E&R Classic Sewing Machine Manual NT22

The E&R Classic Sewing Machine NT22 is a versatile mechanical sewing machine featuring straight stitch, zigzag stitch, buttonhole function, built-in light, free arm capability, adjustable stitch length and width, reverse stitching, built-in thread cutter, drop feed for darning and quilting, and easy bobbin winding system. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Maintenance & Cleaning 8. Accessories 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Mechanical sewing head, stitch selection dial, tension control, presser foot, bobbin system, free arm, built-in light, foot pedal control.

Feature	Description
Stitch Selection Dial	For selecting straight, zigzag, and decorative stitches
Tension Control Dial	Adjusts upper thread tension for perfect stitches
Presser Foot Lever	Raises and lowers presser foot
Bobbin Winder	Built-in bobbin winding system
Free Arm	Removable extension table for cylindrical sewing
Built-in Light	Illuminates sewing area
Reverse Stitch Lever	For reinforcing stitches at beginning and end
Stitch Length Dial	Adjusts stitch length from 0-4mm
Stitch Width Dial	Adjusts zigzag width from 0-5mm
Foot Pedal	Controls sewing speed

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

Remove protective packaging and foam inserts.
Attach foot pedal: Connect to machine port at right side.
Install power cord: Plug into machine and wall outlet.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.
Wind bobbin: Follow bobbin winding instructions.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Power on machine; follow threading sequence.

Thread upper thread: Follow numbered guides from spool to needle.
Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
Raise presser foot and lower needle into fabric.
Start sewing: Press foot pedal gently to begin.
Practice on scrap fabric to adjust tension and stitch settings.

CAUTION! Always turn handwheel toward you. Never force the machine.

Specifications

Type: Mechanical Sewing Machine
Stitches: 22 built-in stitches including straight, zigzag, stretch, and decorative
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable for zigzag
Buttonhole: 4-step manual buttonhole
Speed: Up to 800 stitches per minute
Presser Feet: Standard, zipper, buttonhole, button sewing
Power Source: 120V AC, 60Hz
Weight: 12.5 lbs (5.7 kg)
Warranty: 25-year limited warranty

Controls and Settings

Main controls located on front and right side of machine.

Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch lever, presser foot lever.

Thread tension: Adjust dial (3-5 for normal fabrics). Bobbin tension: Factory set, do not adjust. Needle position: Center position standard. Feed dogs: Lower for darning and free-motion quilting. Light switch: On/off for built-in light.

Stitch Selection

22 built-in stitches for various sewing applications.

Straight Stitch: Position 1-2, for basic sewing
Zigzag Stitch: Position 3-5, for finishing edges
Blind Hem: Position 6, for invisible hems
Elastic Stitch: Position 7-9, for stretch fabrics
Decorative Stitches: Position 10-18, for embellishments
Buttonhole: Position 19-22, 4-step process

Tip: Always test stitch on scrap fabric before sewing project.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Brush out lint from bobbin area and feed dogs
Weekly: Oil hook race and moving parts (use sewing machine oil only)
Monthly: Clean tension discs with soft brush
As needed: Replace needle after 8-10 hours of sewing

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Accessories

Standard accessories included with NT22 model.

Accessory	Purpose
Standard Presser Foot	General sewing
Zipper Foot	Installing zippers
Buttonhole Foot	Making buttonholes
Button Sewing Foot	Attaching buttons
Bobbin (4)	Extra bobbins
Needles (3)	Assorted sizes
Seam Ripper	Removing stitches
Brush	Cleaning lint
Screwdriver	Needle plate removal

Regulatory Information

UL Listed: Certified for electrical safety in North America. Copyright © 2006 E&R Sewing Machines; trademarks of E&R Manufacturing Co. For technical support, visit www.erclassicsewing.com or contact 1-800-555-SEWING. Made for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Re-thread completely; reduce tension; check for burrs on needle.
Needle breaking	Bent needle/wrong size	Replace needle; ensure correct size for fabric; don't pull fabric.
Uneven stitches	Tension imbalance	Adjust upper tension; re-thread bobbin; clean tension discs.
Machine jams	Thread jam in bobbin	Remove needle plate; clean bobbin area; re-thread bobbin.
No power	Power connection	Check power cord; ensure foot pedal connected; check outlet.
Skip stitches	Dull needle/wrong type	Replace needle; use correct needle for fabric type.

Service: 1-800-555-SEWING; www.erclassicsewing.com