Dragonfly Sewing Machine Manual

The Dragonfly Sewing Machine is a versatile household sewing machine featuring multiple stitch patterns, automatic needle threading, adjustable stitch length and width, built-in LED lighting, free arm capability, drop feed for free-motion sewing, and easy bobbin winding system. Powered by 110-120V AC, this machine is suitable for beginners and experienced sewers alike. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection Guide 7. Threading and Bobbin 8. Maintenance & Cleaning 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Main sewing unit, Foot pedal, Power adapter, Bobbins, Needles, Seam ripper, Brush, Screwdriver, Instruction manual.

Feature	Description
Stitch Patterns	12 built-in stitches including straight, zigzag, and decorative
Automatic Needle Threader	Easy threading with built-in mechanism
Adjustable Stitch Length	0-4mm length adjustment
Adjustable Stitch Width	0-5mm width adjustment for zigzag stitches
Free Arm	Convertible for sewing cuffs and sleeves
Built-in LED Light	Illuminates sewing area
Drop Feed	For free-motion sewing and quilting
Reverse Stitch	Reinforce seams with reverse sewing
Bobbin Winding	Built-in bobbin winding system
Thread Tension	Adjustable upper thread tension

Unpacking and Setup

Carefully unpack all components and place on stable surface.

Remove protective packaging and styrofoam inserts
Attach foot pedal to machine using provided cable
Connect power adapter to machine and wall outlet
Install needle following threading diagram
Wind and insert bobbin according to instructions

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Operation

Power on machine; follow setup procedures.

Thread machine: Follow numbered threading path on machine
Insert bobbin: Place bobbin in case with thread unwinding counterclockwise
Select stitch: Turn stitch selection dial to desired pattern
Adjust settings: Set stitch length and width as needed
Test sew: Use scrap fabric to test stitch quality

CAUTION! Always start with needle in highest position. Keep work area clean and organized.

Specifications

Stitch Patterns: 12 built-in stitches
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Max Sewing Speed: 800 stitches per minute
Needle Positions: Left, center, right
Presser Feet: 4 included (all-purpose, zipper, buttonhole, button)
Bobbin Type: Class 15 transparent
Needle Type: Standard domestic 130/705 H
Power Source: 110-120V AC, 60Hz
Weight: 12.5 lbs (5.7 kg)

Controls and Settings

Main controls: Power switch, Stitch selection dial, Stitch length dial, Stitch width dial, Reverse stitch button, Bobbin winder, Handwheel.

Adjustment Features: Thread tension dial, Presser foot pressure, Needle position selector, Feed dog control, Light switch.

Stitch Selection: Straight stitch (1-4), Zigzag (5), Multiple zigzag (6), Blind hem (7), Elastic stitch (8), Decorative stitches (9-12). Settings: Stitch length (0-4mm), Stitch width (0-5mm), Thread tension (0-9), Reverse stitch length.

Stitch Selection Guide

Choose appropriate stitch for your fabric and project type.

Straight Stitch (1-4): Basic sewing, seams, topstitching
Zigzag Stitch (5): Finishing edges, stretch fabrics, appliqué
Multiple Zigzag (6): Elastic application, decorative effects
Blind Hem (7): Nearly invisible hems on garments
Elastic Stitch (8): Sewing elastic, decorative stretch seams
Decorative Stitches (9-12): Embellishment, special effects

Tip: Test stitch on fabric scrap before starting project.

Threading and Bobbin

Proper threading ensures smooth operation.

Raise needle to highest position using handwheel
Place spool on spindle and follow numbered threading path
Use automatic needle threader if equipped
Wind bobbin: Place empty bobbin on winder, guide thread through tension disk
Insert bobbin: Drop into case with thread pulling counterclockwise
Pull bobbin thread up through needle plate

WARNING! Always use same thread type in needle and bobbin.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Unplug machine before cleaning
Remove needle plate and clean lint buildup
Oil moving parts with sewing machine oil only
Wipe exterior with soft, dry cloth
Replace needle after 8-10 hours of sewing

CAUTION! Never use compressed air; it can force lint into mechanism.

Accessories

Included accessories: All-purpose foot, Zipper foot, Buttonhole foot, Button sewing foot, Seam ripper, Brush, Screwdriver, Extra needles, Bobbins, Spool cap, Duster.

Optional Accessories: Quilting foot, Walking foot, Blind hem foot, Rolled hem foot, Embroidery foot.

Safety Information

FCC Part 15: Class B digital device; complies with residential interference limits. UL Listed for household use. Copyright © 2025 Dragonfly Sewing Products; all rights reserved. For support, visit www.dragonflysewing.com or contact 1-800-555-1234.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread completely; adjust tension; check for burrs on needle
Uneven stitches	Wrong needle/tension	Replace needle; adjust tension; clean feed dogs
Machine jams	Thread buildup	Remove needle plate; clean lint; rethread
Needle breaks	Bent needle/wrong size	Replace needle; ensure correct insertion; check for obstructions
Fabric not feeding	Feed dogs lowered	Raise feed dogs; check presser foot pressure
Poor buttonholes	Wrong foot/tension	Use buttonhole foot; stabilize fabric; adjust tension

Reset: Unplug for 30 seconds if electronic issues occur.

Service: 1-800-555-1234; www.dragonflysewing.com