Elna 2002 Sewing Machine Manual

The Elna 2002 is a versatile electronic sewing machine featuring multiple stitch patterns, automatic buttonholing, adjustable stitch length and width, free arm capability, built-in needle threader, drop feed for free-motion sewing, and variable speed control. Designed for both beginners and experienced sewers, it offers easy operation with intuitive controls and reliable performance. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Maintenance & Cleaning 8. Accessories 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic stitch selection panel, Free arm, Built-in needle threader, Drop feed mechanism, Variable speed control, Automatic buttonholer.

Feature	Description
Stitch patterns	22 built-in stitches including straight, zigzag, and decorative
Automatic buttonholer	One-step buttonhole for perfect buttonholes every time
Free arm	Removable extension table for sewing cuffs and sleeves
Built-in needle threader	Easy threading with automatic needle threader
Drop feed	Lower feed dogs for free-motion quilting and darning
Variable speed control	Adjustable sewing speed with foot control
Stitch length/width	Adjustable stitch length (0-4mm) and width (0-5mm)
Reverse stitch	Built-in reverse stitching for securing seams
Needle positions	Multiple needle positions for precise sewing
Bobbin system	Top-loading bobbin with clear cover

Installation & Setup

Unpack and inspect contents. Place on stable surface.

Remove machine from packaging: Lift carefully from carrying case.
Attach power cord: Connect to machine and wall outlet.
Install foot control: Plug into machine's foot control port.
Insert needle: Loosen needle clamp screw, insert needle with flat side to back.
Wind bobbin: Place thread on spool pin, guide through tension, wind bobbin.
Thread machine: Follow threading diagram from spool to needle.

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Operation

Power on machine; follow basic setup steps.

Select straight stitch: Turn stitch selection dial to straight stitch position.
Set stitch length: Adjust to medium setting (2.5) for general sewing.
Practice on scrap fabric: Test machine on fabric scraps before actual project.
Adjust tension: Start with default setting (4), adjust if needed for fabric.
Test reverse: Practice reverse stitching to secure seams.

CAUTION! Always start with needle in highest position. Keep work area well-lit.

Specifications

Machine Type: Electronic sewing machine
Stitches: 22 built-in stitches
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Buttonholes: One-step automatic
Needle Positions: Left, center, right
Bobbin: Top-loading Class 15
Max Sewing Speed: 800 stitches per minute
Power Requirements: 110-120V, 60Hz
Weight: 12.5 lbs (5.7 kg)

Controls and Settings

Main control panel: Stitch selection dial, Stitch length dial, Stitch width dial, Reverse stitch button.

Additional Controls: Power switch, Foot control pedal, Bobbin winder, Needle position button, Drop feed lever.

Stitch Selection: Turn dial to select from 22 stitches. Stitch Length: 0-4mm for different fabric types. Stitch Width: 0-5mm for zigzag and decorative stitches. Tension Control: Adjust upper thread tension (0-9). Presser Foot Pressure: Adjustable for different fabric weights.

Stitch Selection

Available stitches: Straight, Zigzag, Blind hem, stretch, overcast, decorative stitches.

Straight stitch: For basic sewing, topstitching, basting
Zigzag stitch: For finishing edges, appliqué, stretch fabrics
Blind hem: Nearly invisible hems on garments
Stretch stitches: For knit fabrics and elastic
Overcast: Prevents fabric fraying
Decorative: Shell, honeycomb, scallop patterns
Buttonhole: Automatic one-step buttonholes

Tip: Always test stitch on fabric scrap before sewing project.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Brush out lint from bobbin area and feed dogs
Weekly: Oil hook race and moving parts (use sewing machine oil only)
Monthly: Clean tension discs with soft brush
As needed: Replace needle after 8-10 hours of sewing
Storage: Cover machine when not in use

WARNING! Unplug machine before cleaning or maintenance. Use only recommended oils.

Accessories

Included accessories: General purpose foot, Zipper foot, Buttonhole foot, Blind hem foot, Darning plate, Seam ripper, Brush, Screwdriver, Spool pins, Bobbins (4), Needles (assorted).

Safety Information

Always unplug when not in use. Keep fingers away from moving needle. Do not operate with damaged cord. Use proper lighting. Keep work area clean and organized.

CAUTION! Never leave machine running unattended. Keep away from children.

Regulatory Information

UL Listed: Complies with UL safety standards. FCC Part 15: Class B digital device. Copyright © 2002 Elna; all rights reserved. For technical support, contact Elna customer service at 1-800-ELNA-HELP or visit www.elna.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Needle breaks	Wrong needle/bent needle	Replace needle; ensure correct type for fabric
Thread bunching	Incorrect threading/tension	Rethread machine; adjust tension settings
Machine won't run	Power/pedal issues	Check power cord; ensure pedal is plugged in
Uneven stitches	Tension/dirty machine	Clean machine; adjust upper and bobbin tension
Fabric not feeding	Feed dogs lowered	Raise feed dogs; check presser foot pressure
Thread breaking	Old thread/tension	Use fresh thread; reduce tension; check needle

Service: 1-800-ELNA-HELP; www.elna.com