feiyue sewing machine manual

The Feiyue Sewing Machine is a versatile household sewing device featuring multiple stitch patterns, adjustable stitch length and width, built-in needle threader, free arm capability, automatic bobbin winding, built-in light, reverse stitching function, and variable speed control. Powered by 110-120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 8. Maintenance & Cleaning 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Sewing machine head, foot pedal, power cord, accessory box with presser feet, bobbins, needles, and seam ripper.

Feature	Description
Built-in stitch patterns	Multiple pre-programmed stitches including straight, zigzag, and decorative
Adjustable stitch length	Control from 0-4mm for different fabric types
Adjustable stitch width	Zigzag width adjustment up to 5mm
Built-in needle threader	Automatic needle threading assistance
Free arm capability	Convertible for sewing sleeves and cuffs
Automatic bobbin winding	Built-in bobbin winding system
Reverse stitch lever	For reinforcing seams at beginning and end
Variable speed control	Foot pedal controls sewing speed
Built-in work light	LED illumination for work area
Drop feed dogs	For free-motion sewing and darning

Installation & Setup

Unpack and inspect all components. Place on stable, level surface.

Remove protective packaging and foam inserts from machine.
Attach power cord to machine and plug into grounded outlet.
Install foot pedal and connect to machine.
Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.
Wind bobbin: Place empty bobbin on winder, thread through tension disc, press pedal to wind.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Power on machine; test basic functions.

Thread upper thread: Follow numbered threading guide on machine.
Insert bobbin: Open bobbin cover, insert bobbin with thread unwinding counterclockwise.
Pull up bobbin thread: Hold upper thread, turn hand wheel toward you to bring up bobbin thread.
Test stitches: Select straight stitch, place fabric under presser foot, lower foot, and sew.
Adjust tension: Test on scrap fabric; adjust tension dial if needed.

CAUTION! Always use correct needle for fabric type. Change needle regularly.

Specifications

Machine Type: Electronic household sewing machine
Stitch Patterns: 12 built-in stitches
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Buttonholes: 1-step automatic
Presser Feet: 4 included (zigzag, zipper, buttonhole, button)
Needle System: HAx1 standard domestic needles
Bobbin: Class 15 transparent bobbins
Power Source: 110-120V AC, 60Hz
Weight: 12 lbs (5.4 kg)

Controls and Settings

Main controls: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button, thread tension dial.

Stitch Selection: Turn dial to select desired stitch pattern (straight, zigzag, stretch, decorative).

Stitch Length: Adjust for fabric thickness (shorter for delicate, longer for heavy fabrics).

Stitch Width: Control zigzag width; set to 0 for straight stitching.

Tension Control: Adjust thread tension (higher numbers for tighter tension).

Reverse Stitch: Press and hold to sew backwards for seam reinforcement.

Stitch Selection

Available stitch patterns and their applications:

Straight Stitch: Basic sewing, topstitching (center needle position)
Zigzag Stitch: Finishing edges, appliqué, stretch fabrics
Blind Hem Stitch: Nearly invisible hems on garments
Stretch Stitch: For knit and stretch fabrics
Decorative Stitches: Multiple patterns for embellishment
Buttonhole Stitch: Automatic 1-step buttonholes

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin

Proper threading ensures smooth operation.

Upper Threading: Follow numbered guide: spool pin → thread guides → tension discs → take-up lever → needle.
Needle Threader: Pull threader lever down, hook thread, release lever to pull thread through needle.
Bobbin Winding: Place bobbin on winder, thread through tension, disengage needle, press pedal.
Bobbin Insertion: Open cover, insert bobbin with thread unwinding counterclockwise, pull thread through slot.
Bring Up Bobbin Thread: Hold upper thread, turn hand wheel toward you until bobbin thread appears.

WARNING! Ensure machine is off when threading. Keep fingers clear of moving parts.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Unplug machine before cleaning.
Remove needle plate: Use screwdriver to access bobbin area.
Clean lint: Use small brush to remove lint from bobbin case and feed dogs.
Oil machine: Apply 1-2 drops of sewing machine oil to moving parts as indicated in diagram.
Replace needle: Change needle after every 8 hours of sewing or for new project.

CAUTION! Use only sewing machine oil. Do not use household oils.

Safety Information

Important safety precautions for operation.

Always unplug machine when not in use or during maintenance
Keep fingers away from needle area while sewing
Do not pull fabric while sewing - let feed dogs move fabric
Use proper needle type and size for fabric
Ensure work area is well-lit and free of obstructions
Keep machine away from water and moisture
Do not operate with damaged cord or plug

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Re-thread machine; adjust tension; check for burrs on needle
Skip stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle for fabric type
Bobbin thread bunching	Incorrect bobbin insertion	Remove and reinsert bobbin; check threading
Machine not running	Power/pedal issues	Check power connection; ensure pedal is plugged in
Uneven stitches	Tension issues	Adjust upper and bobbin tension; clean tension discs
Needle hitting plate	Needle bent/incorrectly installed	Replace needle; ensure needle is fully inserted and tightened

Service: For technical support, contact Feiyue Customer Service at 1-800-555-SEWING or visit www.feiyuesewing.com