Hobby Sewing Machine 560Z Manual

The Hobby Sewing Machine 560Z is a versatile home sewing machine featuring 60 built-in stitches, automatic needle threader, adjustable stitch length and width, free arm capability, built-in buttonhole function, variable speed control, LED lighting, drop feed for free-motion sewing, and multiple presser feet. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Setup and Installation 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection Guide 7. Advanced Functions 8. Maintenance & Cleaning 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 60 built-in stitches, automatic needle threader, free arm, LED work light, variable speed control, accessory storage compartment.

FeatureDescription
Built-in stitches60 different stitch patterns including utility, decorative, and stretch stitches
Automatic needle threaderEasy threading with push-button mechanism
Free arm capabilityRemovable extension table for sewing cuffs and sleeves
LED work lightBright illumination of sewing area
Variable speed controlAdjustable sewing speed with foot control
Built-in buttonholeOne-step automatic buttonhole function
Drop feedLower feed dogs for free-motion sewing
Stitch length controlAdjustable from 0-4mm
Stitch width controlAdjustable from 0-5mm
Reverse stitchButton for reinforcing stitches

Setup and Installation

Unpack and inspect all components. Place on stable, level surface.

  1. Remove machine from packaging and remove all protective materials.
  2. Attach power cord to machine and plug into AC outlet.
  3. Install foot control pedal and connect to machine.
  4. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.
  5. Wind bobbin: Place thread on spool pin, thread through bobbin winder tension, place bobbin on winder shaft.
  6. Thread machine: Follow threading guide printed on machine.

WARNING! Keep fingers away from needle area during operation. Always turn off machine when threading or changing accessories.

First-Time Operation

Power on machine; test basic functions.

  1. Select straight stitch: Turn stitch selection dial to straight stitch position.
  2. Set stitch length: Adjust to medium setting (2.5mm).
  3. Practice on scrap fabric: Place fabric under presser foot, lower foot, and gently press foot control.
  4. Test reverse: Press reverse button to reinforce stitches.
  5. Experiment with different stitches: Turn selection dial to try various stitch patterns.

CAUTION! Always use proper needle for fabric type. Change needle regularly for best results.

Specifications

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button, thread tension dial.

Side Panel: Power switch, bobbin winder, hand wheel, presser foot lever.

Basic Settings: Stitch selection (dial to desired pattern), stitch length (0-4mm), stitch width (0-5mm), thread tension (adjust for balanced stitches), presser foot pressure (adjust for fabric thickness).

Stitch Selection Guide

Refer to stitch chart for pattern numbers and applications.

  1. Utility Stitches (1-20): Straight, zigzag, stretch, and overcast stitches for basic sewing.
  2. Decorative Stitches (21-45): Ornamental patterns for embellishment.
  3. Quilting Stitches (46-52): Special stitches for quilt piecing and quilting.
  4. Buttonhole Stitch (53): One-step automatic buttonhole.
  5. Blind Hem Stitch (54): For nearly invisible hemming.
  6. Elastic Stitches (55-60): Stretch stitches for knit fabrics.

Tip: Always test stitch on scrap fabric before sewing project.

Advanced Functions

Advanced features for specialized sewing techniques.

  1. Free Arm: Remove extension table for sewing sleeves and cuffs.
  2. Drop Feed: Lower feed dogs for free-motion quilting and darning.
  3. Automatic Needle Threader: Push lever to thread needle automatically.
  4. Twin Needle: Install twin needle for parallel rows of stitching.
  5. Button Sewing: Use button sewing foot for attaching buttons.
  6. Zipper Installation: Use zipper foot for invisible and standard zippers.

WARNING! Use only Hobby brand accessories designed for this machine model.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Daily: Brush lint from bobbin area and feed dogs.
  2. Weekly: Oil machine according to lubrication points diagram.
  3. Monthly: Clean tension discs with soft brush.
  4. As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended sewing machine oil.

Safety Information

Important safety precautions for safe operation.

Troubleshooting

SymptomPossible CauseCorrective Action
Needle breaksWrong needle size, bent needle, improper threadingReplace needle, rethread machine, check needle installation
Thread bunchingImproper threading, tension too tightRethread machine, adjust tension, check bobbin
Skip stitchesDull needle, wrong needle type, improper threadingChange needle, use correct needle for fabric, rethread
Machine jamsThread caught in bobbin areaRemove bobbin case and clean, remove tangled thread
Uneven stitchesIncorrect tension, dirty tension discsAdjust tension, clean tension discs
Machine won't startPower cord disconnected, foot control unpluggedCheck all power connections, ensure foot control is plugged in

Service: Contact authorized Hobby service center for repairs. Customer support: 1-800-HOBBY-SEW

Hobby Sewing Machine 560Z Manual © - All Rights Reserved 2025