dressmaker sewing machine manual model swa-2000

The Dressmaker SWA-2000 is a professional-grade sewing machine designed for home and light commercial use, featuring 200 built-in stitches, automatic needle threader, LCD display, adjustable sewing speed, built-in LED lighting, drop feed for free-motion sewing, automatic bobbin winding, and multiple presser feet. Powered by 110-120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: LCD display panel, automatic needle threader, stitch selection dial, speed control slider, bobbin winding system, built-in LED light, accessory compartment.

Installation

Unpack and inspect contents. Place on stable sewing table.

1. Remove packaging materials and protective covers from machine.
2. Attach power cord to machine and plug into wall outlet.
3. Install foot pedal and connect to machine.
4. Fill accessory compartment with included presser feet and tools.
5. Install needle and thread machine following threading diagram.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable surface before operation.

First-Time Setup

Power on machine; follow initial setup procedure.

1. Thread machine: Follow numbered threading path from spool to needle.
2. Wind bobbin: Place empty bobbin on winder, thread through tension disc.
3. Insert bobbin: Drop bobbin into case following directional arrow.
4. Select basic stitch: Turn stitch dial to straight stitch position.
5. Test sew: Use scrap fabric to test machine operation.
6. Adjust tension: Check stitch formation and adjust tension if needed.

CAUTION! Keep fingers away from needle area during operation. Always turn off when threading.

Specifications

• Model: SWA-2000 Professional Sewing Machine
• Stitches: 200 built-in patterns
• Sewing Speed: 200-850 stitches per minute
• Needle System: HAx1 standard domestic needles
• Bobbin: Class 15 transparent bobbin
• Stitch Length: 0-5mm adjustable
• Stitch Width: 0-7mm adjustable
• Presser Feet: 8 included standard feet
• Lighting: LED work light
• Power Source: 110-120V AC, 60Hz
• Warranty: 25-year limited warranty

Controls and Settings

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, reverse button, needle up/down button.

LCD Display: Shows stitch number, recommended foot, stitch length/width settings, needle position.

Stitch Selection: Turn dial to select from 200 patterns. Stitch Length: Adjust from 0-5mm. Stitch Width: Adjust from 0-7mm. Tension Control: Dial adjustment from 0-9. Speed Control: Slider for slow to maximum speed. Memory: Stores frequently used stitch combinations.

Connecting Accessories

Presser Feet: Snap-on system for quick changes. Bobbin: Drop-in bobbin system. Extension Table: Optional accessory for larger work area.

1. Turn off machine before changing accessories.
2. Align presser foot with ankle and lower presser foot lever.
3. Ensure bobbin is inserted with thread pulling counterclockwise.
4. Connect extension table by sliding into position on free arm.

Tip: Always use correct presser foot for selected stitch pattern.

Basic Sewing Operations

Supports straight stitch, zigzag, stretch stitches, and decorative patterns.

1. Select stitch: Turn dial to desired pattern number.
2. Adjust settings: Set length, width, and tension as needed.
3. Position fabric: Lower presser foot and begin sewing.
4. Reverse: Hold reverse button to secure stitches at beginning/end.
5. Automatic needle threader: Push lever down and hook thread through needle.
6. Buttonhole: Select buttonhole pattern, place button in foot, start automatic cycle.
7. Zipper installation: Use zipper foot for invisible and standard zippers.
8. Blind hem: Fold fabric and use blind hem foot for invisible hems.

WARNING! Never pull fabric while sewing; let feed dogs move fabric. Always use correct needle for fabric type.

Advanced Functions

Memory Function: Store up to 10 favorite stitch combinations. Monogramming: Built-in alphabet stitches for personalization. Quilting: Extended table and walking foot for even feeding. Free-motion: Drop feed dogs for decorative stitching and darning.

Care & Maintenance

Unplug before cleaning. Remove lint buildup from bobbin area and feed dogs regularly. Oil moving parts as directed in maintenance schedule.

CAUTION! Use only sewing machine oil. Never use household oils. Keep machine covered when not in use.

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. Copyright © 2025 Dressmaker Sewing Company; trademarks of Dressmaker International. For technical support, visit www.dressmakersupport.com or contact 1-800-555-SEWING.

Troubleshooting

Reset: Turn machine off and unplug for 2 minutes to reset computer.

Service: 1-800-555-SEWING; www.dressmakersupport.com