Designer 1 Sewing Machine Manual

The Designer 1 Sewing Machine is a professional-grade computerized sewing machine with 500 built-in stitches, automatic needle threader, LCD touchscreen display, built-in embroidery capabilities, automatic tension control, speed control slider, knee lifter, and multiple presser feet. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: LCD touchscreen display, automatic needle threader, built-in embroidery unit, bobbin winding system, multiple presser feet, knee lifter, and USB port for design import.

Installation

Unpack and inspect contents. Place on stable sewing table.

1. Remove packaging materials and protective covers.
2. Place machine on sturdy, level surface with adequate lighting.
3. Install foot controller: Plug into designated port on machine.
4. Connect power cord: Plug into machine and wall outlet.
5. Install bobbin case and thread machine according to threading diagram.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable surface placement.

First-Time Setup

Power on sewing machine; follow on-screen setup wizard.

1. Language selection: Choose preferred language from setup menu.
2. Date and time: Set current date and time for file management.
3. Needle position: Set default needle position (up or down).
4. Thread tension: Perform automatic tension calibration.
5. Test stitches: Run test stitches on scrap fabric.

CAUTION! Keep fingers away from needle area during operation. Always turn off power when threading.

Specifications

• Stitch Capacity: 500 built-in stitches
• Embroidery Designs: 150 built-in designs
• Sewing Speed: 100-850 stitches per minute
• Needle Positions: Adjustable left/right position
• LCD Display: 4.3-inch color touchscreen
• Memory: 5MB internal memory for designs
• Presser Feet: 10 included specialized feet
• Power Source: 120V AC, 60Hz
• Dimensions: 18.5" x 8.5" x 12.5"
• Weight: 25.5 lbs

Controls and Settings

Access functions via LCD touchscreen or physical buttons. Front Panel: POWER, START/STOP, NEEDLE UP/DOWN, REVERSE.

Touchscreen Controls: Stitch selection, embroidery design browser, settings menu, stitch editing, file management.

Basic Settings: Stitch length (0-5mm), stitch width (0-7mm), needle position, thread tension, speed control. Advanced Settings: Mirror imaging, stitch elongation, pattern combination, memory functions. Embroidery Settings: Design rotation, resizing, color sequence editing.

Connecting Accessories

Foot Controller: Plug into front port. Embroidery Unit: Attach to machine front. USB Device: Connect to USB port for design transfer.

1. Turn off machine before connecting accessories.
2. Align embroidery unit with mounting points and slide into place.
3. Insert USB device before powering on for automatic recognition.
4. Select appropriate presser foot for current sewing task.

Tip: Always use genuine accessories designed for Designer 1 model.

Basic Sewing Operations

Supports straight stitch, zigzag, buttonhole, and decorative stitching.

1. Thread machine: Follow automatic threading guide or manual path.
2. Select stitch: Choose from stitch library on touchscreen.
3. Adjust settings: Modify length, width, and tension as needed.
4. Begin sewing: Use foot controller or start/stop button.
5. Reverse stitching: Engage reverse for seam reinforcement.
6. Thread cutting: Use automatic thread cutter or manual cutter.
7. Bobbin monitoring: Check bobbin thread level indicator.
8. Needle changing: Always turn off power when changing needles.

WARNING! Never sew over pins. Keep hands away from moving parts.

Embroidery Features

Built-in embroidery unit with 150 designs and USB import capability.

1. Attach embroidery unit and hoop fabric securely.
2. Select design from library or imported designs.
3. Position design using alignment marks and touchscreen controls.
4. Thread appropriate colors for multi-color designs.
5. Start embroidery process; machine will pause for color changes.
6. Monitor progress through LCD display.

Design Editing: Resize, rotate, combine designs. File Management: Save/load designs to internal memory or USB.

Care & Maintenance

Unplug before cleaning. Regular maintenance ensures optimal performance.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Oil designated points with sewing machine oil.
3. Monthly: Clean internal mechanisms and check for wear.
4. As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Use only recommended sewing machine oil. Never use household oils.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL Listed for electrical safety. Copyright © 2025 Designer Sewing Machines; all rights reserved. For technical support, visit www.designersewing.com or contact 1-800-555-1234.

Troubleshooting

Reset: Settings > System > Factory Reset if persistent issues.

Service: 1-800-555-1234; www.designersewing.com