Euro Pro Sewing Machine Manual 7130

The Euro Pro Sewing Machine Model 7130 is a versatile household sewing machine featuring multiple stitch patterns, adjustable stitch length and width, built-in buttonholer, free arm capability, automatic needle threader, drop feed for darning and quilting, built-in light, and reverse stitching. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. Getting Started 4. Specifications 5. Controls and Functions 6. Stitch Selection 7. Basic Sewing Operations 8. Advanced Features 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main body with free arm, Foot pedal, Power cord, Bobbins, Needles, Seam ripper, Buttonhole foot, Zipper foot, Instruction manual.

Feature	Description
Stitch patterns	12 built-in stitches including straight, zigzag, and decorative
Automatic buttonholer	One-step buttonhole function
Free arm	Removable extension table for sewing cuffs and sleeves
Automatic needle threader	Easy threading mechanism
Drop feed	For darning, quilting, and free-motion sewing
Built-in light	Illuminates sewing area
Reverse stitch	For securing seams
Stitch length control	Adjustable from 0-4mm
Stitch width control	Adjustable from 0-5mm
Power switch	Main power on/off control

Installation & Setup

Unpack and inspect all contents. Place on stable, flat surface.

Attach power cord: Plug into machine and wall outlet.
Install foot pedal: Connect to machine port.
Thread machine: Follow threading diagram on machine.
Wind bobbin: Use built-in bobbin winder.
Insert bobbin: Place in bobbin case following arrow direction.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

Getting Started

Power on machine; test basic functions.

Select straight stitch: Turn stitch selector to position 1.
Practice on scrap fabric: Use medium weight cotton.
Adjust stitch length: Start with 2.5mm setting.
Practice reverse stitching: Hold reverse button while sewing.
Test different stitches: Experiment with zigzag and decorative patterns.

CAUTION! Always use proper needle for fabric type. Replace bent or dull needles immediately.

Specifications

Model: Euro Pro 7130
Stitches: 12 built-in patterns
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Buttonholes: One-step automatic
Needle System: Standard 15x1
Bobbin: Class 15 transparent
Max Sewing Speed: 800 stitches per minute
Power Source: 120V AC, 60Hz
Weight: 12 lbs (5.4 kg)

Controls and Functions

Front Panel: Stitch pattern selector, Stitch length dial, Stitch width dial, Reverse button, Bobbin winder.

Additional Features: Free arm conversion, Drop feed lever, Built-in light switch, Foot pressure adjustment, Thread tension dial.

Stitch Selection: Turn dial to select from 12 patterns. Stitch Adjustment: Length (0-4mm), Width (0-5mm). Tension: Adjust for different fabrics (normal setting 4-5). Bobbin Winding: Automatic stop when full.

Stitch Selection

12 built-in stitches for various sewing applications.

Straight Stitch (1): Basic sewing, topstitching
Zigzag Stitch (2): Seam finishing, appliqué
3-Step Zigzag (3): Stretch fabrics, mending
Blind Hem (4): Nearly invisible hems
Elastic Stitch (5): Knits and stretch fabrics
Shell Stitch (6): Decorative edges
Scallop Stitch (7): Ornamental sewing
Multiple Decorative Stitches (8-12): Various patterns

Tip: Always test stitch on scrap fabric before sewing project.

Basic Sewing Operations

Step-by-step guide for common sewing tasks.

Straight Seam: Select straight stitch, position fabric, lower presser foot, sew.
Zigzag Finish: Set zigzag stitch, sew along raw edge to prevent fraying.
Reverse Stitching: Begin and end seams with reverse stitch to secure.
Changing Stitches: Always stop with needle in highest position.
Adjusting Tension: Test on scrap; balanced stitch shows equal top/bottom.

WARNING! Never pull fabric while sewing; let feed dogs move fabric.

Advanced Features

Buttonholes: One-step automatic with buttonhole foot. Free Arm: Remove extension table for circular sewing. Drop Feed: Lower feed dogs for darning and quilting. Automatic Needle Threader: Easy threading assistance.

Maintenance & Cleaning

Unplug before maintenance. Clean lint from bobbin area regularly. Oil moving parts as instructed. Replace needles after 8-10 hours of sewing.

CAUTION! Use only sewing machine oil. Never use household oils.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't run	Power connection	Check power cord; ensure foot pedal connected properly.
Thread breaking	Tension/needle	Reduce tension; check for burrs on needle; rethread properly.
Uneven stitches	Threading/tension	Rethread top and bobbin; clean lint; adjust tension.
Needle breaks	Wrong needle/bent	Replace needle; ensure correct size for fabric; don't pull fabric.
Fabric not feeding	Feed dogs/stitch length	Check feed dog position; increase stitch length; clean feed dogs.

Reset: Turn off power, wait 30 seconds, restart.

Service: 1-800-555-1234; www.europro.com