretch fabrics
  5. Decorative stitches: For embellishments (positions 13-19)
  6. Buttonhole stitch: One-step automatic buttonhole

Tip: Always test stitch on scrap fabric before sewing project.

Basic Sewing Techniques

Fundamental sewing operations with Husqvarna 190.

  1. Straight seam: Guide fabric evenly under presser foot.
  2. Zigzag finish: Sew along raw edges to prevent fraying.
  3. Buttonhole: Mark position, use one-step buttonhole function.
  4. Free arm sewing: Remove extension table for sleeves and cuffs.
  5. Reverse stitching: Press reverse button to secure seams.
  6. Gathering: Use longer stitch length and pull bobbin thread.
  7. Darning: Drop feed dogs for free-motion mending.

WARNING! Always turn handwheel toward you; never force machine.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Daily: Brush lint from bobbin area and feed dogs.
  2. Weekly: Oil machine according to lubrication points in manual.
  3. Monthly: Clean machine exterior with soft, dry cloth.
  4. As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended sewing machine oil.

Accessories

Standard accessories included with Husqvarna 190.

AccessoryPurpose
Standard presser footGeneral sewing
Zigzag footZigzag and decorative stitches
Buttonhole footAutomatic buttonholes
Zipper footInstalling zippers
Button sewing footSewing on buttons
Seam ripperRemoving stitches
BrushCleaning lint
Extra needlesReplacement needles
BobbinsExtra bobbins
ScrewdriverNeedle plate removal

Safety Information

Important safety precautions for sewing machine operation.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower connectionCheck power cord; ensure machine is plugged in; check foot pedal connection.
Thread breakingTension/needle issuesRethread machine; check needle for damage; adjust tension.
Uneven stitchesThreading/tensionRethread top and bobbin; clean bobbin area; adjust tension.
Fabric not feedingFeed dogsCheck feed dog position; clean feed dogs; check presser foot pressure.
Needle breakingInstallation/fabricEnsure needle inserted correctly; use proper needle for fabric; don't pull fabric.
Bobbin issuesWinding/insertionRewind bobbin evenly; ensure bobbin inserted correctly in case.

Service: Contact authorized Husqvarna dealer for technical support and repairs.

Husqvarna 190 Sewing Machine Manual © - All Rights Reserved 2025