Free Kenmore 22 Sewing Machine Manual

The Kenmore 22 sewing machine is a versatile household sewing machine featuring multiple stitch patterns, adjustable stitch length and width, built-in buttonholer, free arm capability, drop feed for darning and quilting, built-in needle threader, top drop-in bobbin system, and variable speed control. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Stitch selection dial, stitch length control, stitch width control, reverse stitch button, bobbin winder, free arm, built-in light, foot pedal control.

Unpacking and Setup

Unpack and inspect contents. Place on stable surface.

1. Remove all packaging materials and protective covers
2. Attach power cord to machine and plug into wall outlet
3. Install foot pedal and ensure proper connection
4. Install needle following proper orientation
5. Wind and install bobbin according to instructions
6. Thread machine following threading guide

WARNING! Keep fingers away from needle area during operation. Always turn off and unplug when not in use.

First-Time Operation

Power on machine; follow setup procedures.

1. Select straight stitch pattern on dial
2. Set stitch length to medium (2.5mm)
3. Set stitch width to 0 for straight stitch
4. Place fabric under presser foot and lower foot
5. Gently press foot pedal to begin sewing
6. Practice on scrap fabric before actual projects

CAUTION! Always use proper needle for fabric type. Never pull fabric while sewing.

Specifications

• Stitch Patterns: 22 built-in stitches
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Buttonholes: One-step automatic
• Bobbin System: Top drop-in
• Needle Positions: Left, center, right
• Maximum Sewing Speed: 800 stitches per minute
• Power Source: 120V AC, 60Hz
• Machine Weight: 12.5 lbs
• Included Accessories: Various presser feet, bobbins, needles, seam ripper, brush

Controls and Settings

Main controls located on front and top of machine.

Front Panel: Stitch selection dial, stitch length control, stitch width control, reverse button, bobbin winder.

Stitch Selection: Turn dial to select desired stitch pattern. Stitch Length: Adjust for shorter or longer stitches. Stitch Width: Adjust for wider or narrower zigzag. Reverse: Hold button for reverse stitching. Tension Control: Adjust thread tension (4-5 for normal sewing). Presser Foot Pressure: Adjustable for different fabric weights.

Stitch Selection Guide

Complete guide to all 22 built-in stitches.

1. Straight Stitch: Basic sewing, topstitching
2. Zigzag Stitch: Seam finishing, appliqué
3. Three-Step Zigzag: Stretch fabrics, mending
4. Blind Hem: Nearly invisible hems
5. Overcast: Seam finishing to prevent fraying
6. Shell Tuck: Decorative edge finishing
7. Scallop: Decorative edge stitch
8. Multiple decorative stitches for embellishment

Tip: Always test stitch on scrap fabric before sewing project.

Maintenance and Care

Regular maintenance ensures optimal performance.

1. Clean lint from bobbin area after each project
2. Oil moving parts as specified in manual
3. Replace needle regularly (every 8-10 hours of sewing)
4. Use proper needle type for fabric being sewn
5. Store machine covered when not in use
6. Use only recommended accessories and parts

WARNING! Always unplug machine before cleaning or maintenance.

Regulatory Information

UL Listed: Certified for household use. Copyright © Kenmore; trademarks of Sears Brands LLC. For technical support, visit www.kenmore.com or contact 1-800-469-4669. Made for household use only.

Troubleshooting

Reset: Turn off and unplug for 30 seconds if electronic issues occur.

Service: 1-800-469-4669; www.kenmore.com