Globe Cub 7 Sewing Machine Manual

The Globe Cub 7 is a compact, versatile sewing machine designed for home use, featuring a 7-inch sewing area, built-in stitch patterns, adjustable stitch length and width, built-in needle threader, drop-in bobbin system, free arm capability, LED lighting, foot pedal control, and multiple presser feet. Powered by 110-120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection and Adjustment 7. Threading and Bobbin Winding 9. Maintenance and Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Compact sewing head, built-in stitch patterns, free arm, LED work light, foot pedal, accessory compartment with presser feet.

Feature	Description
Built-in stitches	12 built-in stitch patterns including straight, zigzag, and decorative
Stitch length control	Adjustable from 0-4mm
Stitch width control	Adjustable from 0-5mm for zigzag stitches
Built-in needle threader	Easy needle threading assistance
Drop-in bobbin system	Top-loading bobbin with clear cover
Free arm capability	Removable extension table for sewing cuffs and sleeves
LED work light	Bright illumination of sewing area
Foot pedal control	Variable speed foot control
Reverse stitch button	For reinforcing stitches
Presser feet included	All-purpose foot, zipper foot, buttonhole foot

Unpacking and Setup

Carefully unpack and inspect all components. Place on stable, level surface.

Remove machine from packaging: Lift machine by base, not by handwheel.
Attach power cord: Plug into machine and wall outlet (110-120V).
Install foot pedal: Connect to machine port and place on floor.
Attach extension table: Snap into place for flatbed sewing.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.

WARNING! Machine contains sharp needles and moving parts. Keep fingers away from needle area during operation.

First-Time Operation

Power on machine; LED light should illuminate.

Thread upper thread: Follow numbered threading guide on machine.
Wind bobbin: Place empty bobbin on winder, thread through tension disc.
Insert bobbin: Drop bobbin into case with thread pulling counterclockwise.
Select stitch: Turn stitch selection dial to desired pattern.
Test sew: Place fabric under presser foot, lower foot, and press pedal gently.

CAUTION! Always turn off power when changing needles or performing maintenance.

Specifications

Sewing Area: 7 inches from needle to machine body
Stitch Patterns: 12 built-in stitches
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable for zigzag
Bobbin System: Top-loading drop-in bobbin
Needle System: Standard domestic 15x1 needles
Lighting: LED work light
Power Source: 110-120V AC, 60Hz
Machine Weight: 12 lbs (5.4 kg)
Warranty: 2-year limited warranty

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button, built-in needle threader.

Stitch Selection: Turn dial to select from 12 built-in patterns (straight, zigzag, stretch, decorative). Stitch Length: Adjust for shorter/longer stitches. Stitch Width: Adjust zigzag and decorative stitch width. Reverse: Hold button while sewing to reinforce stitches. Tension: Upper thread tension dial (4-6 for normal fabrics).

Stitch Selection and Adjustment

Select appropriate stitch for your fabric and project.

Straight stitch: Position 1-2, length 2.0-2.5 for most fabrics
Zigzag stitch: Position 3-5, width 3-4 for finishing edges
Stretch stitches: Positions 6-8 for knit fabrics
Decorative stitches: Positions 9-12 for embellishment
Buttonhole: Use buttonhole foot and position 11

Tip: Test stitch on fabric scrap before starting project.

Threading and Bobbin Winding

Proper threading ensures smooth operation.

Upper threading: Raise presser foot, follow numbered guide from spool to needle.
Needle threading: Push needle threader lever down and hook thread through.
Bobbin winding: Place spool on pin, thread through guide, wind until full.
Bobbin insertion: Drop bobbin in case with thread pulling counterclockwise.
Bring up bobbin thread: Hold upper thread, turn handwheel toward you.

WARNING! Always raise needle to highest position before threading.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

Daily: Brush out lint from bobbin area and feed dogs.
Weekly: Oil hook race and moving parts (use sewing machine oil only).
Monthly: Clean tension discs with folded fabric or dental floss.
As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Regulatory Information

UL Listed: Certified for household use in North America. Copyright © 2024 Globe Sewing Machines; trademarks of Globe Manufacturing Co. For technical support, visit www.globesewing.com or contact 1-800-555-SEWING. Made for use in USA and Canada (110-120V systems).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread completely; adjust tension; check for burrs on needle.
Skipped stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle for fabric type.
Machine jams	Thread bunching under fabric	Remove fabric, cut threads, clean bobbin area, rethread.
Uneven stitches	Incorrect tension	Adjust upper tension; ensure bobbin inserted correctly.
No power	Power connection	Check power cord connections; ensure foot pedal plugged in.

Reset: Turn off machine, wait 30 seconds, restart.

Service: 1-800-555-SEWING; www.globesewing.com