Husqvarna 105 Sewing Machine Manual

The Husqvarna 105 is a versatile mechanical sewing machine designed for home use, featuring straight and zigzag stitches, built-in buttonholer, free arm capability, adjustable stitch length and width, built-in needle threader, and multiple presser feet. Powered by standard household electrical outlet with foot pedal control. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Mechanical sewing machine with free arm, built-in stitch patterns, foot pedal control, and multiple accessory feet.

Unpacking and Setup

Unpack all components and inspect for damage during shipping.

1. Remove machine from packaging: Lift from carrying case using handles.
2. Attach power cord: Plug into machine and wall outlet.
3. Install foot pedal: Place on floor in comfortable position.
4. Attach extension table: Snap into place for flat sewing surface.
5. Insert needle: Loosen needle clamp screw, insert needle with flat side to back.

WARNING! Machine is heavy; lift with both hands. Ensure stable surface placement.

First-Time Operation

Prepare machine for initial use with practice fabric.

1. Wind bobbin: Place thread on spool pin, guide through tension disc, wind bobbin.
2. Insert bobbin: Drop bobbin into case with thread running counterclockwise.
3. Thread upper thread: Follow numbered threading guide on machine.
4. Use needle threader: Lower lever to automatically thread needle.
5. Test stitches: Use scrap fabric to practice different stitch settings.

CAUTION! Keep fingers away from needle area during operation.

Technical Specifications

• Machine Type: Mechanical sewing machine
• Stitches: 12 built-in stitches including straight, zigzag, and decorative
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable for zigzag
• Buttonhole: One-step automatic
• Free Arm: Yes, with removable extension table
• Needle System: HAx1 standard domestic needles
• Bobbin: Class 15 transparent bobbin
• Power Supply: 110-120V, 60Hz
• Weight: 12.5 lbs (5.7 kg)

Controls and Settings

Main controls located on front and side of machine body.

Stitch Selection: Turn dial to select desired stitch pattern (straight, zigzag, stretch, decorative).

Stitch Length Dial: Adjust from 0 (darning) to 4 (basting). Normal sewing: 2-2.5.

Stitch Width Dial: Controls zigzag width from 0 (straight) to 5mm.

Reverse Stitch Lever: Hold down to sew in reverse for reinforcement.

Presser Foot Lever: Raises and lowers presser foot.

Handwheel: Manual control of needle position; turn toward you only.

Stitch Selection

Available stitches and their applications:

1. Straight Stitch (Position 1): General sewing, topstitching
2. Zigzag Stitch (Position 2-4): Overcasting, appliqué, stretch fabrics
3. Multiple Zigzag (Position 5): Elastic application, mending
4. Blind Hem (Position 6): Nearly invisible hems
5. Stretch Stitches (Position 7-8): Knits and stretch fabrics
6. Decorative Stitches (Position 9-12): Embellishment and trim
7. Buttonhole (Position B): Automatic one-step buttonholes

Tip: Always test stitch on scrap fabric before sewing project.

Threading and Bobbin

Proper threading ensures smooth operation and quality stitches.

1. Upper Threading: Follow numbered guide: spool pin → thread guide → tension discs → take-up lever → needle.
2. Needle Threader: Lower lever completely, hook catches thread, pull back to thread needle.
3. Bobbin Winding: Push bobbin winder shaft, guide thread through tension spring, press foot pedal.
4. Bobbin Insertion: Drop bobbin into case with thread running counterclockwise, pull thread through slot.
5. Bring Up Bobbin Thread: Hold upper thread, turn handwheel toward you until bobbin thread appears.

WARNING! Ensure presser foot is raised when threading to engage tension discs.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Unplug machine before cleaning or maintenance.
2. Remove needle plate: Use screwdriver to access bobbin area.
3. Clean lint: Use small brush to remove lint from feed dogs, bobbin case, and hook race.
4. Oil machine: Apply 1-2 drops of sewing machine oil to moving parts as indicated in diagram.
5. Replace needle: Change needle after every project or 8 hours of sewing.

CAUTION! Use only sewing machine oil; never spray lubricants.

Accessories Included

Standard accessories provided with Husqvarna 105:

• All-purpose foot (on machine)
• Zipper foot
• Buttonhole foot
• Blind hem foot
• Button sewing foot
• Seam ripper/lint brush
• Additional needles (size 80/12 and 90/14)
• Class 15 bobbins (4 total)
• Screwdriver
• Spool caps and felt pad

Safety Information

Important safety precautions for machine operation.

• Always unplug machine when not in use or during maintenance
• Keep fingers away from moving needle and feed dogs
• Do not pull fabric while sewing - let feed dogs move fabric
• Use proper needle and thread for fabric type
• Ensure adequate lighting in sewing area
• Keep machine clean and free of dust and lint
• Store in dry area away from extreme temperatures
• Supervise children when machine is in use

Troubleshooting

Service: Contact authorized Husqvarna dealer for technical support and repairs.

Warranty: Limited warranty covers manufacturing defects for specified period.