Free Singer Sewing Machine Manual 2517

The Singer Sewing Machine Model 2517 is a versatile mechanical sewing machine designed for home use, featuring straight stitch, zigzag stitch, and buttonhole functions. This manual provides comprehensive guidance on setup, operation, maintenance, and troubleshooting for optimal performance. Below are key sections covering features, threading, stitch selection, maintenance, and common issues.

1. Features at a Glance 2. Installation and Setup 3. Threading the Machine 4. Stitch Selection and Settings 5. Maintenance and Cleaning 6. Troubleshooting Common Issues 7. Accessories and Parts 8. Warranty Information

Features at a Glance

Key components: Built-in stitch patterns, adjustable stitch length and width, free arm design, built-in buttonholer, drop-in bobbin system, and built-in light.

Feature	Description
Built-in Stitches	6 built-in stitches including straight, zigzag, and blind hem
Stitch Length Control	Adjustable from 0-4mm
Stitch Width Control	Adjustable from 0-5mm
Buttonhole	4-step built-in buttonholer
Free Arm	Removable extension table for sewing cuffs and sleeves
Bobbin System	Top drop-in bobbin with clear cover
Tension Control	Adjustable upper thread tension
Presser Feet	Includes zipper foot, buttonhole foot, and all-purpose foot

Installation and Setup

Unpack and inspect all components. Place on stable surface at comfortable height.

Remove machine from packaging and remove all protective materials.
Attach power cord to machine and plug into grounded electrical outlet.
Install foot controller and connect to machine.
Raise presser foot and install needle securely.
Wind bobbin and thread machine following threading guide.

WARNING! Always unplug machine when not in use or when performing maintenance. Keep fingers away from needle during operation.

Threading the Machine

Proper threading is essential for optimal stitch quality.

Raise presser foot and raise needle to highest position.
Place spool on spool pin and guide thread through thread guide.
Pull thread down and through tension discs.
Thread take-up lever from right to left.
Guide thread through needle bar thread guide.
Thread needle from front to back.
Pull about 6 inches of thread under presser foot toward back.

Tip: Always thread with presser foot raised to ensure thread seats properly in tension discs.

Stitch Selection and Settings

Use stitch selection dial to choose desired stitch pattern.

Straight Stitch: Position 0-1, use for basic sewing
Zigzag Stitch: Position 2-4, use for finishing edges and decorative work
Blind Hem: Position 5, use for nearly invisible hems
Stretch Stitch: Position 6, use for knit fabrics

Adjust stitch length and width according to fabric type and project requirements. Test stitches on scrap fabric before beginning project.

Maintenance and Cleaning

Regular maintenance ensures long machine life and consistent performance.

Unplug machine before cleaning.
Remove needle plate and clean lint from bobbin area with brush.
Oil machine according to lubrication points indicated in manual.
Wipe exterior with soft, dry cloth.
Replace needle regularly (every 8-10 hours of sewing).

CAUTION! Use only Singer recommended oil. Do not use household oils.

Troubleshooting Common Issues

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading or tension	Re-thread machine completely; adjust tension
Skip stitches	Bent needle or wrong needle type	Replace needle; ensure correct needle for fabric
Uneven stitches	Incorrect tension or threading	Check threading; adjust upper and bobbin tension
Machine jams	Lint buildup or thread tangled in bobbin	Clean bobbin area; remove tangled thread
Noise during operation	Lack of lubrication or lint	Clean and oil machine according to manual

Accessories and Parts

Standard accessories included with Singer 2517:

All-purpose foot
Zipper foot
Buttonhole foot
Button sewing foot
Seam ripper/lint brush
Needles (assorted sizes)
Bobbins (4)
Screwdriver
Spool pin felt

Replacement parts available through authorized Singer dealers.

Warranty Information

Singer 2517 comes with 25-year limited warranty. Warranty covers defects in materials and workmanship. Does not cover damage from misuse, improper maintenance, or commercial use. For warranty service, contact authorized Singer service center with proof of purchase.

Customer Support: 1-800-4-SINGER | www.singer.com