Euro Pro Denim Sewing Machine Model 1260DX Manual

The Euro Pro Denim Sewing Machine Model 1260DX is a heavy-duty sewing machine specifically designed for denim and thick fabrics, featuring 60 built-in stitches, automatic needle threader, adjustable presser foot pressure, built-in LED light, free arm capability, adjustable stitch length and width, reverse sewing function, and drop feed for free-motion sewing. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Heavy-duty metal frame, automatic needle threader, 60 built-in stitches, LED work light, free arm, accessory storage compartment.

Installation & Setup

Unpack and inspect all contents. Place on stable, flat surface.

1. Remove machine from packaging: Lift machine by base, not by handwheel.
2. Install foot controller: Plug into machine port, place on floor.
3. Connect power: Plug power cord into machine and wall outlet.
4. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
5. Wind bobbin: Follow bobbin winding instructions in threading section.

WARNING! Machine is heavy; use proper lifting technique. Ensure stable work surface.

First-Time Operation

Power on machine; follow setup procedure.

1. Thread machine: Follow threading path indicated on machine.
2. Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
3. Select stitch: Turn stitch selection dial to desired pattern.
4. Adjust settings: Set stitch length and width as needed.
5. Test sew: Use scrap fabric to test stitch quality and tension.

CAUTION! Keep fingers away from needle area during operation. Always turn off when not in use.

Specifications

• Model: 1260DX Denim Sewing Machine
• Stitches: 60 built-in stitches
• Stitch Length: Adjustable up to 4mm
• Stitch Width: Adjustable up to 5mm
• Needle Positions: Left, center, right
• Presser Feet: Includes zigzag, zipper, buttonhole, and blind hem feet
• Bobbin: Front-loading, class 15 transparent
• Power Source: 120V AC, 60Hz
• Motor: Heavy-duty 0.8 amp
• Warranty: 25-year limited warranty

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse button, needle up/down button.

Stitch Selection: Turn dial to select from 60 built-in patterns. Stitch Length: 0-4mm adjustment for stitch density. Stitch Width: 0-5mm adjustment for pattern width. Reverse: Hold button for backstitching. Tension: Adjust upper thread tension dial (4-6 for most fabrics). Presser Foot Pressure: Adjust lever for thick/thin fabrics.

Stitch Selection Guide

60 stitches organized by function and fabric type.

1. Straight Stitches: 1-5 for basic sewing and reinforcement
2. Zigzag Stitches: 6-15 for finishing edges and stretch fabrics
3. Decorative Stitches: 16-35 for embellishments and special effects
4. Buttonhole Stitches: 36-40 for various buttonhole styles
5. Blind Hem Stitches: 41-45 for invisible hemming
6. Overcast Stitches: 46-50 for seam finishing
7. Quilting Stitches: 51-55 for patchwork and quilting
8. Specialty Stitches: 56-60 for denim and heavy fabrics

Tip: Refer to stitch chart on machine for visual reference of each pattern.

Threading Instructions

Proper threading ensures smooth operation and quality stitches.

1. Raise presser foot and needle to highest position.
2. Place spool on pin, secure with cap if needed.
3. Follow threading path: Through guides, tension discs, take-up lever.
4. Use automatic needle threader: Push lever down, hook thread through eye.
5. Wind bobbin: Place empty bobbin on winder, guide thread through tension spring.
6. Insert bobbin: Drop into case with thread following "P" shaped path.
7. Pull up bobbin thread: Hold upper thread, turn handwheel toward you.

WARNING! Always thread with power off. Ensure proper tension for even stitches.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Oil hook race and moving parts with sewing machine oil.
3. Monthly: Clean tension discs with folded fabric or dental floss.
4. As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Accessories

Included accessories for various sewing tasks.

Warranty Information

25-year limited warranty covering mechanical parts. 2-year warranty on electrical components. Warranty valid for original purchaser with proof of purchase. Does not cover needles, belts, light bulbs, or damage from misuse. For warranty service, contact Euro Pro Customer Service at 1-800-263-4642 or visit www.europro.com.

Troubleshooting

Service: 1-800-263-4642; www.europro.com