Free Westinghouse Sewing Machine Type E Manual

The Westinghouse Sewing Machine Type E is a classic electric sewing machine featuring a durable metal construction, built-in light, reverse stitching capability, multiple stitch patterns, adjustable stitch length and width, free arm design, built-in bobbin winder, and drop feed for darning and free-motion sewing. Powered by standard household electrical outlet with foot pedal control. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Metal body construction, built-in work light, stitch selection dial, tension control, bobbin winder, free arm, foot pedal control.

Unpacking and Setup

Carefully unpack all components and inspect for damage.

1. Remove machine from packaging: Lift by the carrying handle, not by the free arm.
2. Attach power cord: Plug machine end securely into power socket on machine.
3. Position foot pedal: Place on floor in comfortable operating position.
4. Install needle: Loosen needle clamp screw, insert needle with flat side toward back, tighten screw.
5. Connect to power: Plug into standard household electrical outlet.

WARNING! Machine is heavy; use proper lifting technique. Ensure work area is stable and well-lit.

First-Time Operation

Before first use, complete basic setup and threading.

1. Wind bobbin: Place empty bobbin on winder, thread through tension disc, press winder to engage.
2. Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
3. Thread upper thread: Follow numbered threading path on machine.
4. Test stitch: Use scrap fabric to test tension and stitch quality.
5. Adjust settings: Set stitch length and width as needed for your project.

CAUTION! Always turn off machine when threading or changing needles. Keep fingers away from moving needle.

Specifications

• Machine Type: Electric Sewing Machine Type E
• Construction: Metal body with steel gears
• Stitch Patterns: Straight, zigzag, multiple decorative stitches
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable for zigzag
• Bobbin Type: Class 15 transparent bobbin
• Needle System: Standard domestic 15x1 needles
• Power Requirements: 120V AC, 60Hz
• Motor: DC motor with foot pedal control
• Weight: Approximately 25 lbs

Controls and Settings

Main controls located on front and side of machine body.

Stitch Selection: Turn dial to select desired stitch pattern. Tension Control: Adjust dial for proper thread tension (higher numbers for tighter tension). Stitch Length: Control determines distance between stitches. Stitch Width: Adjusts zigzag width; set to 0 for straight stitch. Reverse Stitch: Press and hold lever to sew backwards. Feed Dog Control: Lower for darning and free-motion work.

Threading the Machine

Proper threading is essential for good stitch quality.

1. Raise presser foot and needle to highest position.
2. Place spool on spool pin at top of machine.
3. Follow numbered threading path: Through first thread guide, around tension discs, through take-up lever, down to needle.
4. Thread needle from front to back.
5. Pull up bobbin thread by holding upper thread and turning hand wheel toward you.

Tip: Always thread with presser foot raised to open tension discs.

Basic Sewing Operations

Fundamental sewing techniques for beginners.

1. Straight stitch: Set stitch selection to straight, adjust length as needed.
2. Zigzag stitch: Select zigzag pattern, adjust width for desired zigzag.
3. Reverse stitching: Hold reverse lever to reinforce seam ends.
4. Free arm sewing: Remove extension bed for sewing sleeves and cuffs.
5. Button sewing: Use zigzag stitch with width set to match buttonholes.
6. Darning: Lower feed dogs and move fabric manually for repairs.
7. Gathering: Use longer stitch length and pull bobbin thread to gather fabric.

WARNING! Never sew over pins; remove them as you approach. Keep hands clear of moving needle.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Oil moving parts according to lubrication diagram.
3. Monthly: Clean tension discs with soft brush.
4. As needed: Replace needle after 8-10 hours of sewing.
5. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Accessories

Standard accessories included with Westinghouse Type E machine.

Warranty Information

Westinghouse Sewing Machine Type E comes with 1-year limited warranty covering manufacturing defects. Warranty does not cover damage from misuse, improper maintenance, or unauthorized repairs. For warranty service, contact authorized Westinghouse service center with proof of purchase. Keep original packaging for any potential returns or servicing needs.

Troubleshooting

Service: For technical support, contact Westinghouse Customer Service at 1-800-555-1234 or visit www.westinghousesewing.com