Elna 2005 Sewing Machine Manual

The Elna 2005 is a versatile electronic sewing machine featuring multiple stitch patterns, automatic buttonholer, adjustable stitch length and width, free arm capability, built-in needle threader, drop feed for darning and quilting, variable speed control, and LED lighting. Powered by standard household outlet with voltage compatibility for your region. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Advanced Functions 8. Maintenance & Cleaning 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Electronic stitch selection panel, free arm, built-in LED light, automatic needle threader, bobbin winding system, accessory compartment.

FeatureDescription
Stitch SelectionElectronic dial with 20+ built-in stitches
Automatic ButtonholerOne-step buttonhole function
Free ArmRemovable extension table for cylindrical sewing
Needle ThreaderBuilt-in automatic needle threading system
Variable Speed ControlAdjustable sewing speed with slider
LED LightingBuilt-in bright LED work area illumination
Drop FeedLower feed dogs for darning and free-motion work
Stitch Length/WidthAdjustable settings for customization
Reverse StitchButton for reinforcing stitches
Bobbin WindingBuilt-in bobbin winding system

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

  1. Remove machine from packaging: Lift carefully from carrying case.
  2. Position machine: Place on flat, stable surface at comfortable height.
  3. Connect power: Plug power cord into machine and wall outlet.
  4. Install accessories: Attach foot controller, insert needle, wind bobbin.
  5. Thread machine: Follow threading diagram on machine body.

WARNING! Machine contains sharp needles and moving parts. Keep fingers away from needle area during operation.

First-Time Operation

Power on machine; LED light should illuminate.

  1. Thread machine: Follow numbered threading path; use automatic needle threader.
  2. Wind bobbin: Place empty bobbin on winder, thread through tension disc.
  3. Insert bobbin: Drop bobbin into case following directional arrow.
  4. Select stitch: Turn dial to desired stitch pattern.
  5. Test sew: Use scrap fabric to test stitch quality and tension.
  6. Adjust settings: Modify stitch length/width as needed for project.

CAUTION! Always turn off power when changing needles or performing maintenance.

Specifications

Controls and Settings

Main control panel features: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

Stitch Selection: Turn dial to select from straight stitch, zigzag, stretch stitches, decorative patterns. Stitch Length: Adjust from 0 (darning) to 4mm (basting). Stitch Width: Adjust zigzag and decorative stitch width 0-5mm. Reverse: Hold button for reinforcement stitching.

Additional features: Drop feed lever, bobbin winder position, needle position selector, tension control dial.

Stitch Selection

Available stitch patterns include:

  1. Straight Stitch: Basic sewing, forward and reverse
  2. Zigzag Stitch: Overcasting, appliqué, decorative work
  3. Blind Hem Stitch: Nearly invisible hemming
  4. Stretch Stitches: For knit fabrics
  5. Decorative Stitches: Multiple pattern options
  6. Buttonhole: Automatic one-step buttonhole
  7. Satin Stitch: Dense zigzag for decorative effects

Tip: Always test stitch on scrap fabric of same type as project.

Advanced Functions

Free Arm: Remove extension table for sewing sleeves, cuffs, and other cylindrical items.

  1. Drop Feed: Lower feed dogs for darning, quilting, free-motion work.
  2. Automatic Needle Threader: Lever-assisted threading for easy needle setup.
  3. Buttonhole: One-step automatic buttonhole with sensor.
  4. Variable Speed: Control sewing speed with foot pressure.
  5. Needle Position: Stop with needle up or down as preferred.

WARNING! Never force controls or dials. If resistance is felt, check for obstructions.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Daily: Brush out lint from bobbin area and feed dogs.
  2. Weekly: Oil moving parts as indicated in manual (if required).
  3. Monthly: Clean entire machine, check for worn parts.
  4. Needle Replacement: Change needle after 8-10 hours of sewing.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Accessories

Standard accessories included:

AccessoryUse
General Purpose FootBasic sewing
Zigzag FootDecorative stitches
Buttonhole FootAutomatic buttonholes
Zipper FootInstalling zippers
Button Sewing FootAttaching buttons
Bobbin (3)Extra bobbins
Needles (assorted)Different fabric types
Seam RipperRemoving stitches
BrushLint removal

Safety Information

Important safety precautions for operation:

For support, contact Elna customer service or authorized dealer.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower connectionCheck power cord; ensure foot controller is plugged in properly.
Thread breakingTension/needleCheck threading path; reduce tension; replace needle.
Uneven stitchesTension/threadingRe-thread machine; adjust upper and lower tension.
Fabric not feedingFeed dogsEnsure feed dogs are raised; clean lint buildup.
Needle breakingBent needle/wrong sizeReplace needle; ensure correct needle for fabric.
Bobbin issuesWinding/insertionRewind bobbin evenly; ensure proper insertion direction.
Unusual noiseLint/obstructionClean machine; remove any foreign objects.

Service: Contact authorized Elna service center for repairs.

Elna 2005 Sewing Machine Manual © - All Rights Reserved 2025