Globe Electronic 937 Sewing Machine Manual

The Globe Electronic 937 is a versatile electronic sewing machine featuring multiple stitch patterns, automatic buttonholing, adjustable stitch length and width, built-in needle threader, free arm capability, drop feed for darning and quilting, built-in LED light, reverse stitching, and variable speed control. Powered by 120V AC, this machine is suitable for beginners and experienced sewers alike. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading and Bobbin 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, built-in stitch patterns, automatic needle threader, free arm, drop feed mechanism, LED work light, foot pedal control.

Feature	Description
Stitch Selection Dial	Select from 37 built-in stitches
Automatic Buttonholer	One-step buttonhole function
Stitch Length Control	Adjustable from 0-4mm
Stitch Width Control	Adjustable from 0-5mm
Built-in Needle Threader	Easy needle threading assistance
Free Arm	For sewing cuffs and sleeves
Drop Feed	For darning and free-motion quilting
Reverse Stitch	For securing seams
Variable Speed Control	Foot pedal with speed adjustment
LED Work Light	Illuminates sewing area

Installation & Setup

Unpack and inspect all components. Place on stable, level surface.

Remove machine from packaging and all protective materials
Attach power cord to machine and plug into AC outlet
Install foot pedal and connect to machine
Install needle following proper orientation
Wind and install bobbin according to instructions
Thread upper thread through threading path

WARNING! Keep fingers away from needle area during operation. Always turn off and unplug when not in use.

First-Time Operation

Power on machine; test basic functions.

Select straight stitch pattern
Place fabric under presser foot
Lower presser foot lever
Gently press foot pedal to begin sewing
Practice basic stitching on scrap fabric
Test reverse stitch function
Experiment with different stitch patterns

CAUTION! Always start with needle in highest position. Keep hands clear of moving parts.

Specifications

Stitch Patterns: 37 built-in stitches including utility, decorative, and stretch
Buttonhole: One-step automatic
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Needle Positions: Left, center, right
Presser Feet: Standard, zipper, buttonhole, button sewing, blind hem
Bobbin: Front loading, class 15 transparent
Power Source: 120V AC, 60Hz
Machine Weight: 12.5 lbs
Warranty: 25-year limited

Controls and Settings

Main control panel includes stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

Stitch Selection: Turn dial to select desired stitch pattern (1-37). Stitch Length: Adjust for shorter/longer stitches. Stitch Width: Adjust for zigzag and decorative stitches. Reverse: Hold button for backstitching. Needle Threader: Lower lever to assist threading.

Accessory storage: Built-in compartment for presser feet, bobbins, needles, and other accessories.

Stitch Selection

37 built-in stitches including:

Straight stitch (left, center, right needle positions)
Zigzag stitch
Blind hem stitch
Stretch stitches
Decorative stitches
Buttonhole stitch (one-step)
Satin stitches
Overcast stitches

Tip: Always test stitch on scrap fabric before sewing project.

Threading and Bobbin

Proper threading ensures smooth operation.

Raise needle to highest position
Place spool on spool pin
Follow numbered threading path on machine
Use needle threader for easy threading
Wind bobbin with matching thread
Insert bobbin with thread unwinding counterclockwise
Pull bobbin thread up through needle plate

WARNING! Always use same thread type in bobbin and needle. Use quality thread to prevent breakage.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Unplug machine before cleaning
Remove needle plate to clean lint buildup
Oil moving parts as specified in manual
Wipe exterior with soft, dry cloth
Replace needle regularly (every 8-10 hours of sewing)
Store in dust-free environment when not in use

CAUTION! Never use compressed air to clean machine. Use only recommended sewing machine oil.

Regulatory Information

UL Listed: Certified for safety standards. FCC Part 15: Class B digital device compliance. Copyright © 2025 Globe Sewing Machines; all rights reserved. For technical support, visit www.globesewing.com or contact 1-800-555-SEWING.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Re-thread machine; adjust tension; check for burrs on needle
Needle breaking	Wrong needle/bent needle	Replace needle; ensure proper installation; check for obstruction
Uneven stitches	Incorrect tension/threading	Re-thread; adjust tension; clean race area
Machine not running	Power/foot pedal	Check power connection; ensure foot pedal is plugged in
Bobbin thread bunching	Incorrect bobbin insertion	Remove and reinsert bobbin; ensure thread unwinds correctly

Reset: Turn machine off and unplug for 30 seconds to reset electronics.

Service: 1-800-555-SEWING; www.globesewing.com